Simulation Research of Closed Control System for Equipment Operation and Maintenance with Parts Inventory System

doi:10.16182/j.issn1004731x.joss.201810027

Abstract

Abstract: The highly reliable equipment operation and maintenance system is very important to enterprise’s safety production. The control system for equipment operation and maintenance with a parts inventory system is generally discussed. The proposed system is composed of a parts inventory subsystem, an equipment operation subsystem and an equipment maintenance subsystem as parallel and series form. And the control system belongs to a multi-level closed loop system. The system is a kind of discrete event dynamic system. So it is difficult to be described with traditional mathematical analysis methods. The multi-class closed control system simulation model is established with Simulink software and the numerical experiments are given. Then the impact of equipment failure rate, maintenance channel size and maintenance efficiency are analyzed. And the effect of ordering strategy on the parts inventory cost is discussed.

Key words: equipment operation and maintenance, closed loop control system, queuing network, numerical simulation

CLC Number:

Li Bing, Wang Xing, Xuan Hua, Wang Xueyuan. Simulation Research of Closed Control System for Equipment Operation and Maintenance with Parts Inventory System[J]. Journal of System Simulation, 2018, 30(10): 3817-3825.

References

[1] Sipahi R, Delice I.Stability of inventory dynamics in supply chains with three delays[J]. International Journal of Production Economics (S0925-5273), 2010, 123(1): 107-117.
[2] Zheng C Z, Liu Z X, Liu D.Replenishment and equipment maintenance policies considering stochastic spare parts deterioration[J]. Computer Integrated Manufacturing Systems (S0736-5845), 2010, 16(10): 2129-2138.
[3] Zhang C, Wang H Y.Analysis of stability and bullwhip effectin production-inventory systems[J]. Journal of Southeast University (S1003-7985), 2011, 27(1): 101-106.
[4] Chen M, Zhuo F.Repairable spare parts inventory optimization with recovery rate depending on continuous time-varying demand[J]. Computer Integrated Manufacturing Systems (S0736-5845), 2012, 18(5): 1087-1092.
[5] Selcuk B.An adaptive base stock policy for repairable item inventory control[J]. International Journal of Production Economics (S0925-5273), 2013, 143(2): 304-315.
[6] Jiang Y P, Chen Mao Y, Zhou D H.Joint optimization of preventive maintenance and inventory policies for multi-unit systems subject to deteriorating spare part inventory[J]. Journal of Manufacturing Systems (S0278-6125), 2015, 35(4): 191-205.
[7] 任南, 杜强. 基于VMI策略的常用备件库存控制研究[J]. 科学技术与工程, 2012, 12(7): 1580-1583.
Ren Nan, Du Qiang.A study on common spare parts inventory control based on VMI strategy[J]. Science Technology and Engineering (S1671-1815), 2012, 12(7): 1580-1583.
[8] 杨建华, 宋扬. 大型装备备件库存系统动力机制研究[J]. 系统仿真学报, 2014, 26(7): 1589-1597.
Yang Jianhua, Song Yang.Dynamic mechanism of spare parts inventory system for large scale equipment[J]. Journal of System Simulation (S1004-731X), 2014, 26(7): 1589-1597.
[9] 张志华, 应新雅, 费广玉. 串联系统备件满足率分配及配置优化[J]. 系统工程理论与实践, 2015, 35(11): 2987-2992.
Zhang Zhihua, Ying Xinya, Fei Guangyu.Series system spares fill rate allocation and optimization[J]. System Engineering Theory and Practice (S1000-6788), 2015, 35(11): 2987-2992.
[10] Kim J S, Shin K C, Yu H K.Optimal algorithm to determine the spare inventory level for a repairable-item inventory system[J]. Computers and Operations Research (S0305-0548), 1996, 23(3): 289-297.
[11] Diza A, Fu M C.Models for multi-repairable item inventory system with limited repair capacity[J]. European Journal of Operational Research (S0377-2217), 1997, 97(3): 480-492.
[12] Jung B R, Sun B G, Kim J S.Modeling lateral transshipments in multi-echelon repairable item inventory systems with finite repair channels[J]. Computers & Operations Research (S0305-0548), 2003, 30(9): 1401-1417.
[13] Rappold J A, Van R B D. Designing multi-echelon service parts networks with finite repair capacity[J]. European Journal of Operational Research (S0377-2217), 2009, 199(3): 781-792.
[14] Mirzahosseinian H, Piplani R.A study of repairable parts inventory system operating under performance-based contract[J]. European Journal of Operational Research (S0377-2217), 2011, 214(2): 256-261.
[15] 阮智, 李庆民, 黄傲林. 有限维修渠道约束下多级维修供应系统库存控制[J]. 航空学报, 2012, 33(11): 2018-2027.
Ruan Zhi, Li Qingmin, Huang Aolin.Inventory control of multi-echelon maintenance supply system under finite repair channel constraint[J]. Acta Aeronautica et Astronautica Sinica (S1000-6893), 2012, 33(11): 2018-2027.
[16] 罗祎, 阮旻智, 袁志勇. 多级维修供应下可修复备件库存建模与优化[J]. 系统工程理论与实践, 2013, 33(10): 2623-2630.
Luo Y, Ruan M Z, Yuan Z Y.Modeling and optimization of repairable spare parts under the multi-echelon maintenance supply[J]. System Engineering Theory and Practice (S1000-6788), 2013, 33(10): 2623-2630.
[17] 夏国清, 陈红召, 栾添添. 有限维修渠道下两级维修供应系统性能评估模型[J]. 系统工程理论与实践, 2015, 35(4): 1041-1047.
Xia Guoqing, Chen Hongzhao, Luan Tiantian.Performance evaluation model of two level maintenance supply system under limited maintenance channel[J]. System Engineering Theory and Practice (S1000-6788), 2015, 35(4): 1041-1047.