[1] 刘永云, 孙传俊, 王振, 等. 数控粗加工走刀和进刀方式的研究[J]. 模具制造, 2007, 2: 62-65. Liu Yongyun, Sun Chuanjun, Wang Zhen, et al.Research on Tool Path mode and Fees Mode in Numerical Control Rough Maching[J]. Die&Mould Manufacture, 2007, 2: 62-65. [2] 李居莉. 基于T样条的车身点云曲面重构技术研究[D]. 山东: 山东理工大学, 2014. Li Juli.The Research on Method of Automobile Body Point Cloud Surface Reconstraction Technology Based on T splines[D]. Shandong: Shandong University of Technology, 2014. [3] Anonymous. T-Splines, Inc. T-Splines Version 3 Organic Modeling for Rhino Design Program Released[J]. Transportation Business Journal (S2210-5395), 2011, 13(4): 3915-3921. [4] 何钢, 廖文和, 刘浩, 等. Catmull-Clark细分曲面的变距离偏置[J]. 东南大学学报(自然科学版), 2008, 3: 424-428. He Ggang, Liao Wenhe, Liu Hao, et al.Variable offset of Catmull-Clark subdivision surface[J].Journal of Southeast University(Natural Science Edition, 2008, 3: 424-428. [5] 严涛, 刘志兵, 王西彬, 等. 基于四点偏置法的非可展直纹面侧铣刀位计算[J]. 图学学报, 2015, 36(6): 840-845. Yan Tao, Liu Zhibin, Wang Xibinm, et al.Cutter Location Calculation Based on the Four Offset Method of Flank Milling for Undevelopable Ruled Surface[J]. Journal of Graphics, 2015, 36(6): 840-845. [6] 曹利新, 薛亚峰. 闭式叶轮通道五轴数控粗加工刀具路径规划[J]. 大连理工大学学报, 2013 (4): 514-520. Cao Lixin, Xue Yafeng.Tool-path planning for 5-axis nc rough machining of closed impeller channel[J]. Journal of Dalian University of Technology, 2013(4): 514-520. [7] Mehmet nder, H. Hüseyin Uurlu. Dual Darboux Frame of a Timelike Ruled Surface and Darboux Approach to Mannheim Offsets of Timelike Ruled Surfaces[J]. Proceedings of the National Academy of Sciences, India Section A: Physical ciences, 2013, 83(2), 163-169. [8] 单晨伟, 廖恺, 成宏军, 等. 一种叶片截面线光顺及等距面生成方法[J]. 航空制造技术, 2015, 470(1/2): 115-118. Shan Chenwei, Liao Kai, Cheng Hongjun, et al.Method of Cross-Section Curve Fairing and Generation of Equigistant Offset Surface For Blade Surface[J]. Aeronautical Manufacturing Technology | Aeron Manuf Technol, 2015, 470(1/2): 115-118. [9] 徐金亭, 刘伟军, 卞宏友, 等. 基于网格曲面模型的等残留刀位轨迹生成方法[J]. 机械工程学报, 2010, 46(11): 193-198. Xu Jinting, Liu Weijun, Bian Hongyou, et al.Constant Scallop Tool Path for Triangular Surface Machining[J]. Journal of Mechanical Engineering, 2010, 46(11): 193-198. [10] 杨红涛, 刘伟军, 张鸣, 等. 复杂曲面投影法精加工刀轨生成[J]. 机械设计与制造, 2012(2): 197-199. Yang Hongtao, Liu Weijun, Zhang Ming, et al.Projection complex surface finishing tool path generation[J]. Machinery Design & Manufacture, 2012(2): 197-199. [11] 严思杰, 周云飞, 赖喜德, 等. 多轴加工刀轨最优行距计算方法研究[J]. 航空精密制造技术, 2006, 42(5): 35-38. Yan Sijie, Zhou Yunfei, Lai Xide, et al.Research on the Method of Calculating the Cutter Location Optimal Path Interval in Muti-Axis Machining[J]. Aviation Precision Manufacturing Technology, 2006, 42(5): 35-38. [12] 段振云, 宋扬, 赵文辉. 点云直接生成模具数控程序的算法研究[J]. 机械, 2015(4): 23-26. Duan Zhenyun, Song Yang, Zhao Wenhui.Study on the algorithm of generating mould NC program by point cloud directly[J]. Machinery, 2015(4): 23-26. [13] 乔桂新, 温维亮, 郭新宇, 等. 基于T样条拼接的彩椒果实可视化研究[J]. 系统仿真学报, 2012, 24(6): 1227-1231. Qiao Guixin, Wen Weiliang, Guo Xinyu, et al.Research on Visualization of Bell Pepper Fruit Based on T-Splines Merging[J]. Journal of System Simulation, 2012, 24(6): 1227-1231. [14] Ahmad H Nasri, Khaled Sinno, Jianmin Zheng.Local T-spline surface skinning[J]. The Visual Computer (S0178-2789), 2012, 28(6): 787-797. |