基于电流源的超高频感应加热电路仿真分析

doi:10.16182/j.issn1004731x.joss.201708029

系统仿真学报 ›› 2017, Vol. 29 ›› Issue (8): 1858-1865.doi: 10.16182/j.issn1004731x.joss.201708029

基于电流源的超高频感应加热电路仿真分析

马莽原, 石新春, 王慧, 孟建辉

华北电力大学,河北保定 071003

收稿日期:2016-08-08 发布日期:2020-06-01
作者简介:马莽原(1982-),男,河南南阳,博士生,研究方向为电力电子与电气传动;石新春(1950-),男,河北保定,硕士,教授,研究方向为电力电子与电气传动。

Simulation and Analysis of Ultra High Frequency Induction Heating Circuit Based on Current Source

Ma Mangyuan, Shi Xinchun, Wang Hui, Meng Jianhui

North China Electric Power University, Baoding 071003, China

Received:2016-08-08 Published:2020-06-01

摘要/Abstract

摘要： 固态超高频感应加热电源的主电路决定了电源的工作频段、工作方式和输出功率,选择一种合适的主电路对电源有决定性的影响。在参考E类电路和Boost升压斩波电路的基础上,采用能量守恒和傅里叶分解的方法,深入分析了一种新的电流源并联谐振电路的工作原理,解析了该电路各个参数之间的数学关系,为该电路的应用提供了理论依据。针对不同的参数,利用Matlab/Simulink进行仿真,得出各个参数不同取值时的仿真波形,通过仿真波形得到的信息与理论分析进行对比,可以得知仿真结果完全符合理论分析,同时得到该电路达到最优工作状态的条件,证明了该电路的实用性。

关键词: 电流源, 并联谐振, 超高频, 感应加热, 仿真

Abstract: The operating frequency range, operating mode and output power are determined by the circuit. A suitable circuit is very important for induction heating power supply. On the basis of Class-E and Boost Chopper circuit, a new current source was analyzed with parallel resonant load circuit by energy conservation law and Fourier decomposition, which derived mathematical relation among the parameters and provided application theory. This circuit was studied by using Matlab/Simulink with variable parameters, which obtained the operating waves with different parameters and values. Comparing the operating waves with the theoretical analysis, the simulation results are completely consistent with the theoretical analysis, which obtains optimal working conditions and indicates circuit applicability.

Key words: current source, parallel resonant, ultra-high-frequency, induction heating, simulation

中图分类号:

TP391.9

马莽原, 石新春, 王慧, 孟建辉. 基于电流源的超高频感应加热电路仿真分析[J]. 系统仿真学报, 2017, 29(8): 1858-1865.

Ma Mangyuan, Shi Xinchun, Wang Hui, Meng Jianhui. Simulation and Analysis of Ultra High Frequency Induction Heating Circuit Based on Current Source[J]. Journal of System Simulation, 2017, 29(8): 1858-1865.

参考文献

[1] Hinchliffe S, Hobson L.High Power Class-E Amplifier for High-Frequency Induction Heating Applications[J]. Electronics Letters (S0013-5194), 1988, 24(14): 886-888.
[2] Hinchliffe S, Hobson L. High-Frequency (>1 MHz) Convertors for Induction Heating Applications[J]. Electronics Letters (S0013-5194), 1988, 24(11): 697-698.
[3] Hideaki Fujita, Hirofumi Akagi.A 2 MHz 2 kW Voltage-Source Inverter for Low-Temperature Plasma Generators: Implementation of Fast Switching with a Third-Order Resonant Circuit[J]. IEEE Transactions on Industry Applications (S0093-9994), 1999, 35(1): 21-27.
[4] Hideaki Fujita, Hirofumi Akagi, Shin-ichi Shinohara. A 2 MHz 6 kVA Voltage-Source Inverter Using Low-Profile MOSFET Modules for Low-Temperature Plasma Generators[J]. IEEE Transactions on Power Electronics (S0885-8993), 1999, 14(6): 1014-1020.
[5] Puyal D, Bemal C, Burdio J M, et al.Dual 1.5 MHz 3.5 kW Versatile Half-Bridge Series-Resonant Inverter Module for Inductive Load Characterization[C]// APEC 07-Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition. USA: IEEE, 2007: 1133-1139.
[6] Diego Puyal, Carlos Bernal, José M Burdío, et al.Versatile High-Frequency Inverter Module for Large-Signal Inductive Loads Characterization Up to 1.5 MHz and 7 kW[J]. IEEE Transactions on Power Electronics (S0885-8993), 2008, 23(1): 75-87.
[7] 李时峰, 吕默影, 陈辉明. 一种新型超高频感应加热混合全桥逆变器[J]. 电工技术学报, 2013, 28(3): 215-221.
(Li Shifeng, Lü Moying, Chen Huiming.A Novel Hybrid Full-Bridge Inverter for Ultra-High Frequency Induction Heating Applications[J]. Transactions of China Electrotechnical Society, 2013, 28(3): 215-221.)
[8] 张智娟, 邓朝昀. LLC负载超高频谐振逆变器并联特性研究[J]. 电源技术与应用, 2015, 41(5): 134-140.
(Zhang Zhijuan, Deng Chaoyun.Research on ultra high frequency voltage resonant inverter parallel characteristics based on LLC load[J]. Power Supply Technology and Its Application, 2015, 41(5): 134-140.)
[9] 胡聪权, 赵丽君, 马良, 等. 双开关T型并联谐振逆变器拓扑结构研究[J]. 电力电子技术, 2012, 46(8): 71-73.
(Hu Congquan, Zhao Lijun, Ma Liang, et al.Research on topological structure of double switch T-typle parallel resonant inverter[J]. Power Electronics, 2012, 46(8): 71-73.)

[1]	陆淼嘉, 黄承媛, 滕靖. 基于多智能体的网购生鲜无人车配送调度仿真[J]. 系统仿真学报, 2022, 34(6): 1185-1195.
[2]	陆承, 靳学胜. 基于Steam VR的交互仿真水枪灭火训练系统设计[J]. 系统仿真学报, 2022, 34(6): 1312-1319.
[3]	倪凌佳, 黄晓霞, 李红旮, 张子博. 基于协作式深度强化学习的火灾应急疏散仿真研究[J]. 系统仿真学报, 2022, 34(6): 1353-1366.
[4]	胡冰山, 程科, 陆盛, 喻洪流. 变刚度储能助力髋外骨骼设计及助力效果仿真[J]. 系统仿真学报, 2022, 34(5): 1090-1100.
[5]	古鹏飞, 张霖, 陈真, 叶俊杰. 基于X语言的起飞场景民机协同设计与仿真一体化方法[J]. 系统仿真学报, 2022, 34(5): 929-943.
[6]	刘文正, 张和明. 面向复杂系统运动仿真的信息物理融合建模[J]. 系统仿真学报, 2022, 34(5): 954-963.
[7]	于帆, 罗东琦, 司宾强, 朱纪洪. 可交互式相控阵雷达DOA估计仿真系统设计[J]. 系统仿真学报, 2022, 34(5): 964-977.
[8]	付建林, 丁国富, 张剑, 江海凡, 郭沛佩. 基于响应面和NSGA-II的AGV系统多目标优化配置[J]. 系统仿真学报, 2022, 34(5): 994-1002.
[9]	李伟, 张欢, 马萍, 杨明. 云仿真系统可信度评估问题探讨[J]. 系统仿真学报, 2022, 34(4): 679-687.
[10]	刘永奎, 曾鸣, 张霖, 郭金维, 原思阳, 平垚垚. 基于微服务架构的云制造调度仿真系统设计与开发[J]. 系统仿真学报, 2022, 34(4): 700-711.
[11]	张立峰, 王会忍. 基于卷积神经网络及有限元仿真的电容层析成像图像重建[J]. 系统仿真学报, 2022, 34(4): 712-718.
[12]	马庆禄, 张琳, 袁新新, 刘丰杰. 城市道路交通多状态演化下的连续仿真技术研究[J]. 系统仿真学报, 2022, 34(4): 847-855.
[13]	吴枫, 刘秀罗, 王佳, 刘阳, 李苏疆, 仲妍. 航天发射可视化仿真分析技术与应用研究[J]. 系统仿真学报, 2022, 34(4): 856-869.
[14]	姚红光, 肖恢翚, 张航. 无标度物流网络中延误扩散临界条件的仿真研究[J]. 系统仿真学报, 2022, 34(4): 901-909.
[15]	叶飞, 李梓晴, 赖李媛君. 分布式车间生产维修联合调度仿真优化方法[J]. 系统仿真学报, 2022, 34(4): 688-699.

基于电流源的超高频感应加热电路仿真分析

Simulation and Analysis of Ultra High Frequency Induction Heating Circuit Based on Current Source

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价