Journal of System Simulation ›› 2023, Vol. 35 ›› Issue (11): 2321-2332.doi: 10.16182/j.issn1004731x.joss.23-FZ0805
• Papers • Previous Articles Next Articles
Zhang Tianrui(), Liu Yuting(
), Wang Yike
Received:
2023-07-02
Revised:
2023-08-29
Online:
2023-11-25
Published:
2023-11-24
Contact:
Liu Yuting
E-mail:trzhang@syu.edu.cn;lyt01232021@163.com
CLC Number:
Zhang Tianrui, Liu Yuting, Wang Yike. Research on Multi-process Product Quality Prediction Based on Improved BiLSTM[J]. Journal of System Simulation, 2023, 35(11): 2321-2332.
1 | 杨岚, 石宇强. 基于大数据的多工序产品质量预测[J]. 西南科技大学学报, 2020, 35(1): 81-89. |
Yang Lan, Shi Yuqiang. Multi-Process Product Quality Prediction Based on Big Data[J]. Journal of Southwest University of Science and Technology, 2020, 35(1): 81-89. | |
2 | 张曼. 面向小批量试制的关键工序质量控制技术研究[D]. 杭州: 杭州电子科技大学, 2013. |
Zhang Man. Research on Quality Control Technology of Key Procedure for Small Batch Trial Process[D]. Hangzhou: Hangzhou Dianzi University, 2013. | |
3 | Zhou Shangming. Combining Dynamic Neural Networks and Image Sequences in a Dynamic Model for Complex In-dustrial Production Processes[J]. Expert Systems with Appli-cations, 1999, 16(1): 13-19. |
4 | Li Jianming, Freiheit T, Jack Hu S, et al. A Quality Prediction Framework for Multistage Machining Processes Driven by an Engineering Model and Variation Propagation Model[J]. Journal of Manufacturing Science and Engineering, 2007, 129(6): 1088-1100. |
5 | Du Shichang, Xu Rui, Huang Delin, et al. Markov Mod-eling and Analysis of Multi-Stage Manufacturing Systems with Remote Quality Information Feedback[J]. Computers & Industrial Engineering, 2015, 88: 13-25. |
6 | Colledani M, Tolio T. Joint Design of Quality and Production Control in Manufacturing Systems[J]. CIRP Journal of Manufacturing Science and Technology, 2011, 4(3): 281-289. |
7 | 卢敏童. 基于SVM的制造过程多元质量诊断与控制图模式识别研究[D]. 合肥: 合肥工业大学, 2019. |
Lu Mintong. Research on Multivariate Quality Diagnosis and Pattern Recognition of Control Chart Based on SVM for Man-ufacturing Process[D]. Hefei: Hefei University of Technology, 2019. | |
8 | 刘立堃. 多工序制造过程误差综合预测模型研究[D]. 重庆: 重庆大学, 2010. |
Liu Likun. Study on Error Synthesis Prediction Model in Multistage Manufacturing Process[D]. Chongqing: Chongqing University, 2010. | |
9 | 吕旭泽. 基于PSo-Ls-SVM的发动机多工序装配质量预测模型研究[D]. 合肥: 合肥工业大学, 2016. |
Xuze Lü. Research on the Engine Crankshaft Multistep Assembly Quality Prediction Model Based on LS-SVM of Particle Swarm Optimization[D]. Hefei: Hefei University of Technology, 2016. | |
10 | 冯尔磊. 基于SMT大数据的产品质量预测方法研究与实现[D]. 西安: 西安电子科技大学, 2018. |
Feng Erlei. Research on Analysis Method of SMT Product Quality Prediction Based on Big Data[D]. Xi'an: Xidian University, 2018. | |
11 | 李先飞, 高琦, 高菲. 基于IGBCA与SVM的质量预测[J]. 制造技术与机床, 2019(12): 128-132. |
Li Xianfei, Gao Qi, Gao Fei. Quality Prediction Model Based on IGBCA and SVM[J]. Manufacturing Technology & Machine Tool, 2019(12): 128-132. | |
12 | 杨岚. 基于大数据的多工序制造过程产品质量控制研究[D]. 绵阳: 西南科技大学, 2020. |
Yang Lan. Research on Product Quality Control of Multistage Manufacturing Process Based on Big Data[D]. Mianyang: Southwest University of Science and Technology, 2020. | |
13 | 李亚平, 陶良彦. 基于改进型GERT网络的多工序制造过程质量损失预测研究[J]. 工业工程与管理, 2021, 26(5): 150-160. |
Li Yaping, Tao Liangyan. Prediction on Quality Loss for a Multi-Stage Manufacturing Process Based on an Improved GERT Network[J]. Industrial Engineering and Management, 2021, 26(5): 150-160. | |
14 | 李敏波, 董伟伟. 面向不平衡数据集的汽车零部件质量预测[J]. 中国机械工程, 2022, 33(1): 88-96. |
Li Minbo, Dong Weiwei. Quality Prediction of Automotive Parts for Imbalanced Datasets[J]. China Mechanical Engi-neering, 2022, 33(1): 88-96. | |
15 | 杨俊峰. 基于改进灰色幂理论的过程质量控制研究[D]. 兰州: 兰州理工大学, 2019. |
Yang Junfeng. Research on Process Quality Control Based on Improved Grey Power Theory[D]. Lanzhou: Lanzhou University of Technology, 2019. | |
16 | 江平宇, 王岩, 王焕发, 等. 基于赋值型误差传递网络的多工序加工质量预测[J]. 机械工程学报, 2013, 49(6): 160-170. |
Jiang Pingyu, Wang Yan, Wang Huanfa, et al. Quality Prediction of Multistage Machining Processes Based on Assigned Error Propagation Network[J]. Journal of Mechanical Engineering, 2013, 49(6): 160-170. | |
17 | Schölkopf Bernhard, Smola A, Müller Klaus-Robert. Nonlinear Component Analysis as a Kernel Eigenvalue Problem[J]. Neural Computation, 1998, 10(5): 1299-1319. |
18 | Xue Jiankai, Shen Bo. A Novel Swarm Intelligence Opti-mization Approach: Sparrow Search Algorithm[J]. Systems Science & Control Engineering, 2020, 8(1): 22-34. |
[1] | Chen Xue, Hu Rong, Wang Hui, Li Zuocheng, Qian Bin, Li Yixu. Learning-based Ant Colony Optimization Algorithm for Solving a Kind of Complex 2-Echelon Vehicle Routing Problem [J]. Journal of System Simulation, 2023, 35(11): 2476-2495. |
[2] | Zhang Yingyu, Wu Liyun, Jia Shengtai. Multi-depot Half-open Vehicle Routing Problem with Simultaneous Delivery-pickup and Time Windows [J]. Journal of System Simulation, 2023, 35(11): 2464-2475. |
[3] | Dong Zhiming, Si Bingshan, Li Liang. Requirements of Parallel Combat System Based on GQFD-Coupling Coordination Degree [J]. Journal of System Simulation, 2023, 35(11): 2454-2463. |
[4] | Zhang Wenfeng, Zhu Zhichao, Wu Dinghui. Rolling Bearing Fault Diagnosis Based on Weighted Domain Adaptive Convolutional Neural Network [J]. Journal of System Simulation, 2023, 35(11): 2445-2453. |
[5] | Jia Zhengxuan, Lin Tingyu, Xiao Yingying, Shi Guoqiang, Wang Hao, Zeng Bi, Ou Yiming, Zhao Pengpeng. Imitative Generation of Optimal Guidance Law Based on Reinforcement Learning [J]. Journal of System Simulation, 2023, 35(11): 2410-2418. |
[6] | Wang Can, Ji Haoran, Guo Qisheng, Dong Zhiming, Tan Yaxin, Mu Ge. Development of Combat Concept of Intelligent Land Assault System Based on DoDAF [J]. Journal of System Simulation, 2023, 35(11): 2397-2409. |
[7] | Zou Quan, Hua Yixin, Shao Zhu, Zhao Wenbi. Analysis of Autonomous Aerial Refueling Capability Requirements and Key Evaluation Indicators [J]. Journal of System Simulation, 2023, 35(11): 2385-2396. |
[8] | Mao Ziquan, Gao Jialong, Gong Jianxing, Liu Quan. Application of Virtual-Real Simulation in Military Field [J]. Journal of System Simulation, 2023, 35(11): 2289-2311. |
[9] | Li Dongsheng, Liu Ye, Song Yankan, Shen Chen. Electromagnetic Transient Equivalent Modeling Method for Wind Power Clusters Adapted to Expected Faults [J]. Journal of System Simulation, 2023, 35(10): 2101-2112. |
[10] | Chen Shanshan, Wang Hongzhi, Xia Tian. Key Technology and Application of Digital Twin Modeling for MRI [J]. Journal of System Simulation, 2023, 35(10): 2122-2132. |
[11] | Liu Lu, Li Wenxin, Song Xiao, Sun Bingli, Gong Guanghong. A Fuzzy Group Decision-making-based Method for Green Supplier Selection and Order Allocation [J]. Journal of System Simulation, 2023, 35(10): 2133-2149. |
[12] | Wu Peng, Yang Zongmo, Jing Qianfeng, Li Yulin. A Hybrid Empirical Method for Fast Modeling of Ship Manoeuvring Motion [J]. Journal of System Simulation, 2023, 35(10): 2150-2160. |
[13] | Zou Mengfan, He Xiaoyu. Modeling and Analysis on Scattering Characteristics Automatic Driving Radar Bands in Rainy Environment [J]. Journal of System Simulation, 2023, 35(10): 2161-2169. |
[14] | Zhang Tianrui, Niu Huiyuan, Xie Wei. Integrated Scheduling Simulation Based on Improved Moth Flame Optimizer [J]. Journal of System Simulation, 2023, 35(10): 2170-2181. |
[15] | Wen Rui. A Structured Conceptual Model of Joint Operations From Design Perspective [J]. Journal of System Simulation, 2023, 35(10): 2202-2211. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||