Journal of System Simulation ›› 2024, Vol. 36 ›› Issue (6): 1414-1424.doi: 10.16182/j.issn1004731x.joss.23-0518

• Papers • Previous Articles     Next Articles

Simulation of Robotic Peg-in-hole Assembly Strategy Based on DRL

Zhu Zilu1(), Liu Yongkui1(), Zhang Lin2, Wang Lihui3, Lin Tingyu4   

  1. 1.School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China
    2.School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China
    3.Department of Production Engineering KTH Royal Institute of Technology, Stockholm 25175, Sweden
    4.Beijing Complex Product Advanced Manufacturing Engineering Research Center, Beijing Simulation Center, Beijing 100854, China
  • Received:2023-05-05 Revised:2023-06-23 Online:2024-06-28 Published:2024-06-19
  • Contact: Liu Yongkui E-mail:zilu_zhu@163.com;yongkuiliu@163.com

Abstract:

Aiming at the existing peg-in-hole assembly method problems of dependence on accurate contact state models, difficulties in data acquisition, low sampling efficiency, and poor security, a simulation research method for robot peg-in-hole assembly strategy based on DRL is proposed. A simulation environment of robot peg-in-hole assembly based on ROS-Gazebo is built, and a method of gravity compensation for force/torque sensor based on a least square method is proposed. The reinforcement learning paradigm is employed to model the robot peg-in-hole assembly, and a method based on soft actor-critic(SAC) algorithm is proposed. The communication mechanism between the simulation environment and the deep reinforcement learning algorithm is established through ROS. Simulation experiments show that the proposed SAC algorithm enables robots to accomplish the peg-in-hole assembly task autonomously and compliantly with good generalization ability.

Key words: peg-in-hole assembly, DRL, compliance control, assembly strategy simulation, ROS-Gazebo simulation environment

CLC Number: