Journal of System Simulation ›› 2016, Vol. 28 ›› Issue (4): 815-825.
Previous Articles Next Articles
Yu Caixu, Cai Chunbin, Huang Cui, Liu Erliang
Received:
2014-11-30
Revised:
2015-07-04
Online:
2016-04-08
Published:
2020-07-02
CLC Number:
Yu Caixu, Cai Chunbin, Huang Cui, Liu Erliang. Recent Advances in Finite Element Simulation of Machining Processes[J]. Journal of System Simulation, 2016, 28(4): 815-825.
[1] Van Luttervelt C A, Childs T, Jawahir I S, et al. The State-of-the-Art of Modelling in Machining Processes[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 1998, 47(2): 587-626. [2] P J Arrazola, T Özel, D Umbrello, et al.Recent advances in modelling of metal machining processes[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2013, 62(2): 695-718. [3] 岳彩旭. 硬态切削过程的有限元仿真与实验研究 [D].哈尔滨: 哈尔滨理工大学, 2010. [4] Oxley PLB.Introducing Strain-Rate Dependent Work Material Properties into the Analysis of Orthogonal Cutting[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 1964, 13: 127-138. [5] Oxley PLB.The Mechanics of Machining: An Analytical Approach to Assessing Machinability[M]. Chichester, England: Ellis Horwood Limited, 1989. [6] Johnson G R, Cook W H.A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures[C]// Proceedings of the 7th Int. Symposium on Ballistics, The Hague, The Netherlands, 1983: 541-547. [7] Calamaz M, Coupard D, Girot F.A New Material Model for 2D Numerical Simulation of Serrated Chip Formation When Machining Titanium Alloy Ti-6Al-4V[J]. International Journal of Machine Tools & Manufacture (S0890-6955), 2008, 48(3): 275-288. [8] Calamaz M, Limido J, Nouari M, et al.Toward A Better Understanding of Tool Wear Effect Through A Comparison Between Experiments and SPH Numerical Modelling of Machining Hard Materials[J]. International Journal of Refractory Metals & Hard Materials (S0263-4368), 2009, 27(3): 595-604. [9] Calamaz M, Coupard D, Girot F.Numerical Simulation of Titanium Alloy Dry Machining with a Strain Softening Constitutive Law[J]. Machining Science and Technology (S1091-0344), 2010, 14(2): 244-257. [10] Guo Y B, Liu C R.Mechanical properties of hardened AISI 52100 steel in hard machining[J]. ASME Journal of Manufacturing Science and Engineering (S1087-1357), 2002, 124(1): 1-9. [11] Guo Y B.An Integral Method to Determine the Mechanical Behavior of Materials in Metal Cutting[J]. Journal of Materials Processing Technology (S0924-0136), 2003, 142(1): 72-81. [12] Guo Y B, Wen Q, Woodbury K A.Dynamic Material Behavior Modeling Using Internal State Variable Plasticity and its Application in Hard Machining Simulations[J]. ASME Journal of Manufacturing Science and Engineering (S1087-1357), 2006, 128(3): 749-759. [13] Karpat Y.Temperature Dependent Flow Softening of Titanium Alloy Ti6Al4V: An Investigation Using Finite Element Simulation of Machining[J]. Journal of Materials Processing Technology (S0924-0136), 2011, 211(4): 737-749. [14] Burns T J, Mates S P, Rhorer R L, et al. Recent Results from the NIST Pulse-Heated Kolsky Bar [C]// Proceedings of the2007 Society for Experimental Mechanics. [15] Chandrasekaran H, M’Saoubi R, Chazal H. Modelling of Material Flow Stress in Chip Formation Process from Orthogonal Milling and Split Hopkinson Bar Tests[J]. Machining Science and Technology (S1091-0344), 2005, 9(1): 131-145. [16] Shi B, Attia H, Tounsi N.Identification of Material Constitutive Laws for Machining. Part I: An Analytical Model Describing the Stress, Strain, Strain Rate, and Temperature Fields in the Primary Shear Zone in Orthogonal Metal Cutting[J]. ASME Journal of Manufacturing Science and Engineering (S1087-1357), 2010, 132(5): 051008-051018. [17] Shi B, Attia H, Tounsi N.Identification of Material Constitutive Laws for Machining. Part II: Generation of the Constitutive Data and Validation of the Constitutive Law[J]. ASME Journal of Manufacturing Science Engineering (S1087-1357), 2010, 132(5): 051009-051017. [18] Shatla M, Kerk C, Altan T.Process Modeling in Machining. Part I: Determination of Flow Stress Data[J]. International Journal of Machine Tools & Manufacture (S0890-6955), 2001, 41(10): 1511-1534. [19] Oxley PLB.The Mechanics of Machining: An Analytical Approach to Assessing Machinability[M]. Chichester, England: Ellis Horwood Limited, 1989. [20] Özel T, Zeren E.A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining[J]. ASME Journal of Manufacturing Science & Engineering (S1087-1357), 2006, 128(1): 119-129. [21] Shrot A, Bäker M.Determination of Johnson-Cook Parameters from Machining Simulations[J]. Computational Materials Science (S0927-0256), 2012, 52(1): 298-304. [22] Leopold J, Wohlgemuth R.Modeling and Simulation of Burr Formation: State-of-the-Art and Future Trends[C]// Conference on Burrs, Analysis, Control and Removal, 2009. [23] Rizzuti S.Fundamental Aspects in Metal Cutting Modelling [D]. Calabria, Italy: University of Calabria, 2009. [24] 赵玢, 施志辉. 切屑生成、卷曲、折断过程的实时仿真研究[J]. 组合机床与自动化加工技术, 2000, 8: 14-17. [25] 盆洪民. 淬硬钢高速切削过程的有限元仿真 [D]. 哈尔滨: 哈尔滨理工大学, 2007. [26] Davies M A, Burns T J.Thermo-Mechanical Oscillations in Material Flow During High-Speed Machining[C]// Proceedings of the Royal Society. 2001, 359: 821-846. [27] Molinari A, Musquar C, Sutter G.Adiabatic Shear Banding in High Speed machining of Ti-6Al-4V: Experiments and Modelling[J]. International Journal of Plasticity (S0749-6419), 2002, 18(4): 443-459. [28] Pawade R S, Sonawane H A, Joshi S S.An Analytical Model to Predict Specific Shear Energy in High-Speed Turning of Inconel 718[J]. International Journal of Machine Tools and Manufacture (S0890-6955), 2009, 49(12-13): 979-990. [29] Guo Y B, Dornfeld D A.Finite Element Modeling of Burr Formation Process in Drilling 304 Stainless Steel[J]. ASME Journal of Manufacturing Science and Engineering (S1087-1357), 2000, 122(4): 612-619. [30] Guo Y B, Liu C R.3D FEA Modeling of Hard Turning[J]. ASME Journal of Manufacturing Science and Engineering (S1087-1357), 2002, 124(2): 189-199. [31] Fischer C E.Some Discussions of the Virtual Testing of Cutting Tools[C]// Proceedings of the 2008 International Manufacturing Science & Engineering Conference (ASME-MSEC2008), October 7-10, Evanston, Illinois, USA. 2008: 1-8. [32] Calamaz M, Coupard D, Girot F.A New Material Model for 2D Numerical Simulation of Serrated Chip Formation When Machining Titanium Alloy Ti-6Al-4V[J]. International Journal of Machine Tools & Manufacture (S0890-6955), 2008, 48(3-4): 275-288. [33] Calamaz M, Limido J, Nouari M, et al.Toward A Better Understanding of Tool Wear Effect Through A Comparison Between Experiments and SPH Numerical Modelling of Machining Hard Materials[J]. International Journal of Refractory Metals & Hard Materials (S0263-4368), 2009, 27(3): 595-604. [34] Oxley P L B. Mechanics of Machining[M]. Chicester, England: Ellis Horwood, 1989. [35] Tugrul Ozel, Taylan Altan.Process simulation using finite element method — prediction of cutting forces, tool stresses and temperatures in high speed flat end milling[J]. International Journal of Machine Tools & Manufacture (S0890-6955), 2000, 40(5): 713-738. [36] L Filice, D Umbrello, F Micari, et al.On the Finite Element Simulation of Thermal Phenomena in Machining Processes[M]. 2007: 263-278. [37] Guo Y B, Liu C R.Mechanical properties of hardened AISI 52100 steel in hard machining process[J]. J Manuf Sci Eng (S1087-1357), 2002, 124(1): 1-9. [38] 岳彩旭, 刘献礼, 严复钢, 等. 不同刃口形式下锯齿形切屑形成过程的仿真及实验研究[J]. 机械科学与技术, 2011, 30(4): 673-678. [39] E G Ng, D K Aspinwall, D Brazil, et al.Modelling of Temperature and Forces When Orthogonally Machining Hardened Steel[J]. International Journal of Machine Tools & Manufacture (S0890-6955), 1999, 39(6): 885-903. [40] Xie L J, Schmidt J, Schmidt C, et al.2D FEM Estimate of Tool Wear in Turning Operation[J]. Wear (S0043-1648), 2005, 258(10): 1479-1490. [41] Attanasio A, Ceretti E, Rizzuti S, et al.3D Finite Element Analysis of Tool Wear in Machining[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2008, 57(1): 61-64. [42] Attanasio A, Umbrello D.Abrasive and Diffusive Tool Wear FEM Simulation[J]. International Journal of Material Forming (S1960-6206), 2009, 2(1): 543-546. [43] Özel T, Sima M, Srivastava A K, et al.Investigations on the Effects of Multi-Layered Coated Inserts in Machining Ti-6Al-4V Alloy with Experiments and Finite Element Simulations[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2010, 59(1): 77-82. [44] Attanasio A, Ceretti E, Fiorentino A, et al.Investigation and FEM-Based Simulation of Tool Wear in Turning Operations with Uncoated Carbide Tools[J]. Wear (S0043-1648), 2010, 269(5/6): 344-350. [45] Jawahir I S, Brinksmeier E, M’Saoubi R, et al. Surface Integrity in Material Removal Processes: Recent Advances[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2011, 60(2): 603-626. [46] Barash M M, Schoech W J.A Semi-analytical Model of the Residual Stress Zone in Orthogonal Machining [C]// Proceedings of 11th International MTDR Conference. London, UK: Pergamon Press, 1970. [47] Wu D W, Matsumoto Y.The Effect of Hardness on Residual Stresses in Orthogonal Machining of AISI 4340 Steel[J]. Journal of Engineering for Industry -Transactions of the ASME (S0022-0817), 1990, 112(3): 245-252. [48] Liang S Y, Su J C.Residual Stress Modeling in Orthogonal Machining[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2007, 56(1): 65-68. [49] Liang S Y, Hanna C R, Chao R M.Achieving Machining Residual Stresses Through Model-Driven Planning of Process Parameters[J]. Transactions of NAMRI/SME (S1047-3025), 2008, 36: 445-452. [50] Ulutan D, Erdem Alaca B, Lazoglu I.Analytical Modeling of Residual Stresses in Machining[J]. Journal of Materials Processing Technology (S0924-0136), 2007, 183(1): 77-87. [51] Lazoglu I, Ulutan D, Alaca B E, et al.An Enhanced Analytical Model for Residual Stress Prediction in Machining[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2008, 57(1): 81-84. [52] Chen L, El-Wardany T I, Harris W C. Modelling the Effects of Flank Wear Land and Chip Formation on Residual Stresses[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2004, 53(1): 95-98. [53] Valiorgue F, Rech J, Hamdi H, et al.3D Modelling of Residual Stresses Induced in Finish Turning of an AISI 304L Stainless Steel[J]. International Journal of Machine Tools & Manufacture (S0890-6955), 2012, 53(1): 77-90. [54] Mondelin A, Valiorgue F, Rech J, et al.Hybrid Model for the Prediction of Residual Stresses Induced by 15-5ph Steel Turning[J]. International Journal of Mechanical Science (S0020-7403), 2012, 58(1): 69-85. [55] H Dehmani, F Salvatore, H Hamdi.Numerical study of residual stress induced by multi-steps orthogonal cutting[C]// 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 (2013). 2013: 299-304. [56] 全燕鸣, 叶邦彦. 复合材料的切削加工表面与表面粗糙度[J]. 复合材料学报, 2001, 18(4): 128-132. [57] Arola D, Ramulu M.Orthogonal cutting of fiber-reinforced composites: a finite element analysis[J]. International Journal of Mechanical Sciences (S0020-7403), 1997, 39(5): 597-613. [58] Ramesh M V, Seetharamu K N, Ganesan N, et al.Analysis of machining of FRPs using FEM[J]. International Journal of Machine Tools and Manufacture (S0890-6955), 1998, 38(12): 1531-1549. [59] Mahdi M, Zhang L.A finite element model for the orthogonal cutting of fiber-reinforced composite materials[J]. Journal of Materials Processing Technology (S0924-0136), 2001, 113(1): 373-377. [60] Iliescu D, Gehin D, Iordanoff I, et al.A discrete element method for the simulation of CFRP cutting[J]. Composites Science and Technology (S0266-3538), 2010, 70(1): 73-80. [61] Wern C W, Ramulu M.Influence of fibre on the cutting stress state in machining idealized glass fibre composite[J]. The Journal of Strain Analysis for Engineering Design (S0309-3247), 1997, 32(1): 19-27. [62] Mkaddem A, Demirci I, El Mansori M.A micro-macro combined approach using FEM for modelling of machining of FRP composites: Cutting forces analysis[J]. Composites Science and Technology (S0266-3538), 2008, 68(15): 3123-3127. [63] 罗靓, 沈真, 杨胜春, 等. 炭纤维增强树脂基复合材料层合板低速冲击性能实验研究[J]. 复合材料学报, 2008, 25(3): 20-24. [64] 路冬, 李志凯, 融亦鸣, 等. 基于宏观各向异性碳纤维增强树脂基复合材料的切削仿真[J]. 复合材料学报, 2014, 31(03):584-590. |
[1] | Lifeng Zhang, Huiren Wang. Image Reconstruction of Electrical Capacitance Tomography Based on Convolutional Neural Network and Finite Element Simulation [J]. Journal of System Simulation, 2022, 34(4): 712-718. |
[2] | Wang Song, Zhan Renjun, Duan Xiongyi. Finite Element Method Evaluation on Chest Blunt Injury by Rubber Projectile [J]. Journal of System Simulation, 2020, 32(9): 1762-1770. |
[3] | Yue Caixu, Liu Xin, Jiang Nan, Liu Xianli, He Genghuang, Li Lingxiang. Research on Modeling Technology for Hard Cutting Process [J]. Journal of System Simulation, 2020, 32(6): 982-999. |
[4] | Wang Yan, Zhu Xinqing, Hu Jiefei, Cui Ximin. Research on Numerical Simulation of Continuous Roll Forming Process of Four-roll Plate Bending Machines [J]. Journal of System Simulation, 2018, 30(5): 1772-1780. |
[5] | Wang Jinfeng, Zhao Jiulan, Chu Kaiyu. Simulation Study on Cutting Force of SiCp /Al Composite [J]. Journal of System Simulation, 2018, 30(4): 1566-1571. |
[6] | Tong Hua, Chen Guoyin, Zhu Xiaohua. Linear Design and Simulation Analysis for Harmonic-distance Rubber Bushing of PDM [J]. Journal of System Simulation, 2018, 30(2): 647-653. |
[7] | Lu Zhengping, GuoXudong, Xu Tangcheng, Qin Ruihua. Optimum Design of Remote Delivery Capsule’s Driving Mechanism Based on Electromagnetic-Permanent Magnet [J]. Journal of System Simulation, 2018, 30(2): 747-752. |
[8] | Lü Fangcheng, Guo Yunxiang, Li Peng. Optimal Design of High Power Medium Frequency Transformer Based on Channel Lightweight Requirement [J]. Journal of System Simulation, 2017, 29(1): 154-161. |
[9] | Hu Hongwei, Wang Zexiang, Sun Guangkai, Peng Gang. Finite Element Simulation of Ultrasonic Guided Wave to Detect Through-type Defects in Pipe [J]. Journal of System Simulation, 2016, 28(11): 2777-2783. |
[10] | Liao Yusong, Han Jiang. Finite Element Simulation of Machining 7075 Aluminum Alloy Based on AdvantEdge and Corresponding Experimental Study [J]. Journal of System Simulation, 2015, 27(7): 1496-1501. |
[11] | Yan Zhen, He Qing, Wang Dongping. Simulation Research on Cantilever Piezoelectric Generator with Mass [J]. Journal of System Simulation, 2015, 27(7): 1638-1643. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||