[1] Yang T, Schinstock D E.Systematic Design of Current Control System for Permanent Magnet Synchronous Motors[J]. International Journal of Control, Automation and Systems (S1598-6446), 2013, 11(6): 1128-1137. [2] Belkacem S, Naceri F, Abdessemed R.Improvement in DTC-SVM of AC Drives Using a New Robust Adaptive Control Algorithm[J]. International Journal of Control, Automation and Systems (S1598-6446), 2011, 9(2): 267-275. [3] Boldea I, Paicu M C.“Active Flux” DTFC-SVM Sensorless Control of IPMSM[J]. IEEE Transactions on Energy Conversion (S0885-8969), 2009, 24(2): 314-322. [4] Siraki A, Pillay P.An in Situ Efficiency Estimation Technique for Induction Machines Working with Unbalanced Supplies[J]. IEEE Transactions on Energy Conversion (S0885-8969), 2012,27(1): 85-95. [5] Nahid Mobarakeh B, Meibody-Tabar F, Sargos F M.On-line Identification of PMSM Electrical Parameters Based on Decoupling Control[C]//Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE.USA: IEEE, 2001, 1: 266-273. [6] Kim H, Hartwig J, Lorenz R D.Using on-line Parameter Estimation to Improve Efficiency of IPM Machine Drives[C] //Power Electronics Specialists Conference, 2002. pesc 02. 2002 IEEE 33rd Annual. USA: IEEE, 2002, 2: 815-820. [7] Zhu Z Q, Zhu X, Sun P D, et al. Estimation of winding resistance and PM flux-linkage in brushless AC machines by reduced-order extended Kalman Filter[C] //Networking, Sensing and Control, 2007 IEEE International Conference on. USA: IEEE, 2007: 740-745. [8] Gadoue S M, Giaouris D, Finch J M.MRAS Sensorless Vector Control of an Induction Motor Using New Sliding-Mode and Fuzzy-logic Adaptation Mechanisms[J]. IEEE Transactions on Energy Conversion (S0885-8969), 2010, 25(2): 394-402. [9] Wlas M, Krzeminski Z, Toliyat H A.Neural-network-based Parameter Estimations of Induction Motors[J]. IEEE Transactions on Industrial Electronics (S0278-0046), 2008, 55(4): 783-1794. [10] Wang S. Windowed least square algorithm based PMSM parameters estimation [J]. Mathematical Problems in Engineering, Volume2013, Article ID 131268: 11. [11] Xu P, Xiao J, Yang Y, Li S.Residual based Extended Least Squares Identification Method of Permanent Magnet Synchronous Motor Dual-rate Sampling Data System[J]. Electric Machines and Control, 2014, 18(4): 45-59. [12] Xu Y, Parspour N, Vollmer U.Torque Ripple Minimization for PMSM Using online Estimation of the Stator Resistances[C] //Electrical Machines (ICEM), 2012 XXth International Conference on. USA: IEEE, 2012: 1107-1113. [13] Mariethoz S, Domahidi A, Morari M.A Model Predictive Control Scheme with Torque Ripple Mitigation for Permanent Magnet Motors[C]// Industrial Electronics, 2009. IECON'09. 35th Annual Conference of IEEE. USA: IEEE, 2009: 985-990. [14] Wang S, Shi S S, Chen C, Yang G, Qu Z J. Identification of PMSM based on EKF and Elman Neural Network [R]. Shenyang, International Con-ference on Automation and Logistics, 1459-1463, 2009. [15] Du Z L, Zhao H S, Liu X F, Wang Q, Zhang M.Study on on-line Identification Method of Equivalent Circuit Parameters of Asynchronous Motors based on dq0 Coordinate System[J]. Journal of North China Electric Power University (S1008-2603), 2013, 40(2): 30-35. [16] Ding F.Coupled-least-squares Identification for Multivariable Systems[J]. IET Control Theory and Applications (S1751-8644), 2013, 7(1): 68-79. [17] Ding F, Liu G, Liu X P.Partially Coupled Stochastic Gradient Identification Methods for Non-uniformly Sampled Systems[J]. IEEE Transactions on Automatic Control (S0018-9286), 2010, 55(8): 1976-1981. [18] Ding F, Chen T.Performance Analysis of Multi-innovation Gradient Type Identification Methods[J]. Automatica (S0005-1098), 2007, 43(1): 1-14. [19] Ding F.System Identification new Theory [M]. Beijing, China: Science Press, 2013. [20] Zhang H, Li Z X, Tong C N.Off-line Parameter Identification of Induction Motor Based on Recursive Least-squares Algorithm[J]. Proceedings of the CSEE (S1671-5799), 2011, 31(8): 79-86. [21] Wang L N, Yang Z J.PMSM Model’s Reform in SIMULINK and Application in Parameters’ Identification[J]. Electric Machines and control (S1671-5799), 2012, 16(7): 77-82. |