Simulation Analysis on Flexible Track Drilling Machine Based on ADAMS

doi:10.16182/j.issn1004731x.joss.18-0279

Abstract

Abstract: The three-dimensional model of the flexible track drilling machine is designed by the virtual prototyping technology. The model is imported into ADAMS (Automatic Dynamic Analysis of Mechanical Systems) software to carry out the kinematics and dynamic simulation analysis of its virtual prototype, and the rationality and feasibility of the system design are evaluated. Through the comparative analysis, the reasonable driving velocity and acceleration parameters of the hole making system are given. According to the analysis of the dynamic characteristics of the systems, the asymmetric driving problems in the system are found and the corresponding improvement scheme is put forward. It provides a reference to the optimization of the structure and motion scheme of the flexible track system, the improvement of the product development cycle time and the reduction of the development cost. It may build the foundation for the efficient assembly of the high-precision aircraft.

Key words: aircraft assembly, flexible track drilling machine, virtual prototype, ADAMS, simulation

CLC Number:

V262.4
TH165

Zhang Yanchao, Wang Ting, Song Danlong. Simulation Analysis on Flexible Track Drilling Machine Based on ADAMS[J]. Journal of System Simulation, 2020, 32(3): 438-445.

References

[1] 袁红璇. 飞机结构件连接孔制造技术[J]. 航空制造技术, 2007, 50(1): 96-99.
Yuan Hongxuan.Manufacturing technology of connecting hole in aircraft structures[J]. Aeronautical Manufacturing Technology, 2007, 50(1): 96-99.
[2] 王良, 郭春英. 飞机装配制孔技术发展浅析[J]. 航空制造技术, 2017, 60(23): 88-92.
Wang Liang, Guo Chunying.Drilling technology development analysis in aircraft assembly[J]. Aeronautical Manufacturing Technology, 2017, 60(23): 88-92.
[3] 王国磊, 吴丹, 陈恳. 航空制造机器人现状与发展趋势[J]. 航空制造技术, 2015, 58(10): 26-30.
Wang Guolei, Wu Dan, Chen Ken.The status and development trend of aeronautical manufacturing robots[J]. Aeronautical Manufacturing Technology, 2015, 58(10): 26-30.
[4] 王一军. 基于工业机器人的飞机壁板高速精确制孔系统研究[D]. 杭州: 浙江大学, 2012.
Wang Yijun.Study on high-speed accurate drilling system of aircraft panels[D]. Hangzhou: Zhejiang University, 2012.
[5] 沈建新, 田威. 基于工业机器人的飞机柔性装配技术[J]. 南京航空航天大学学报, 2014, 46(2): 181-189.
Shen Jianxin, Tian Wei.Aircraft flexible assembly technology based on industrial robots[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2014, 46(2): 181-189.
[6] Everhart T.Neighboring mobile robot cell with drilling and fastening[C]. SAE Technical Paper. Warrendale PA: SAE International, 2017.
[7] HansonSmith R, Merkley A. Flex track one sided one up assembly[J]. SAE International Journal of Aerospace (S1946-3855), 2014, 7(2): 328-331.
[8] Boyl-Davis T M, Buttrick J N, Gage R A, et al. Flexible track drilling machine[P].United States, US 6843328B2. Jan.18, 2005.
[9] 魏超. 柔性导轨制孔系统在现代飞机装配中的应用研究[J]. 航空制造技术, 2016, 59(22): 78-83.
Wei Chao.Research on application of flex track drilling system in modern aircraft assembly[J]. Aeronautical Manufacturing Technology, 2016, 59(22): 78-83.
[10] 张冉冉, 胡永祥, 姚振强. 大型小曲率部件自动制孔设备柔性导轨设计[J]. 组合机床与自动化加工技术, 2012, 53(3): 1-5.
Zhang Ranran, Hu Yongxiang, Yao Zhenqiang.Design optimization of the flex track for auto-drilling machine on large surface of aircraft assembly[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2012, 53(3): 1-5.
[11] 方垒. 环形轨道制孔系统动、静态特性的有限元分析[D]. 杭州: 浙江大学, 2014.
Fang Lei.Analysis of static and dynamic characters of circumferential flex track drill system[D]. Hangzhou: Zhejiang University, 2014.
[12] 林美安. 飞机机身装配工艺及仿真技术研究[D]. 南京: 南京航空航天大学, 2010.
Lin Meian.Research on the assembly process and simulation of aircraft fuselage[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010.
[13] 张耀鹏, 王党校, 王丽君, 等. 欠驱动仿人多指手的虚拟样机建模和运动仿真[J]. 系统仿真学报, 2016, 28(10): 2527-2533.
Zhang Yaopeng, Wang Dangxiao, Wang Lijun, et al.Virtual modeling and motion simulation of under-actuated humanoid multi-fingered hand[J]. Journal of System Simulation, 2016, 28(10): 2527-2533.
[14] 胡明, 邓宗全, 高海波, 等. 基于ADAMS的六轮月球车动力学建模与仿真[J]. 哈尔滨工业大学学报, 2007, 39(1): 28-31.
Hu Ming, Deng Zongquan, Gao Haibo, et al.Dynamic modeling and simulation analysis based ADMAS of the six-wheeled lunar rover[J]. Journal of Harbin Institute of Technology, 2007, 39(1): 28-31.
[15] 张燕, 张浩淼, 宣博凯, 等. 基于ADAMS的人体下肢运动分析及仿真[J]. 系统仿真学报, 2017, 29(5): 988-995.
Zhang Yan, Zhang Haomiao, Xuan Bokai, et al.Motion analysis and simulation of lower limb based on ADAMS[J]. Journal of System Simulation, 2017, 29(5): 988-995.
[16] 陶栾, 周军华, 侯宝存. 基于虚拟样机的多学科优化技术研究与应用[J]. 系统仿真学报, 2015, 27(9): 2108-2116.
Tao Luan, Zhou Junhua, Hou Baocun.Research and application of multidisciplinary optimization technology based on virtual prototyping[J]. Journal of System Simulation, 2015, 27(9): 2108-2116.
[17] 陈立平, 张云清, 任卫群, 等. 机械系统动力学分析及ADAMS应用教程[M]. 北京: 清华大学出版社, 2005.
Chen Liping, Zhang Yunqing, Ren Weiqun, et al.Mechanical system dynamics analysis and ADAMS application[M]. Beijing: Tsinghua University Press, 2005.