计入多因素作用的船舶轴承负荷研究

doi:10.16182/j.issn1004731x.joss.17-0214

系统仿真学报 ›› 2019, Vol. 31 ›› Issue (6): 1158-1164.doi: 10.16182/j.issn1004731x.joss.17-0214

计入多因素作用的船舶轴承负荷研究

张圣东¹, 杨秀英²

1. 九江学院机械与材料工程学院,江西九江 332005;
2. 九江学院图书馆,江西九江 332005

收稿日期:2017-05-15 修回日期:2017-06-14 出版日期:2019-06-08 发布日期:2019-12-12
第一作者简介:张圣东(1984-),男,山东泰安,博士,副教授,研究方向为船舶推进系统性能优化;杨秀英(1986-),女,山东泰安,硕士,助理馆员,研究方向为高等教育学。
基金资助:
国家自然科学基金(51566004, 51379168), 江西省高校人文社科项目(JY17235)

Reaction Force of Ship Bearing Including Multi Factors

Zhang Shengdong¹, Yang Xiuying²

1. School of Mechanical & Materials Engineering, Jiujiang University, Jiujiang 332005, China;
2. Library, Jiujiang University, Jiujiang 332005, China

Received:2017-05-15 Revised:2017-06-14 Online:2019-06-08 Published:2019-12-12

摘要/Abstract

摘要： 轴系运行环境和工况的多变性、复杂性致使尾轴承负荷存在不确定性。运用随机理论,建立了计入多因素作用的船舶轴承负荷不确定性计算模型,形成了多因素作用下的船舶轴承负荷不确定性计算方法,并通过算例验证了理论模型的正确性。以某大型集装箱船为例研究了船体变形、螺旋桨水动力垂向力、轴承磨损三因素作用下尾轴承负荷的变化规律,对船舶尾轴承计算方法提出了建设性的意见和建议。

关键词: 船舶尾轴承, 负荷不确定性, 表征方法, 随机理论

Abstract: Since the variety and complexity of the stern bearing's operational environment and working conditions, the stern bearing load has uncertainty characters. The mathematical model of uncertainty reaction force of bearing is established including multiple random factors by using the stochastic theory; the uncertainty calculation method is formulated; and the calculation example is put forward to verify the validity of the theoretical model. The influence law among multi factors such as hull deformation, propeller hydrodynamic vertical force and bearing wear is revealed for the uncertainty reaction force of ship stern bearing by taking a large container ship as example. The comments and suggestions for the load test and marine stern bearing research are put forward, which can provide theoretical reference for the engineering practice and the specification.

Key words: ship stern bearing, loading uncertainty, characterization method, random theory

中图分类号:

TP391.9

张圣东,杨秀英 . 计入多因素作用的船舶轴承负荷研究[J]. 系统仿真学报, 2019, 31(6): 1158-1164.

Zhang Shengdong,Yang Xiuying . Reaction Force of Ship Bearing Including Multi Factors[J]. Journal of System Simulation, 2019, 31(6): 1158-1164.

参考文献

[1] 王西丁, 钟涛, 武玉增. 船体变形对轴系校中的影响与分析[J]. 上海造船, 2005(2): 61-63.
Wang Xiding, Zhong Tao, Wu Yuzeng.The Influence of Hull Deformation on Ship Shafting Alignment[J]. Shanghai Shipbuilding, 2005(2): 61-63.
[2] 耿厚才, 郑双燕, 陈建平. 大型船舶船体变形对轴系校中的影响分析[J]. 船舶工程, 2010(5): 7-9.
Geng Houcai, Zheng Shuangyan, Chen Jianping.Influence Analysis of Large Vessel Hull Deformation on Shafting Alignment[J]. Ship Engineering, 2010(5): 7-9.
[3] Murawski L.Shaft Line Alignment Analysis Taking Ship Construction Flexibility and Deformations into Consideration[J]. Marine Stuctures (S0951-8339), 2005, 18: 62-84.
[4] 徐立华. 关于船机故障的几个问题[J]. 武汉造船, 2000(4): 19-23.
Xu Lihua, The Problem of Marine Engine Fault[J]. Ship Building of Wuhan, 2000(4): 19-23.
[5] 董恒建, 张建军. 对轴系校中影响的船体变形研究[J]. 船舶工程, 2009(增1): 8-11.
Dong Hengjian, Zhang Jianjun.Study on the Hull Deflection for Effect of Shafting Alignment[J]. Ship Engineering, 2009(S1): 8-11.
[6] 钟涛. 舰船推进轴系校中技术研究[D]. 上海: 上海交通大学, 2009.
Zhong Tao.The Research on Alignment of Marine Propulsion Shaft System[D]. Shanghai: Shanghai Jiao Tong University, 2009.
[7] Low K H, Lim S H.Propulsion shaft alignment method and analysis for surface crafts[J]. Advances in Engineering Software (S0965-9978), 2004, 35(3): 45-58.
[8] 张圣东, 刘正林, 杨平. 基于有限元法的大型集装箱船船体变形研究[J]. 系统仿真学报, 2014, 26(11): 2581-2584.
Zhang Shengdong, Liu Zhenglin, Yang Ping.Hull Deformation of Large Container Ship Based on FEM[J]. Journal of System Simulation, 2014, 26(11): 2581-2584.
[9] Murawski L.Shaft Line Alignment Analysis Taking Ship Construction Flexibility and Deformations into Consideration[J]. Marine Structures (S0951-8339),, 2005(18): 62-84.
[10] 王伟吉, 吴炜, 张红岩. 计入螺旋桨水动力的轴系校中计算[J]. 船海工程, 2012, 41(2): 88-90, 94.
Wang Weiji, Wu Wei, Zhang Hongyan.Calculation of Marine Shaft Alignment with Propeller Hydrodynamic Force[J]. Ship & Ocean Engineering, 2012, 41(2): 88-90, 94.
[11] Yang Yong, Tang Wenyong, Che Chidong.Shafting Alignment Based on Improved Three-moment Method With Hydrodynamic Simulation for Twin Propulsion Systems[J]. Journal of Ship Mechanics (S1007-7294), 2013, 17(9): 1038-1052.
[12] 解学参, 姜治芳, 邱辽原. 非均匀粘性流场螺旋桨非定常水动力性能研究[J]. 船舶工程, 2015, 37(6): 37-40.
Xie Xuecan, Jiang Zhifang, Qiu Liaoyuan.Study on Propeller Unsteady Performance in Viscous Non- uniform Wake[J]. Ship Engineering, 2015, 37(6): 37-40.
[13] 陈战. 水润滑轴承的摩擦磨损性能及润滑机理的研究[D]. 重庆: 重庆大学, 2003.
Chen Zhan.Study on Friction and Wear Property and Lubricant Mechanism of Water Lubricated Bearing[D]. Chongqing: Chongqing University, 2003.
[14] 董丛林, 袁成清, 刘正林. 水润滑艉轴承磨损可靠性寿命评估模型研究[J]. 润滑与密封, 2010, 35(12): 40-43.
Dong Conglin, Yuan Chengqing, Liu Zhenglin.Study on Evaluation Model of Wear Reliability Life of Water Lubricated Stern Tube Bearing[J]. Lubrication Engineering, 2010, 35(12): 40-43.
[15] 张晓东, 蔡耀全. 某船轴系校中状态及艉轴轴承磨损的影响分析[J]. 船海工程, 2014, 43(6): 98-102.
Zhang Xiaodong, Cai Yaoquan.Analysis of Marine Shafting Alignment State and Its Influence on the Wear Condition of Stern Bearings[J]. Ship & Ocean Engineering, 2014, 43(6): 98-102.

计入多因素作用的船舶轴承负荷研究

Reaction Force of Ship Bearing Including Multi Factors

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	黄涛, 张智, 丁玉杰, 陈艳波, 王晶, 张文倩. 考虑动态频率安全与N-k故障的鲁棒应急调度方法[J]. 系统仿真学报, 2025, 37(12): 2981-2993.
[2]	张润昭, 陈艳波, 黄涛, 田昊欣, 强涂奔, 张智. 基于异构负荷特征解析预测的虚拟电厂调度方法[J]. 系统仿真学报, 2025, 37(12): 2994-3006.
[3]	于祥星, 赵艳东, 张宝琳. 基于电涡流NES的海上风机塔架振动控制[J]. 系统仿真学报, 2025, 37(12): 3007-3017.
[4]	李斌, 王于绰. 基于多策略融合的光伏系统故障诊断方法[J]. 系统仿真学报, 2025, 37(12): 3018-3032.
[5]	李孝斌, 胡冰, 尹超, 李波, 马军. 基于时空图卷积的汽车配件供应链需求预测与仿真分析[J]. 系统仿真学报, 2025, 37(12): 3060-3074.
[6]	彭艺, 雷云揆, 杨青青, 李辉, 王健明. 改进PID搜索算法的山地环境无人机路径规划[J]. 系统仿真学报, 2025, 37(12): 3075-3086.
[7]	陈逸, 邱思航, 朱正秋, 季雅泰, 赵勇, 鞠儒生. 基于启发式的人-大模型协作寻源方法[J]. 系统仿真学报, 2025, 37(12): 3112-3127.
[8]	索婧怡, 卢柏宏, 屈澈. 影视LED光源光强分布测定及其在游戏引擎中的仿真研究[J]. 系统仿真学报, 2025, 37(12): 3140-3151.
[9]	龚建兴, 胡海, 任海慧, 吴瑞祥. 面向虚实结合的军事训练系统互操作模型与运用[J]. 系统仿真学报, 2025, 37(12): 3161-3175.
[10]	徐智霞, 王蕊, 孙楠, 何兵, 沈晓卫, 朱晓菲. 基于改进遗传算法的协同干扰资源分配问题研究[J]. 系统仿真学报, 2025, 37(12): 3176-3189.
[11]	刘翔, 金乾坤. 基于PAC-Bayes的多目标强化学习A2C算法研究[J]. 系统仿真学报, 2025, 37(12): 3212-3223.
[12]	杨兰英, 李超, 邹海锋, 万江涛, 张仁强, 刘惠, 卢宏. 基于改进蚁群算法与A*算法相融合的机器人路径规划优化[J]. 系统仿真学报, 2025, 37(11): 2956-2965.
[13]	苏筱婷, 张小威, 田义, 李奇, 王帅豪. 星光导航动态仿真场景时序设计方法研究[J]. 系统仿真学报, 2025, 37(11): 2946-2955.
[14]	张志利, 刘瑾, 周召发, 梁哲, 张云昊. 基于ISCSO-BP神经网络模型的光纤陀螺温度补偿技术研究[J]. 系统仿真学报, 2025, 37(11): 2904-2917.
[15]	陈际同, 周佳加, 吴迪, 江海龙. 基于TD3-RRT的特殊环境下USV路径规划算法研究[J]. 系统仿真学报, 2025, 37(11): 2888-2903.