Simulation-based Acquisition Platform for Complex Equipment

doi:10.16182/j.issn1004731x.joss.201812023

Journal of System Simulation ›› 2018, Vol. 30 ›› Issue (12): 4677-4686.doi: 10.16182/j.issn1004731x.joss.201812023

Previous Articles Next Articles

Simulation-based Acquisition Platform for Complex Equipment

Qu Huiyang^1,2,3, Zhu Yaoqin⁴, Pu Ruiying², Zhou Junhua^1,2,3, Shi Guoqiang^1,2,3

1. State Key Laboratory of Intelligent Manufacturing System Technology, Beijing Institute of Electronic System Engineering, Beijing 100854, China;
2. Beijing Complex Product Advanced Manufacturing Engineering Research Center, Beijing Simulation Center, Beijing 100854, China;
3. Science and Technology on Space System Simulation Laboratory, Beijing Simulation Center, Beijing 100854, China;
4. Nanjing University of Science and Technology, Nanjing 210094, China

Received:2018-05-29 Revised:2018-07-03 Online:2018-12-10 Published:2019-01-03

Abstract

Abstract: Based on the architecture of the simulation-based acquisition platform and the integrated modeling technology, the modeling and simulation technology based on virtual prototype is described. The modeling and simulation techniques for reliability, maintainability and supportability, and for the acquisition project management across the life-cycle are elaborated. Based on an aerospace complex equipment acquisition project, the application of the simulation-based acquisition platform in the aerospace equipment demonstration, development and support phase is introduced.

Key words: simulation-based acquisition, master model, virtual prototype, life-cycle

CLC Number:

N945.13

Qu Huiyang, Zhu Yaoqin, Pu Ruiying, Zhou Junhua, Shi Guoqiang. Simulation-based Acquisition Platform for Complex Equipment[J]. Journal of System Simulation, 2018, 30(12): 4677-4686.

References

[1] 于向军, 王伟海. 武器系统费用分析的发展现状及对策建议[J]. 军事经济研究, 2012, 1: 50-52.
Yu Xiangjun, Wang Weihai.Development Status and Countermeasures of Weapon System Expense Analysis[J]. Military Economic Research, 2012, 1: 50-52.
[2] 任振源, 倪华勇. 美军装备采办改革及对我军的启示[J]. 国防技术基础, 2010, 2: 55-57.
Ren Zhenyuan, Ni Huayong.U.S. Military Equipment Acquisition Reform and Its Enlightenment to Our Armed Forces[J]. Technology Foundation of National Defence, 2010, 2: 55-57.
[3] 周德勇, 张代平, 李宇华. 美军推行渐进式采办经验分析[J]. 装备指挥技术学院学报, 2008, 19(4): 25-29.
Zhou Deyong, Zhang Daiping, Li Yuhua.Research on the Experience in Implementing of Evolutionary Acquisition Strategy in DoD[J]. Journal of the Academy of Equipment Command & Technology, 2008, 19(4): 25-29.
[4] 李妮, 龚光红, 彭晓源, 等. 面向服务的基于仿真的采办支撑环境体系结构研究[J]. 计算机集成制造系统, 2008, 14(12): 2401-2407.
Li Ni, Gong Guanghong, Peng Xiaoyuan, et al.Simulation-based Acquisition Supporting Environment Architecture Based on Service-oriented Architecture[J]. Computer Integrated Manufacturing Systems, 2008, 14(12): 2401-2407.
[5] 陈学勤. 基于Web服务的虚拟采办若干关键技术研究[D]. 南京: 南京理工大学, 2009.
Chen Xueqin.Research on Several Key Technologies of Web Services Based SBA System[D]. Nanjing: Nanjing University of Science and Technology, 2009.
[6] 李瑾, 宋建社, 王正元, 等. 备件消耗预测仿真方法研究[J]. 计算机仿真, 2006, 23(12): 306-309.
Li Jin, Song Jianshe, Wang Zhengyuan, et al.Simulation of Spare Wastage Forecast[J]. Computer Simulation. 2006, 23(12): 306-309.
[7] 刘喜春. 不确定需求下航空备件多阶段供应保障规划模型及动态协调机制研究[D]. 长沙: 国防科技技术大学, 2009.
Liu Xichun.Study on Planning Models and Dynamic Coordination Mechainsms for Multi-stage Spare Parts Support under Demand Uncertainties[D]. Changsha: National Unversity of Defense Technology, 2009.
[8] 王东南. 面向任务的维修保障能力评估建模与仿真技术研究[D]. 长沙: 国防科技技术大学, 2005.
Wang Dongnan.Modeling and Simulation of Task-Oriented Evaluation of Maintenance Support Capability [D]. Changsha: National Unversity of Defense Technology, 2005.
[9] 宋明, 刘丽. SBA中生命周期费用预测算法库的研究[J]. 系统仿真学报. 2009, 21(2): 23-30.
Song Ming, Liu Li.Research on Algorithm Library of Prediction in Life Cycle Cost[J]. Journal of System Simulation, 2009, 21(2): 23-30.

Simulation-based Acquisition Platform for Complex Equipment

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 5

Recommended Articles

Metrics

Comments

[1]	Zhang Yanchao, Wang Ting, Song Danlong. Simulation Analysis on Flexible Track Drilling Machine Based on ADAMS [J]. Journal of System Simulation, 2020, 32(3): 438-445.
[2]	Wang Yu, Yao Shouwen, Liu Jilin, Huang Dezhi, Zhang Qinghua, Yi Ran. Fast Implementation of Virtual Prototyping Modeling Based on Assembly Model [J]. Journal of System Simulation, 2016, 28(9): 1937-1944.
[3]	Liu Zhenze, Wang Fengming, Zhang Xuange, Yin Cangqiong. Co-simulation of Intelligent Lower Limb Assist Device Virtual Prototype [J]. Journal of System Simulation, 2015, 27(6): 1247-1254.
[4]	Cai Pu, Lin Muyi, Zheng Xin, Wen Jian. Co-simulation and Experiment of Vehicle Electro-Hydraulic Dynamic Braking System [J]. Journal of System Simulation, 2015, 27(4): 893-899.
[5]	Hu Huibin, Chen Shuxiao, Li Linlin, Liu Liqiao, Cao Lijun. Simulation and Evaluation on Handling Stability of Wheeled Self-propelled Gun Based on Virtual Prototype [J]. Journal of System Simulation, 2015, 27(11): 2735-2740.