Construction Method of Digital Twin System for High-low Temperature Test Chamber

doi:10.16182/j.issn1004731x.joss.24-0178

Abstract

Abstract:

In view of the construction requirements of the digital twin system of the high-low temperature test chamber, the EMQX server with MQTT as the communication protocol is used for data transmission. Driven by real-time data, real-time dynamic interactive mapping between the physical entity and the virtual model is realized. The neural network model and genetic algorithm are used to evaluate and predict the running state of the equipment and provide the system adjustment strategy, so as to realize the whole climate, life and working condition of the staff to understand the running state of the equipment, and effectively ensure the safe and reliable operation of the high-low temperature test chamber.

Key words: digital twin, high-low temperature test chamber, active mapping, virtual-real interaction, comprehensive monitoring

CLC Number:

TP391.1

Chen Qinghua, Liang Zuoyou, Guan Weijuan, Ji Jiadong, Liu Ping. Construction Method of Digital Twin System for High-low Temperature Test Chamber[J]. Journal of System Simulation, 2025, 37(6): 1400-1411.

Figures/Tables 19

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Table 1

Analysis of temperature distribution state

分布状态	判别条件
稳态温度分布 (同时满足)	$Δ T j ≤ ± 0.5 ℃$ $Δ T m a x ≤ 2 ℃$ $Δ T m i n ≥ - 2 ℃$
过渡态温度分布	$T ¯ < T S ± 2 ℃$
局部热点	$Δ T m a x > 2 ℃$
局部冷点	$Δ T m i n < - 2 ℃$
温度突变	稳态温度分布阶段： $Δ T j > ± 0.5 ℃$

Table 1

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Table 2

Fig. 11

Table 3

Fig. 12

Fig. 13

Fig. 14

Fig. 15

Fig. 16

References 20

1	金志军, 耿荣勤, 刘红彦, 等. JJF1101-2019«环境试验设备温度、湿度参数校准规范»解读[J]. 中国计量, 2020(9): 125-128.
2	赵永胜, 李瑞祥, 牛娜娜, 等. 数字孪生驱动的机身形状控制方法[J]. 浙江大学学报(工学版), 2022, 56(7): 1457-1463.
	Zhao Yongsheng, Li Ruixiang, Niu Nana, et al. Shape Control Method of Fuselage Driven by Digital Twin[J]. Journal of Zhejiang University(Engineering Science), 2022, 56(7): 1457-1463.
3	Anderl Reiner, Haag Sebastian, Schützer Klaus, et al. Digital Twin Technology—An Approach for Industrie 4.0 Vertical and Horizontal Lifecycle Integration[J]. Information Technology, 2018, 60(3): 125-132.
4	Grieves M, Vickers J. Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems[M]//Franz-Josef Kahlen, Flumerfelt S, Anabela Alves. Transdisciplinary Perspectives on Complex Systems: New Findings and Approaches. Cham: Springer International Publishing, 2017: 85-113.
5	陶飞, 刘蔚然, 张萌, 等. 数字孪生五维模型及十大领域应用[J]. 计算机集成制造系统, 2019, 25(1): 1-18.
	Tao Fei, Liu Weiran, Zhang Meng, et al. Five-dimension Digital Twin Model and Its Ten Applications[J]. Computer Integrated Manufacturing Systems, 2019, 25(1): 1-18.
6	Qi Qinglin, Tao Fei, Hu Tianliang, et al. Enabling Technologies and Tools for Digital Twin[J]. Journal of Manufacturing Systems, 2021, 58, Part B: 3-21.
7	陶飞, 马昕, 胡天亮, 等. 数字孪生标准体系[J]. 计算机集成制造系统, 2019, 25(10): 2405-2418.
	Tao Fei, Ma Xin, Hu Tianliang, et al. Research on Digital Twin Standard System[J]. Computer Integrated Manufacturing Systems, 2019, 25(10): 2405-2418.
8	刘蔚然, 陶飞, 程江峰, 等. 数字孪生卫星:概念、关键技术及应用[J]. 计算机集成制造系统, 2020, 26(3): 565-588.
	Liu Weiran, Tao Fei, Cheng Jiangfeng, et al. Digital Twin Satellite: Concept, Key Technologies and Applications[J]. Computer Integrated Manufacturing Systems, 2020, 26(3): 565-588.
9	张旭辉, 张超, 王妙云, 等. 数字孪生驱动的悬臂式掘进机虚拟操控技术[J]. 计算机集成制造系统, 2021, 27(6): 1617-1628.
	Zhang Xuhui, Zhang Chao, Wang Miaoyun, et al. Digital Twin-driven Virtual Control Technology of Cantilever Roadheader[J]. Computer Integrated Manufacturing Systems, 2021, 27(6): 1617-1628.
10	孙惠斌, 颜建兴, 魏小红, 等. 数字孪生驱动的航空发动机装配技术[J]. 中国机械工程, 2020, 31(7): 833-841.
	Sun Huibin, Yan Jianxing, Wei Xiaohong, et al. Digital Twin-driven Aero-engine Assembly Technology[J]. China Mechanical Engineering, 2020, 31(7): 833-841.
11	Liang Zhaoshun, Wang Shuting, Peng Yili, et al. The Process Correlation Interaction Construction of Digital Twin for Dynamic Characteristics of Machine tool Structures with Multi-dimensional Variables[J]. Journal of Manufacturing Systems, 2022, 63: 78-94.
12	陶飞, 张贺, 戚庆林, 等. 数字孪生模型构建理论及应用[J]. 计算机集成制造系统, 2021, 27(1): 1-15.
	Tao Fei, Zhang He, Qi Qinglin, et al. Theory of Digital Twin Modeling and Its Application[J]. Computer Integrated Manufacturing Systems, 2021, 27(1): 1-15.
13	吴东阳, 窦建平, 李俊. 四旋翼飞行器的数字孪生系统设计[J]. 计算机工程与应用, 2021, 57(16): 237-244.
	Wu Dongyang, Dou Jianping, Li Jun. Design of Digital Twin System for Quadrotor[J]. Computer Engineering and Applications, 2021, 57(16): 237-244.
14	中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 湿热试验箱技术条件: [S]. 北京: 中国标准出版社, 2006: 1-11.
	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Specifications for Damp Heat Chambers: [S]. Beijing: Standards Press of China, 2006: 1-11.
15	马晓茜, 管霖, 赵增立, 等. 基于多层神经网络的炉内温度场的模拟[J]. 燃烧科学与技术, 2003, 9(2): 157-160.
	Ma Xiaoqian, Guan Lin, Zhao Zengli, et al. Reconstruction of Furnace Temperature Distribution by Multi-layer Neural Networks[J]. Journal of Combustion Science and Technology, 2003, 9(2): 157-160.
16	Zhao Weiqi, Jiang Jianhua, Qin Hongchuan, et al. Machine Learning Based Soft Sensor and Long-term Calibration Scheme: A Solid Oxide Fuel Cell System Case[J]. International Journal of Hydrogen Energy, 2021, 46(33): 17322-17342.
17	武鑫, 吴万哲, 白浩, 等. 基于深度神经网络的SOFC电堆温度场建模[J]. 太阳能学报, 2023, 44(7): 55-60.
	Wu Xin, Wu Wanzhe, Bai Hao, et al. Modelling of Sofc Stack Temperature Field Based on Deep Neural Network[J]. Acta Energiae Solaris Sinica, 2023, 44(7): 55-60.
18	王道累, 李超, 李明山, 等. 基于深度卷积神经网络的光伏组件热斑检测[J]. 太阳能学报, 2022, 43(1): 412-417.
	Wang Daolei, Li Chao, Li Mingshan, et al. Solar Photovoltaic Modules Hot Spot Detection Based on Deep Convolutional Neural Networks[J]. Acta Energiae Solaris Sinica, 2022, 43(1): 412-417.
19	郁永静, 李良县, 熊万能, 等. 基于BP神经网络的测风塔布置方案研究[J]. 太阳能学报, 2021, 42(6): 364-368.
	Yu Yongjing, Li Liangxian, Xiong Wanneng, et al. Research on Layout Scheme of Met Masts Based on Neural Network Algorithms[J]. Acta Energiae Solaris Sinica, 2021, 42(6): 364-368.
20	陶飞, 程颖, 程江峰, 等. 数字孪生车间信息物理融合理论与技术[J]. 计算机集成制造系统, 2017, 23(8): 1603-1611.
	Tao Fei, Cheng Ying, Cheng Jiangfeng, et al. Theories and Technologies for Cyber-physical Fusion in Digital Twin Shop-floor[J]. Computer Integrated Manufacturing Systems, 2017, 23(8): 1603-1611.

故障类型	故障现象	故障因素
温度控制故障	设定温度无法达到或维持	温度传感器损坏或校准不准确温度控制器故障加热器或制冷系统故障
湿度控制故障	设定湿度无法达到或维持	湿度传感器损坏或校准不准确加湿器或去湿系统故障
机械故障	设备运行异常或损坏	门封条损坏或老化空气循环风扇故障物理损伤
电气故障	设备无法启动或操作异常	电源供应问题控制面板或显示屏故障安全保护装置失效
环境因素	设备性能受外部环境影响	实验室环境温度和湿度波动电源质量不佳
设备老化	设备性能逐渐下降	设备部件自然老化缺乏定期维护和更换易损件

参数名称		温度		湿度
范围		(-80~200)℃	(200~300)℃	(10~85)℃ >75% RH	(10~85)℃ ≤75%RH
偏差	温度/℃	±2	±3	±2	±2
偏差	湿度/%RH	—	—	±3	±3
均匀度	温度/℃	2	3	2	2
均匀度	湿度/%RH	—	—	5	7
波动度	温度/℃	±0.5	±1	±0.5	±1
波动度	湿度/%RH	—	—	±3	±3

[1]	Zhang Wenjia, Zhang Heming. Research on Grey-box Modeling Method of Digital Twins for Cantilever Structure [J]. Journal of System Simulation, 2025, 37(5): 1158-1168.
[2]	Zhang Huimai, Hu Xiaoya, Zhou Chunjie. Digital Twin Framework for the Generation and Optimization of Security Policies for TSN Industrial Control Systems [J]. Journal of System Simulation, 2025, 37(4): 861-874.
[3]	Jiang Lun, Wang Dajiang, Sun Wenlei, Bao Shenghui, Liu Han, Chang Saike. Research on Transformer Fault Diagnosis Method Based on Digital Twin [J]. Journal of System Simulation, 2025, 37(3): 775-790.
[4]	Hu Tianxiang, Ye Hui, Yang Xiaofei. Construction of a Digital Twin-based Ship Manufacturing Workshop Monitoring System [J]. Journal of System Simulation, 2025, 37(2): 517-528.
[5]	Zhang Xiyang, Lin Xusheng, Zhou Rui, Hu Yi. Research on the Digital Twin Architecture and Application of CNC System [J]. Journal of System Simulation, 2025, 37(1): 183-198.
[6]	Wu Qinghui, BaoYaqing , Zhao Zhongxin, Huang Xu, Wei Yuchen. Research and Implementation of Digital Twin System for Mine Drainage Monitoring [J]. Journal of System Simulation, 2025, 37(1): 199-210.
[7]	Zhao Baiting, Shi Jianguo, Jia Xiaofen. Research on Digital Twin System of Rockshaft Hoist [J]. Journal of System Simulation, 2024, 36(9): 2054-2064.
[8]	Li Dongxue, Liu Yan, Shen Boyao, Jing Yongteng, Ma Qiang, Liu Ran. Carbon Footprint Analysis and Low-carbon Optimization Method Simulation Study of Power Transformer Based on Digital Twin Technology [J]. Journal of System Simulation, 2024, 36(9): 2075-2085.
[9]	Xu Jian, Liu Gaofeng, Zhao Yijian, Zheng Zili, Yan Huanying. The Synchronous Grasping Method of Virtual-real Assembly Robot Based on Digital Twin [J]. Journal of System Simulation, 2024, 36(9): 2181-2192.
[10]	Cao Yu, Li Jie, Wang Fang, Liu Zhixiang, Wang Xueliang. Digital Twin Method of Stress Field of Deep Submersible Spherical Shell Based on Simulation Database [J]. Journal of System Simulation, 2024, 36(8): 1764-1779.
[11]	Lei Zhen, Liu Yuhua, Ding Kai, Chen Haoxiang, Li Dongwei. Digital Twin-Driven Structural Thermal Deformation Compensation System for Radio Telescopes [J]. Journal of System Simulation, 2024, 36(8): 1869-1883.
[12]	Ren Qiankun, Xiong Xinli, Liu Jingju, Yao Qian. Reserach on Digital Twins Technology in Cyberspace Security [J]. Journal of System Simulation, 2024, 36(8): 1944-1957.
[13]	Li Ying, Gao Lan, Zhu Zhisong. Digital Twin Modeling and Control of Robots for Intelligent Manufacturing Scenarios [J]. Journal of System Simulation, 2024, 36(7): 1536-1545.
[14]	Dang Hongjie, Yu Wenguang, Yang Huahui. Digital Application of Equipment System Test and Evaluation Based on Digital Twin and Parallel Experiment Theory [J]. Journal of System Simulation, 2024, 36(7): 1729-1736.
[15]	Liang Hongtao, Kong Lingchao, Liu Guozhu, Dong Wenxuan, Liu Xiangyi. ASL-CatBoost Method for Wind Turbine Fault Detection Integrated with Digital Twin [J]. Journal of System Simulation, 2024, 36(4): 873-887.