Effect of Properties of Synchronous Belt on Vibration Characteristics of a Polishing Machine

doi:10.16182/j.issn1004731x.joss.201710030

Abstract

Abstract: To form slurry film, hydrodynamic-suspension polishing machine needs polishing clearance extremely small, so any slight vibration will make tremendous influence on machining. The effect of different properties of synchronous belt on vibration characteristics of polishing machine was simulated by Workbench. Motion analysis shows the parameters which influence on transverse vibration of synchronous belt. Orthogonal test was designed and simulation was made by using above parameters. The results released that the material played an important role than the belt width and tension force. According to actual situation, optimum combination was obtained. Consequently, the stability of the machine was obviously improved. The structure optimization was realized.

Key words: synchronous belt, hydrodynamic suspension polishing, modal analysis, orthogonal test

CLC Number:

TP391.9

Sun Baibing, Piao Zhongyu. Effect of Properties of Synchronous Belt on Vibration Characteristics of a Polishing Machine[J]. Journal of System Simulation, 2017, 29(10): 2468-2474.

References

[1] 袁志权. 灌装机同步带动力特性分析及结构优化 [D]. 武汉: 武汉理工大学, 2010.
(Yuan Zhiquan.Dynamic analysis and strueture optimization on filling machine timing belt [D]. Wuhan: Wuhan University of Technology, 2010.)
[2] 卢小锐, 高文志, 张良良, 等. 基于Excite-Timing Drive 的正时同步带系统动力学分析[J]. 振动与冲击, 2013, 32(11): 66-69.
(Lu Xiaorui, Gao Wenzhi, Zhang Liangliang, et al.Dynamic analysis of a synchronous belt drive based on EXCITE-TD[J]. Journal of Vibration and Shock, 2013, 32(11): 66-69.)
[3] 杨玉萍, 钱永明, 沈世德. 同步带传动纵向振动的分析[J]. 机械传动, 2002, 26(4): 38-40.
(Yang Yuping, Qian Yongming, Shen Shide.A Study on the Axial Vibrations of Transmission Timing-belt[J]. Journal of Mechanical Transmission, 2002, 26(4): 38-40.)
[4] Abrate S.Vibrations of belts and belt drives[J]. Mechanism & Machine Theory, 1992, 27(6): 645-659.
[5] 杨玉萍, 张小美, 沈世德. 同步带传动系统横向振动的分析研究[J]. 机械设计, 2003, 20(1): 28-30.
(Yang Yuping, Zhang Xiaomei, Shen Shide.Analysis and research on the transverse vibration of synchronous belt transmission system[J]. Journal of Machine Design, 2003, 20(1): 28-30.)
[6] 凌桂龙. ANSYS Workbench 13.0从入门到精通 [M]. 北京: 清华大学出版社, 2012.
(Ling Guilong.ANSYS Workbench 13.0 from beginner to mastery [M]. Beijing: Tsinghua University Press, 2012.)
[7] Chiu J T, Lin Y Y.Modal analysis of multi-layer structure for chemical mechanical polishing process[J]. International Journal of Advanced Manufacturing Technology, 2008, 37(1-2): 83-91.
[8] 胡权威, 乔立红, 张洪伟. 薄壁结构件铣削参数有限元正交优势分析及优化[J]. 机械工程学报, 2013, 49(21): 176-184.
(Hu Quanwei, Qiao Lihong, Zhang Hongwei.Optimization of Thin-walled Part Milling Parameters Based on Finite Element and Orthogonal Dominance Analysis[J]. Journal of Mechanical Engineering, 2013, 49(21): 176-184.)
[9] 成大先. 机械设计手册(第3卷) [M]. 北京: 化学工业出版社, 2002.
(Chen Daxian.Handbook of mechanical design [M]. Beijing: Chemical Industry Press, 2002.)
[10] 张传智. 同步带用材料的现状和发展[J]. 特种橡胶制品, 1997, 18(1): 11-13.
(Zhang Chuanzhi.Present State and Development on Materials Applied to Synchronous Belt[J]. Special Purpose Rubber Products, 1997, 18(1): 11-13.)
[11] 许志杰, 吴运新. 最小二乘复频域法实复系数矩阵的分析[J]. 噪声与振动控制, 2013, 33(3): 21-25.
(Xu Zhijie, Wu Yunxin.Analysis of real and complex coefficient matries using least-square complex frequency domain method[J]. Noise and Vibration Control, 2013, 33(3): 21-25.)
[12] Peeters B, Auweraer H V D, Guillaume P, et al. The polyMAX frequency-domain method: a new standard for modal parameter estimation[J]. Shock and Vibration, 2004, 11(3-4): 395-409.
[13] 刘宁, 苏中. 圆杯型陀螺振子特性的仿真分析[J]. 系统仿真学报, 2013, 25(7): 1657-1662.
(Liu ning, Su zhong. Simulative analysis on vibrator's characteristics of cupped wave gyro[J]. Journal of System Simulation, 2013, 25(7): 1657-1662.)