Journal of System Simulation ›› 2022, Vol. 34 ›› Issue (2): 334-341.doi: 10.16182/j.issn1004731x.joss.20-0725

• VV&A Technology • Previous Articles     Next Articles

Research on Design Method for Transfer Function of DC/DC Converter System Based on Frequency Domain Method

Song Gao(), Xue Yin(), Jiantao Xu, Yuhao Miao   

  1. School of Mechanical and Electrical Engineering, Chengdu University of Technology, Chengdu 610059, China
  • Received:2020-09-21 Revised:2020-11-17 Online:2022-02-18 Published:2022-02-23
  • Contact: Xue Yin E-mail:gs@cdut.edu.cn;1298421082@qq.com

Abstract:

The small-signal model of a DC/DC converter is usually built by the analytic method, and its accuracy is verified by the frequency domain method. A new idea is developed to model the small signal of the converter, i.e., directly using the frequency domain method.The design process is as follows: The principle and modeling mechanism of the frequency domain method are analyzed, and the realization flow of Matlab modeling is introduced. A typical phase-shifted full-bridge converter is taken as the design object, and a simulation model is built by Simulink. The transfer function is obtained on the basis of the frequency domain method and state-space averaging method (analytic method) separately, and PID Tuner is employed to design the control parameters.The Bode plot and output voltage of the two methods are compared. The results show that the Bode plotmodeled by the frequency domain method is more accurate, and the dynamic performance of its output voltage is better.

Key words: small-signal modeling, frequency domain method, Matlab, phase-shifted full-bridge converter, PID Tuner

CLC Number: