Error Control on Unequal Diameter Machining of Arc Surface Cam

doi:10.16182/j.issn1004731x.joss.17-0274

Abstract

Abstract: The effective control for the machining error is an important means for obtaining high precision and high efficiency of the unequal diameter profile machining of the arc surface cam. According to the space meshing principle and the rotation transformation tensor method, the contact line between the tool and the cam is analyzed; the cutter position offset and direction in the machining process are calculated. The actual working profile of the unequal diameter machining cam equation is established. Calculation method of normal error of globoid cam profile is deduced by the principle of differential geometry. The comparison between the machining error of the unequal diameter machining and the simulation experiment is carried out. The results verify the effectiveness of the new tool position control technique in error compensation.

Key words: arc surface cam, unequal diameter machining, error compensation, normal error, error control

CLC Number:

TG54

Hu Dongfang, Guo Jianwei. Error Control on Unequal Diameter Machining of Arc Surface Cam[J]. Journal of System Simulation, 2019, 31(4): 727-732.

References

[1] 杨延峰, 张跃明, 张玲爱, 等. 弧面分度凸轮廓面的加工[J]. 现代制造工程, 2005(5): 69-72.
Yang Yanfeng, Zhang Yueming, Zhang Ling’ai, et al.Manufacturing of profile of globoidal indexing cam[J]. Modern Manufacturing Engineering, 2005(5): 69-72.
[2] 胡自化, 张平, 漆瑞. 连续分度空间弧面凸轮的多轴数控加工工艺研究[J]. 中国机械工程, 2005, 16(24): 2184-2187.
Hu Zihua, Zhang Ping, Qi Rui.A Study on Multi-axis NC Machining Processes for Continuous Indexing Globoidal Cams[J]. China Mechanical Engineering, 2005, 16(24): 2184-2187.
[3] Tsay D M, Ho H C.Consideration of Manufacturing Parameters in the Design of Grooved Glohoidal Cam Indexing Mechanisms[J]. Journal of Engineering Manufacture, 2001, 215(1): 95-103.
[4] 刘昌祺, 牧野洋, 曹西京. 凸轮机构设计[M]. 北京: 机械工业出版社, 2005: 35-50.
Liu Changqi, Mu Yeyang, Cao Xijing.Cam mechanism design[M]. Bei Jing: Machinery Industry Press, 2005: 35-50.
[5] 孔马斌, 胡自化, 李慧, 等. 基于等距曲面的弧面凸轮单侧面数控加工刀位优化算法[J]. 机械工程学报, 2008, 44(11): 277-282.
Kong Mabin, Hu Zihua, Li Hui, et al.New Cutter-location Optimization Algorithm and Error Analysis for Five-axis Flank Milling of Integral Impeller[J]. Journal of Mechanical Engineering, 2008, 44(11): 277-282.
[6] 尹明富, 赵镇宏. 弧面分度凸轮单侧面加工原理及刀位控制方法研究[J]. 中国机械工程, 2005, 16(2): 127-130.
Yin Mingfu, Zhao Zhenhong.Study on one—side machining principle and tool path control method of the globoidal cam[J].China Mechanical Engineering, 2005, 16(2): 127-130.
[7] J N Lee. Interference-free Tool Path Generation using Enveloping Element for Five-axis Machining of Spatial Cam[J]. Journal of Materials Processing Technology, 2007, 187/188: 1-10.
[8] 何有钧, 邹慧君, 郭维忠, 等. 空间凸轮刀位补偿加工方式中理论加工误差的研究[J].中国机械工程, 2001, 12(9): 997-999.
He Youjun, Zou Huijun, Guo Weizhong, et al.Study on Theoretical Manufacturing Error Caused by Off-set Compensation in NC Machining for Spatial Cam[J]. China Mechanical Engineering, 2001, 12(9): 997-999.
[9] 葛正浩, 梁辰, 别瑜, 等. 弧面分度凸轮的非等价加工研究及误差分析[J]. 机械传动, 2016, 40(5): 43-45.
Ge Zhenghao, Liang Chen, Bie Yu, et al.Study on the Non-equivalent Machining and Error Analysis of Globoidal Indexing Cam[J]. Journal of Mechanical Transmission, 2016, 40(5): 43-45.
[10] 程伟, 张跃明, 卜凡华. 弧面分度凸轮数控加工工艺研究[J]. 机械设计与制造, 2011(3): 171-173.
Cheng Wei, Zhang Yueming, Bu Fanhua.Study on the CNC processing of globoidal cam[J]. Machinery Design & Manufacture, 2011(3): 171-173.
[11] 郑武. 弧面分度凸轮的廓面误差补偿及基于SolidWorks的运动仿真[D]. 西安: 西安理工大学, 2002.
Zheng Wu.The Profile Error Compensatation of Globoidal Indexing Cam and the Movement Simulation Based on Solidworks[D]. Xi’an: Xi’an University of Technology, 2002.
[12] 黄强, 张根保, 张新玉. 滚齿直接误差模型的建立与应用[J]. 系统仿真学报, 2009, 21(17): 5588-5593.
Huang Qiang, Zhang Genbao, Zhang Xinyu.Building and Application of Direct Error Model for Gear Hobbing[J]. Journal of System Simulation, 2009, 21(17): 5588-5593.