Process Model of Complex R & D Project Based on Design Structure Matrix

Abstract

Abstract: Since complex product R&D project is characteristic with more stochastic factors, a process model was established for complex product R&D project. The model made a comprehensive description of complex information dependencies between activities, timing between the upstream and downstream, feedback iterative relationship, parallel overlapping relationship, constraints and process parameters (time parameters, cost parameters, rework probability, rework impact, learning curve, etc.) by multi-view approach. Some case studies were proposed in detail to illustrate the modeling process. This provides new ways and means of the simulation for the complex product R&D project risk analysis.

Key words: complex product, process model, design structure matrix, risk analysis

CLC Number:

Yang Baosen, Zheng Kejun, Lai Ling. Process Model of Complex R & D Project Based on Design Structure Matrix[J]. Journal of System Simulation, 2015, 27(9): 2187-2193.

References

[1] 李伯虎, 柴旭东. 复杂产品虚拟样机工程[J]. 计算机集成制造系统, 2002, 8(9): 678-683
[2] 高峰. 基于过程集成的研发项目进度风险分析方法与应用 [D]. 长沙: 国防科学技术大学, 2005.
[3] Yessine A, Falkenburg D, Chelst D.Engineering Design Management: an Information Structure Approach[J]. International Journal of Production Research (S0020-7543), 1999, 37(13): 2957-2975.
[4] Mayer R J, Crump J W.Information Integration for Concurrent Engineering (IICE) Compendium of Methods Report [R]. TX, USA: Knowledge Based Systems, Inc., 1995
[5] Mayer R J.IDEF0 Function Modeling: Are Construction of the Original Air Force report [R]. TX, USA: Knowledge Based Systems, Inc., 1990.
[6] Busby J S, Williams G M.The Value and Limitation of Using Process Modeling to Describe the Manufacturing Organization[J]. International Journal of Production Research(S0020-7543), 1993, 31(9): 2179-2194.
[7] 王计斌. 并行工程环境下产品开发过程研究 [D]. 北京: 清华大学, 1999.
[8] Jensen K.Colored Petri Net: a High level Language for System Design and Analysis[C]. New York: Advances in Petrinets, 1990, 483: 342-416
[9] Gheleb Y Abbasi, Adnan M Mukattsah.Crash PERT Networks Using Mathematical Programming[J]. International Journal of Project Management (S0263-7863), 2001, 19(2): 181-188.
[10] 赵晋敏. 并行工程环境下的产品开发过程管理研究 [D]. 武汉: 华中理工大学, 2001.
[11] Yang Baosen, Liu Lu.A Case Study of Enterprise Application Integration based on Workflow Management System[M]. Beijing, China: Springer, 2007: 425-431.
[12] 范玉顺, 罗海滨, 林慧苹, 等. 工作流管理技术基础[M]. 北京: 清华大学出版社, 2001.
[13] Suh Nam P.The Principle of Design [M]. New York, USA: Oxford U. Press, 1990.
[14] Browning T R.Applying the Design Structure Matrix to System Decomposition and Integration Problems: A Review and New Directions[J]. IEEE Transactions on Engineering Management (S0018-9391), 2001, 48(3): 292-306.
[15] 杨宝森, 刘鲁, 马晨. 基于仿真的随机活动网络进度费用联合风险[J]. 系统工程理论与实践, 2010, 30(11): 2056-2062.
[16] 杨宝森. 基于活动重叠的随机活动网络时间费用模型仿真研究[J]. 系统仿真学报. 2012, 22(4): 684-687.
[17] Cho Soo-Haeng, Eppinger S D.Product R&D Process Modeling Using Advanced Simulation[C]// Proceedings of DETC'01. ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, USA. USA: ASME, 2001.
[18] Lawler E.Combinatorial Optimization: Networks and Matroids[M]. New York, USA: Dover Publications, 1976.
[19] 杨宝森, 来玲, 刘金柱. 复杂产品研发项目过程模型研究[C]// 中国系统工程学会第十八届学术年会论文集, 北京:中国系统工程学会, 2014.
[20] 乐群星, 杨维垣, 宋晨英. 航天器研制项目基准工作分解结构的编制[J]. 项目管理技术, 2006, 4(10): 44-48.
[21] 成虎. 工程项目管理 [M]. 北京: 中国建筑工业出版社, 1997: 42-49.