Research on the Formalization Description method of Manufacturing Capability Service in Cloud Manufacturing

Journal of System Simulation ›› 2015, Vol. 27 ›› Issue (9): 2096-2107.

Previous Articles Next Articles

Research on the Formalization Description method of Manufacturing Capability Service in Cloud Manufacturing

Xiao Yingying¹, Li Bohu^1,2, Chai Xudong², Gong Jing³

1. College of Automation Science and Electrical Engineering, Beihang University, Beijing 100183, China;
2. Beijing Simulation Center, Beijing 100854, China;
3. China Electronics Standardization Institute, Beijing 100007, China

Received:2015-05-05 Revised:2015-08-03 Online:2015-09-08 Published:2020-08-07

Abstract

Abstract: According to the application demand of manufacturing capability service (MCs) in cloud manufacturing system, MCs' formalization description method was focused on. Based on the connotation analysis of MC, the definition and the classification framework of MC were given. Meanwhile, a meta-model of MCs and its attribution details, as well as a EVA (entity-value- attribute)- based persistence method was proposed to realize the formulization of heterogeneous MCs. The primary research and application in the cloud manufacturing system (TianzhiNet) show that the formalization description method of MCs is feasible. Finally, the future works are given.

Key words: cloud manufacturing, manufacturing capability, formalization description method, meta- model, entity-value-attribute (EVA) model

CLC Number:

TP391.9

Xiao Yingying, Li Bohu, Chai Xudong, Gong Jing. Research on the Formalization Description method of Manufacturing Capability Service in Cloud Manufacturing[J]. Journal of System Simulation, 2015, 27(9): 2096-2107.

References

[1] 李伯虎, 张霖, 王时龙. 云制造-面向服务的网络化制造新模式[J]. 计算机集成制造系统, 2010, 16(1): 1-7.
[2] Bo Hu Li, Xudong Chai, Lin Zhang, et al. Smart Cloud Manufacturing (Cloud Manufacturing 2.0)--A new paradigm and approach of smart manufacturing[R]. Beijing, China: Keynote speech of the 21st ISPE International Conference on Concurrent Engineering, September 8-10, 2014.
[3] 李伯虎, 张霖, 任磊, 等. 再论云制造[J]. 计算机集成制造系统, 2011, 17(3): 449-457.
[4] 张霖, 罗永亮, 陶飞, 等. 制造云构建关键技术研究[J]. 计算机集成制造系统, 2010, 16(11): 2510-2520.
[5] 张霖, 罗永亮, 范文慧, 等. 云制造及相关先进制造模式分析[J]. 计算机集成制造系统, 2011, 17(3): 458-468.
[6] 尹超, 黄必清, 刘飞, 等. 中小企业云制造服务平台共性关键技术体系[J]. 计算机集成制造系统, 2011, 17(3): 495-503.
[7] 王军强, 崔福东, 张承武, 等. 面向云制造作业车间的机器能力界定方法[J]. 计算机集成制造系统, 2014, 20(9): 2146-2163.
[8] 罗永亮, 张霖, 陶飞, 等. 云制造模式下制造能力建模关键技术研究[J]. 计算机集成制造系统, 2012, 18(7): 1357-1367.
[9] Yongliang Luo, L Zhang, F Tao, et al. Study on the description method of manufacturing capability based on description logics in cloud manufacturing[C]// The 24rd European Modeling &Simulation Symposium (EMSS2012), Vienna, Austria. NY: Curran Associates, Inc., 2012: 38-43.
[10] Yongliang Luo, L Zhang, F Tao, L Ren Y Bao. Study on the servilization of simulation capability[C]// The 23rd European Modeling &Simulation Symposium (EMSS2011), Rome, Italy. NY: Curran Associates, Inc., 2011: 105-110.
[11] Luo Y L, Zhang L, Zhang K P, et al.Research on the knowledge-based multi-dimensional information model of manufacturing capability in CMfg[C]// The 3th International Conference on Manufacturing Science and Engineering (ICMSE). Switzerland: Trans Tech Publications Ltd., 2012, 472: 2592-2595.
[12] Martínez-Costa C, Mas-Machuca M, Benedito E, et al. A review of mathematical programming models for strategic capacity planning in manufacturing[J]. International Journal of Production Economics (S0925-5273), 2014, 153(1): 66-85.

Research on the Formalization Description method of Manufacturing Capability Service in Cloud Manufacturing

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 4

Recommended Articles

Metrics

Comments

[1]	Yongkui Liu, Ming Zeng, Lin Zhang, Jinwei Guo, Siyang Yuan, Yaoyao Ping. Design and Development of a Simulation System for Scheduling in Cloud Manufacturing Based on Microservice Architecture [J]. Journal of System Simulation, 2022, 34(4): 700-711.
[2]	Feng Chenwei, Wang Yan. Parallel Tasks Optimization Scheduling in Cloud Manufacturing System [J]. Journal of System Simulation, 2019, 31(12): 2626-2635.
[3]	Yang Chen, Wang Zhongjie, Liu Zhaohui, Yu Nana. Research and Application of Cloud Manufacturing Service Platform for Crane [J]. Journal of System Simulation, 2017, 29(6): 1351-1358.
[4]	Geng Chao, Qu Shiyou, Xiao Yingying, Shi Guoqiang, Lin Tingyu, Guo Liqin, Wang Xiaowei. Cloud Manufacturing Resource Discovery Method Based on EAV Model and Solr [J]. Journal of System Simulation, 2017, 29(10): 2496-2506.