Journal of System Simulation ›› 2016, Vol. 28 ›› Issue (7): 1575-1584.

Previous Articles     Next Articles

DFIG Grid Connection Simulation Method Used for Transient Analysis of Black-start

Liu Liqing1, Mi Zengqiang1, Du Ping2, Wan Yuliang2, Yuan He1   

  1. 1. State Key Laboratory of Alternate Electrical Power System With Renewable Energy Sources, Baoding 071003, China;
    2. Power Dispatching Control Center, State Grid East Inner Mongolia Electric Power Company Limited, Hohhot 010020, China
  • Received:2015-10-10 Revised:2016-01-07 Online:2016-07-08 Published:2020-06-04

Abstract: Establishing a grid connection model of doubly-fed induction generator based wind turbine (DFIG) could be useful in the research and verification of black-start strategy in isolated power grid containing wind power. A DFIG grid connection simulation method based on Simulink was proposed. Through analyzing the operation characteristics of doubly-fed induction generator in no-load and grid-connected conditions, its dual-operation simulation model was established. According to the grid-connection theory of DFIG, the established doubly-fed induction generator model was combined with wind turbine, converter and other built-in modules, and the DFIG grid connection model was built with its control system added. Simulation results show that the simulation method is feasible.

Key words: isolated power grid black-start, electromagnetic transient, DFIG, grid connection, dual-operation simulation model

CLC Number: