Process Simulation and Optimization on Giant Block Erection of Longitudinal Staggered Arrangement

doi:10.16182/j.issn1004731x.joss.17-0070

Abstract

Abstract: The process of giant block erection of longitudinal staggered arrangement is complicated. If the design of process and tooling are not reasonable, the adjustment work in the construction site, which affects the shipbuilding cycle seriously, will be abundant. To solve these problems, the method of process simulation and optimization on giant block erection were researched. Simulation models were established for carrying out the process simulation, and the simulation process was detected in real time by establishing collision detection model and virtual human model. Based on the measured data of the ship hull, the automatic calculation method of raising height and the deviation adjustment scheme of side plates were presented to optimize the process. Prototype system was developed based on the method above, and the effectiveness of this method was proved by an example.

Key words: giant block, longitudinal staggered arrangement, process simulation, process optimization

CLC Number:

TP391.9

Zhu Wenmin, Zhu Minghua, Fan Xiumin. Process Simulation and Optimization on Giant Block Erection of Longitudinal Staggered Arrangement[J]. Journal of System Simulation, 2019, 31(1): 110-119.

References

[1] 张光发, 刘玉君, 纪卓尚. 船舶分段建造计划仿真与优化[J]. 计算机集成制造系统, 2011, 17(12): 2644-2651.
ZHANG Guangfa, LIU Yujun, JI Zhuoshang.Simulation and optimization of ship block-building planning[J]. Computer Integrated Manufacturing Systems, 2011, 17(12): 2644-2651.
[2] 丁伟康. 浅谈巨型总段造船法[J]. 船舶与海洋工程, 2009(2): 42-47.
DING Weikang.Mega block shipbuilding method[J]. Naval Architecture and Ocean Engineering, 2009(2): 42-47.
[3] 王东涛. 船舶环形总段吊带吊装设计和应用研究[J]. 船舶工程, 2015, 37(4): 65-69.
WANG Dongtao.Condole Belt Lifting Design and Application Research of Ship Ring Total Period[J]. Ship Engineering, 2015, 37(4): 65-69.
[4] Zhang B L, Boo S H, Kim J G.A new block assembly method for shipbuilding at sea[J]. Structural Engineering and Mechanics (S1225-4568), 2015, 54(5): 999-1016.
[5] 陈宇. 船体总段自动合拢小车控制模型研究[D]. 武汉: 武汉理工大学, 2009.
CHEN Yu.Research on the kinetic Model of Automatic Attitude Adjustment for Ship Block[D]. Wuhan: Wuhan University of Technology, 2009.
[6] Kim H, Lee S S, Park J H, et al.A model for a simulation-based shipbuilding system in a shipyard manufacturing process[J]. International Journal of Computer Integrated Manufacturing (S0951-192X), 2005, 18(6): 427-441.
[7] Rose C D, Coenen J M G. Automatic generation of a section building planning for constructing complex ships in European shipyards[J]. International Journal of Production Research (S0020-7543), 2016, 54(22): 6848-6859.
[8] Park K P, Ham S H, Lee C Y.Application and validation of production planning simulation in shipbuilding[J]. Ocean Engineering (S0029-8018), 2016, 114: 154-167.
[9] Lee D K, Kim Y, Hwang I H, et al.Study on a process-centric modeling methodology for virtual manufacturing of ships and offshore structures in shipyards[J]. International Journal of Advanced Manufacturing Technology (S0268-3768), 2014, 71(1): 621-633.
[10] 王津剑, 杜吉旺, 范秀敏, 等. 复杂形状船舶分段建造空间调度优化算法[J].计算机集成制造系统, 2015, 21(11): 2945-2954.
WANG Jinjian, DU Jiwang, FAN Xiumin, et al.Complex shape shipbuilding block spatial scheduling algorithm[J]. Computer Integrated Manufacturing Systems, 2015, 21(11): 2945-2954.
[11] 伍朝晖, 杨云飞, 蔡乾亚, 等. 船舶分段装焊工艺建模及狭小操作区域搜索方法[J].系统仿真学报, 2016, 28(10): 2638-2645.
WU Zhaohui, YANG Yunfei, CAI Qianya, et al.Research on Welding Process Modeling and Narrow Operating Area Searching for Shipbuilding Block[J]. Journal of System Simulation, 2016, 28(10): 2638-2645.
[12] Takechi S, Aoyama K, Nomoto T.Studies on the block positioning metrics system for the hull erection stage[J]. Journal of Marine Science and Technology (S0948-4280), 2002, 6(3): 158-167.
[13] Takechi S, Aoyama K, Nomoto T.Studies on the block positioning metrics system for the hull erection stage[J]. Journal of Marine Science and Technology (S0948-4280), 2002, 6(3): 158-167.
[14] 陈文豪. 基于测量数据的大部件对接装配仿真技术研究及其应用[D]. 杭州: 浙江大学, 2014.
CHEN Wenhao.Research on the Technology of Large Parts Assembly Simulation Based on Measurement Data and Its Application [D]. Hangzhou: Zhejiang University, 2014.
[15] 任刚. 船体分段三维测量及对位系统控制策略研究[D].大连: 大连理工大学, 2013.
REN Gang.Research on 3D Measurement and Position Control Method for Hull Block Construction[D]. Dalian: Dalian University of Technology, 2013.
[16] 江南. 纵骨的故事[J]. 现代舰船, 2012 (7): 3.
JIANG Nan.The Story of Longitudinal[J]. Modern Ships, 2012 (7): 3.
[17] 邱世广, 范秀敏, 武殿梁, 等. 虚拟操作仿真环境中基于运动捕获的虚拟人实时控制技术[J]. 计算机集成制造系统, 2013, 19(3): 523-528.
QIU Shiguang, FAN Xiumin, WU Dianliang, et al.Virtual Human Real-time Control Technology Based on Motion Capture in Virtual Simulation Environment[J]. Computer Integrated Manufacturing Systems, 2013, 19(3): 523-528.
[18] 魏大韩. 船舶巨型总段建造法关键技术研究[D]. 哈尔滨: 哈尔滨工程大学, 2012.
WEI Dahan.The Research of Key Technology on the Shipbuilding Method using Grand Block[D]. Harbin Engineering University, 2012.