微合金钢碳氮化物析出的热力学仿真

doi:10.16182/j.issn1004731x.joss.17-0147

系统仿真学报 ›› 2019, Vol. 31 ›› Issue (3): 520-527.doi: 10.16182/j.issn1004731x.joss.17-0147

微合金钢碳氮化物析出的热力学仿真

李维刚^1,2, 杨威¹, 刘超¹, 严保康¹

1. 武汉科技大学信息科学与工程学院,武汉 430081;
2. 武汉科技大学冶金自动化与检测技术教育部工程研究中心,武汉 430081

收稿日期:2017-03-28 发布日期:2019-11-20
第一作者简介:李维刚(1977-),男,湖北通城,博士,教授,研究方向为冶金过程控制与数学建模;杨威(1990-),男,湖北武汉,硕士生,研究方向为轧制过程数据分析及建模。
基金资助:
国家自然科学基金(51774219)

Thermodynamic Simulation of Carbonitride Precipitation in Micro-alloyed Steel

Li Weigang^1,2, Yang Wei¹, Liu Chao¹, Yan Baokang¹

1. School of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, China;
2. Engineering Research Center for Metallurgical Automation and Measurement Technology of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China

Received:2017-03-28 Published:2019-11-20

摘要/Abstract

摘要： 建立热连轧过程中复合微合金钢碳氮化物析出的热力学模型,考虑碳氮化物和AlN的相互作用。针对该模型求解变量多、方程非线性、初始条件难确定等问题,采用耦合问题特征的牛顿拉夫森数值求解算法,确定不同成分下的碳氮化物和AlN的析出开始温度与析出顺序,获得奥氏体相中各元素平衡成分、碳氮化物析出成分及质量分数等随轧制温度的变化规律。对某轧钢厂生产的微合金钢进行仿真分析,模型计算结果符合冶金机理,对钢材组织性能进行有效的控制具有重要的指导意义。

关键词: 热轧, 微合金钢, 碳氮化物, 析出, 热力学模型

Abstract: A mathematical model for calculating the precipitation of carbonitride in the process of hot rolling of composite micro-alloyed steel is established, and the interaction between the carbonitride and AlN is considered. In view of the difficulties of the thermodynamic model that the variables are multiple, the equations are nonlinear and the boundary conditions are determined difficultly, the Newton-Raphson numerical algorithm characterized by coupled problem is adopted. The precipitation starting temperature and precipitation sequence of carbonitride and AlN at different compositions are determined. The equilibrium composition of elements in austenite, the composition and mass fraction of carbonitride precipitates, as well as other variation laws with the rolling temperature are obtained. The simulation and analysis are carried out based on the actual production data of a steel plant. The results show that the model is basically in accordance with the relevant metallurgical mechanism, which has an important guiding significance for the effective control of the microstructure and properties of steel.

Key words: hot rolling, micro-alloyed steel, carbonitride, precipitation, thermodynamic model

中图分类号:

TP391.9

李维刚,杨威,刘超等 . 微合金钢碳氮化物析出的热力学仿真[J]. 系统仿真学报, 2019, 31(3): 520-527.

Li Weigang,Yang Wei,Liu Chao,et al . Thermodynamic Simulation of Carbonitride Precipitation in Micro-alloyed Steel[J]. Journal of System Simulation, 2019, 31(3): 520-527.

参考文献

[1] 唐广波, 吴秀月, 雍兮, 等. 复合微合金化高强度低合金钢奥氏体相中碳氮化物析出热力学数值模拟[J]. 金属热处理, 2008, 33(8): 67-72.
Tang G B, Wu X Y, Yong X, et al.Numerical simulation of thermodynamic for carbonitride precipitation in austenite of complex microalloyed high strength and low alloy steels[J]. Heat treatment of metals, 2008, 33(8): 67-72.
[2] 吴秀月. 微合金元素在热连轧过程中的溶解析出数值模拟研究[D]. 昆明: 昆明理工大学, 2009.
Wu X Y.Numerical simulation of solid solution and precipitation of micro-alloying elements during hot rolling process[D]. Kunming: Kunming University of Science and Technology, 2009.
[3] 李远远. Nb-Ti低碳微合金钢的组织及析出控制研究[D]. 沈阳: 东北大学, 2013.
Li Y Y.Research of Microstructure and precipitate control in Nb-Ti micro-alloyed low-carbon steel[D]. Shenyang: Northeastern University, 2013.
[4] 王蕾, 唐荻, 宋勇. 热轧带钢组织性能预报模型及应用[J]. 钢铁, 2016, 51(11): 73-78.
Wang L, Tang D, Song Y.Prediction model for microstructures and properties on hot strip rolling[J]. Iron and Steel, 2016, 51(11): 73-78.
[5] Wang Y L, Zhuo L C, Chen M W, et al.Thermodynamic model for precipitation of carbonitrides in microalloyed steels and its application in Ti-V-C-N system[J]. Rare Metals (S1001-0521), 2016, 35(10): 735-741.
[6] 彭宁琦, 唐广波, 刘正东, 等. 热连轧过程复合微合金碳氮化物析出的定量计算[J]. 材料热处理学报, 2011, 32(6): 155-161.
Peng N Q, Tang G B, Liu Z D, et al.Quantitative calculation on precipitation behavior of complex microalloyed carbonitride during hot rolling[J]. Transactions of Materials and Heat Treatment, 2011, 32(6): 155-161.
[7] 解家英, 张利君, 王凤琴. 高Ti-Q550钢中Nb、Ti第二相的析出行为[J]. 钢铁研究学报, 2013, 25(3): 54-58.
Xie J Y, Zhang L J, Wang F Q.Precipitation behaviour of Nb, Ti second phase in high Ti-Q550 steel[J]. Journal of Iron and Steel Research, 2013, 25(3): 54-58.
[8] Gorbachev I I, Popov V V, Pasynkov A Y.Thermodynamic modeling of carbonitride formation in steels with V and Ti[J]. The Physics of Metals and Metallography (S0031-918X), 2012, 113(10): 974-981.
[9] 许云波, 于永梅, 吴迪, 等. Nb微合金钢析出行为的热力学计算[J]. 材料研究学报, 2006, 20(1): 104-108.
Xu Y B, Yu Y M, Wu D, et al.Thermodynamic calculations of precipitation behavior in Nb microalloyed steels[J]. Chinese journal of materials research, 2006, 20(1): 104-108.
[10] Adrian H.Thermodynamic model for precipitation of carbonitrides in high strength low alloy steels containing up to three microalloying elements with or without additions of aluminium[J]. Materials Science and Technology (S0267-0836), 1992, 8(5): 406-420.
[11] 吴志桥, 高普云, 任钧国. Runge-Kutta方法求解结构动力学方程[J]. 系统仿真学报, 2010, 22(9): 2085-2090.
Wu Z Q, Gao P Y, Ren J G.Runge-Kutta methods for time integration in structural dynamics[J]. Journal of system simulation, 2010, 22(9): 2085-2090.
[12] 李维刚, 胡石雄, 刘斌, 等. 热轧含Nb微合金钢力学性能预报模型研究[J]. 冶金自动化, 2017, 41(2): 15-21.
Li W G, Hu S X, Liu B, et al.Prediction model of mechanical properties of hot-rolled high strength Nb micro-alloyed steel[J]. Metallurgical Industry Automation, 2017, 41(2): 15-21.

[1]	黄涛, 张智, 丁玉杰, 陈艳波, 王晶, 张文倩. 考虑动态频率安全与N-k故障的鲁棒应急调度方法[J]. 系统仿真学报, 2025, 37(12): 2981-2993.
[2]	张润昭, 陈艳波, 黄涛, 田昊欣, 强涂奔, 张智. 基于异构负荷特征解析预测的虚拟电厂调度方法[J]. 系统仿真学报, 2025, 37(12): 2994-3006.
[3]	于祥星, 赵艳东, 张宝琳. 基于电涡流NES的海上风机塔架振动控制[J]. 系统仿真学报, 2025, 37(12): 3007-3017.
[4]	李斌, 王于绰. 基于多策略融合的光伏系统故障诊断方法[J]. 系统仿真学报, 2025, 37(12): 3018-3032.
[5]	李孝斌, 胡冰, 尹超, 李波, 马军. 基于时空图卷积的汽车配件供应链需求预测与仿真分析[J]. 系统仿真学报, 2025, 37(12): 3060-3074.
[6]	彭艺, 雷云揆, 杨青青, 李辉, 王健明. 改进PID搜索算法的山地环境无人机路径规划[J]. 系统仿真学报, 2025, 37(12): 3075-3086.
[7]	陈逸, 邱思航, 朱正秋, 季雅泰, 赵勇, 鞠儒生. 基于启发式的人-大模型协作寻源方法[J]. 系统仿真学报, 2025, 37(12): 3112-3127.
[8]	索婧怡, 卢柏宏, 屈澈. 影视LED光源光强分布测定及其在游戏引擎中的仿真研究[J]. 系统仿真学报, 2025, 37(12): 3140-3151.
[9]	龚建兴, 胡海, 任海慧, 吴瑞祥. 面向虚实结合的军事训练系统互操作模型与运用[J]. 系统仿真学报, 2025, 37(12): 3161-3175.
[10]	徐智霞, 王蕊, 孙楠, 何兵, 沈晓卫, 朱晓菲. 基于改进遗传算法的协同干扰资源分配问题研究[J]. 系统仿真学报, 2025, 37(12): 3176-3189.
[11]	刘翔, 金乾坤. 基于PAC-Bayes的多目标强化学习A2C算法研究[J]. 系统仿真学报, 2025, 37(12): 3212-3223.
[12]	杨兰英, 李超, 邹海锋, 万江涛, 张仁强, 刘惠, 卢宏. 基于改进蚁群算法与A*算法相融合的机器人路径规划优化[J]. 系统仿真学报, 2025, 37(11): 2956-2965.
[13]	苏筱婷, 张小威, 田义, 李奇, 王帅豪. 星光导航动态仿真场景时序设计方法研究[J]. 系统仿真学报, 2025, 37(11): 2946-2955.
[14]	张志利, 刘瑾, 周召发, 梁哲, 张云昊. 基于ISCSO-BP神经网络模型的光纤陀螺温度补偿技术研究[J]. 系统仿真学报, 2025, 37(11): 2904-2917.
[15]	陈际同, 周佳加, 吴迪, 江海龙. 基于TD3-RRT的特殊环境下USV路径规划算法研究[J]. 系统仿真学报, 2025, 37(11): 2888-2903.

微合金钢碳氮化物析出的热力学仿真

Thermodynamic Simulation of Carbonitride Precipitation in Micro-alloyed Steel

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价