一种参数化的牙颌有限元自动建模方法

doi:10.16182/j.issn1004731x.joss.201712002

系统仿真学报 ›› 2017, Vol. 29 ›› Issue (12): 2945-2952.doi: 10.16182/j.issn1004731x.joss.201712002

一种参数化的牙颌有限元自动建模方法

魏毅^1,3, 朱登明²

1.武夷学院数学与计算机学院,福建武夷山354300;
2.中国科学院计算技术研究所前瞻研究实验室,北京 100190;
3.认知计算与智能信息处理福建省高校重点实验室,福建武夷山354300

收稿日期:2017-02-20 发布日期:2020-06-06
第一作者简介:魏毅(1978-),男,福建建瓯,博士,讲师,研究方向为虚拟现实;朱登明(1973-),男,安徽安庆,博士,副研究员,研究方向为自然现象模拟与可视化。
基金资助:
国家自然科学基金(61173067, 61379085),国家863计划(2015AA016401),武夷学院科技项目(YJ201607)

Parametric Approachfor Automatic Generation of Finite Element Modelfor Dental System

Wei Yi^1,3, Zhu Dengming²

1. School of Mathematics and Computer, Wuyi University, Wuyishan 354300, China;
2. Advanced Computing Research Laboratory, Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190, China;
3. Fujian Provincial Key Lab of Cognitive Computing and Intelligent Information Processing, Wuyishan 354300, China

Received:2017-02-20 Published:2020-06-06

摘要/Abstract

摘要： 针对现有牙颌有限元建模方法存在低效和缺乏个性化的缺点,提出一种参数化的牙颌有限元自动建模方法。通过实体造型技术对牙颌初始三维几何模型进行处理,生成牙周膜、牙槽的三维几何模型;根据齿列的配置参数和单元参数对牙颌模型进行网格划分;基于Ansys的参数化程序设计语言,开发了面向牙颌的有限元自动建模系统,并在真实的牙颌数据集上进行了建模实验。实验结果表明该系统能自动高效地生成个性化牙颌系统的有限元模型。

关键词: 个性化牙颌系统, 牙颌实体造型, 自动有限元建模, 牙颌功能仿真

Abstract: Aiming at overcoming the disadvantages of currentmodeling methods for dental system, such as poor efficiency and lack of personality, a method for automatic generation of finite element model for personalized dental systemis proposed. On the basis ofthe original 3Ddental model, a3Dmodel of pericementum and phatnomaiscreatedby technology of solid modeling.According tothe configuration parameters of dentition and finite elements, a finite element model of the personalized dental system is generated. Based on Ansys parametric design language, anautomatic finite element modeling system of dental system is implemented. By this modeling system, experiments are performed based on the real data of dental system and the results show that this proposed method can automatically generate the finite element model for the personalized dental systemefficiently.

Key words: personalized dental model, solid modeling for dental system, automatic finite element modeling, simulation of dental function

中图分类号:

TP391.9

魏毅,朱登明 . 一种参数化的牙颌有限元自动建模方法[J]. 系统仿真学报, 2017, 29(12): 2945-2952.

Wei Yi,Zhu Dengming . Parametric Approachfor Automatic Generation of Finite Element Modelfor Dental System[J]. Journal of System Simulation, 2017, 29(12): 2945-2952.

参考文献

[1] 孙力, 李鸿波, 储冰峰. 牙颌三维有限元建模方法的研究进展[J]. 口腔颌面修复学杂志, 2010, 11(1): 52-54. Sun Li, Li Hongbo, Chu Bingfeng. The Development of Three-dimensional Finite Element Modeling for Dental System[J]. Chinese Journal of Prosthodontics, 2010, 11(1): 52-54.
[2] Zanaty H, Beialy A, MostafaY, et al. Three-dimensional dental measurements: An alternative to plaster models[J]. American Journal of Orthodontics and Dentofacial Orthopedics (S0889-5406), 2010,137(2): 259-265.
[3] Lee J, ChoiJ. Quantitative three-dimensional analysis of root canal curvature in maxillary first molars using micro-computedtomography[J]. Journal of Endodontics (S0099-2399), 2006, 32(10): 941-945.
[4] 狄婧, 孙哲, 尹新芹, 等. 基于CBCT图像构建下颌第一前磨牙三维有限元模型术[J]. 临床口腔医学杂志, 2013, 29(9): 530-533.
Di Jing, Sun Zhe, Yin Xinqin, et al.Three-dimensional rebuilding of a mandibular first premolar based on the distal images by CBCT[J]. Journal of Clinical Stomatology, 2013, 29(9): 530-533.
[5] 闫胜昝, 章健, 苏本跃. 不规则复杂牙冠模型的建立及优化分析[J]. 图学学报, 2016, 32(2): 198-204.
Yan Shengzan,Zhang Jian,Su Benyue.Modeling and Optimization Analysis of Irregular Complex Dental Crown[J]. Journal of Graphics, 2016, 32(2): 198-204.
[6] 李九军, 陈凤山. 上颌牙列直丝弓矫治器三维有限元模型的建立[J]. 复旦学报(医学版), 2013, 40(1): 88-91. Li Jiujun, Chen Fengshan. Construction of three- dimensional finite element model of straight wire appliance[J]. Fudan University Journal of Medical Sciences (Medical sciences), 2013, 40(1): 88-91.
[7] 韦亮, 汤文成. 基于逆向工程的牙周建模及有限元计算方法[J]. 机械制造与研究, 2008, 37(3): 17-20.
Wei Liang,Tang Wencheng.Modeling and FEM Analysis of the Periodontal Ligament Based on Reverse Engineering during Orthodontics Treatment[J]. Machine Building and Automation, 2008, 37(3): 17-20.
[8] Judy Chia-Chun Yuan, Cortino Sukotjo. Occlusion for implant-supported fixed dental prostheses in partially edentulous patients: a literature review and current concepts[J]. Journal of Periodontal and Implant Science (S2093-2278), 2013, 43(2):51-57.
[9] 黄辉祥, 汤文成, 吴斌, 等. 基于超弹性模型的牙周膜生物力学响应[J]. 东南大学学报(自然科学版), 2013, 43(2): 340-344.
Huang Huixiang, Tang Wencheng, Wu Bin, et al.Biomechanical response for periodontal ligament based on hyperelastic model[J]. Journal of Southeast University (Natural Science Edition), 2013, 43(2): 340-344.
[10] 刘展, 牟雁东, 钱英莉, 等. 下颌全牙列-直丝弓矫治器的生物力学建模[J]. 医用生物力学, 2012, 27(5): 556-561.
Liu Zhan,Mu Yandong,Qian Yingli, et al.Biomechanical modeling of dentulous mandible-straight wire appliance[J]. Journal of Medical Biomechanics, 2012, 27(5): 556-561.
[11] 王钰, 李文玉, 朱明辉. 颌面部骨骼三维建模与通用仿真平台的建立[J]. 系统仿真学报, 2008, 20(16): 4227-4236.
Wang Yu, Li Wenyu,Zhu Minghui.3D-Modeling and Implementation Of All-purpose Simulations for Craniofacial Skeleton[J]. Journal of System Simulation. 2008, 20(16): 4227-4236.
[12] Mohamed I El-Anwara, Mohamed M El-Zawahry. A three dimensional finite element study on dental implant design[J]. Journal of Genetic Engineering and Biotechnology (S1687-157X), 2011, 9(1): 77-82.
[13] Keiko Nakamura, Kiyoshi Tajima.Dental application of novel finite element analysis software for three-dimensional finite element modeling of a dentulous mandible from its computed tomography images[J]. Journal of Engineering in Medicine (S2314-5129), 2013, 227(12): 1312-1318.
[14] Liao Shenghui, TongRuofeng, DongJinxiang. Anisotropic finite element modeling for patient-specific mandible[J]. Computer Methods and Programs in Biomedicine (S0169-2607), 2007, 88(3): 197-209.
[15] Olek Zienkiewicz, Robert Taylor, J. Z. Zhu. The Finite Element Method: Its Basis and Fundamentals[M]. Oxford: Butterworth-Heinemann, 2013.
[16] Pegoretti A, Fambri L, Zappini G, et al.Finite element analysis of a glass fibre reinforced composite endodontic post[J]. Biomaterials (S0142-9612), 2002, 23(13): 2667-2682.

一种参数化的牙颌有限元自动建模方法

Parametric Approachfor Automatic Generation of Finite Element Modelfor Dental System

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	黄涛, 张智, 丁玉杰, 陈艳波, 王晶, 张文倩. 考虑动态频率安全与N-k故障的鲁棒应急调度方法[J]. 系统仿真学报, 2025, 37(12): 2981-2993.
[2]	张润昭, 陈艳波, 黄涛, 田昊欣, 强涂奔, 张智. 基于异构负荷特征解析预测的虚拟电厂调度方法[J]. 系统仿真学报, 2025, 37(12): 2994-3006.
[3]	于祥星, 赵艳东, 张宝琳. 基于电涡流NES的海上风机塔架振动控制[J]. 系统仿真学报, 2025, 37(12): 3007-3017.
[4]	李斌, 王于绰. 基于多策略融合的光伏系统故障诊断方法[J]. 系统仿真学报, 2025, 37(12): 3018-3032.
[5]	李孝斌, 胡冰, 尹超, 李波, 马军. 基于时空图卷积的汽车配件供应链需求预测与仿真分析[J]. 系统仿真学报, 2025, 37(12): 3060-3074.
[6]	彭艺, 雷云揆, 杨青青, 李辉, 王健明. 改进PID搜索算法的山地环境无人机路径规划[J]. 系统仿真学报, 2025, 37(12): 3075-3086.
[7]	陈逸, 邱思航, 朱正秋, 季雅泰, 赵勇, 鞠儒生. 基于启发式的人-大模型协作寻源方法[J]. 系统仿真学报, 2025, 37(12): 3112-3127.
[8]	索婧怡, 卢柏宏, 屈澈. 影视LED光源光强分布测定及其在游戏引擎中的仿真研究[J]. 系统仿真学报, 2025, 37(12): 3140-3151.
[9]	龚建兴, 胡海, 任海慧, 吴瑞祥. 面向虚实结合的军事训练系统互操作模型与运用[J]. 系统仿真学报, 2025, 37(12): 3161-3175.
[10]	徐智霞, 王蕊, 孙楠, 何兵, 沈晓卫, 朱晓菲. 基于改进遗传算法的协同干扰资源分配问题研究[J]. 系统仿真学报, 2025, 37(12): 3176-3189.
[11]	刘翔, 金乾坤. 基于PAC-Bayes的多目标强化学习A2C算法研究[J]. 系统仿真学报, 2025, 37(12): 3212-3223.
[12]	杨兰英, 李超, 邹海锋, 万江涛, 张仁强, 刘惠, 卢宏. 基于改进蚁群算法与A*算法相融合的机器人路径规划优化[J]. 系统仿真学报, 2025, 37(11): 2956-2965.
[13]	苏筱婷, 张小威, 田义, 李奇, 王帅豪. 星光导航动态仿真场景时序设计方法研究[J]. 系统仿真学报, 2025, 37(11): 2946-2955.
[14]	张志利, 刘瑾, 周召发, 梁哲, 张云昊. 基于ISCSO-BP神经网络模型的光纤陀螺温度补偿技术研究[J]. 系统仿真学报, 2025, 37(11): 2904-2917.
[15]	陈际同, 周佳加, 吴迪, 江海龙. 基于TD3-RRT的特殊环境下USV路径规划算法研究[J]. 系统仿真学报, 2025, 37(11): 2888-2903.