基于航空子午胎刚度仿真的动态磨损监控研究

doi:10.16182/j.issn1004731x.joss.201808026

系统仿真学报 ›› 2018, Vol. 30 ›› Issue (8): 3033-3041.doi: 10.16182/j.issn1004731x.joss.201808026

基于航空子午胎刚度仿真的动态磨损监控研究

王辉, 徐坤

中国民航大学航空工程学院,天津 300300

收稿日期:2016-11-08 出版日期:2018-08-10 发布日期:2019-01-08
作者简介:王辉(1966-),男,辽宁本溪,博士,教授,研究方向为轮胎磨损监控和飞行仿真技术;徐坤(1992-),男,山东滨州,硕士,研究方向为航空轮胎磨损监控。
基金资助:
国家自然科学基金(U1233107),中国民航局科技创新项目(MHRD20140210)

Dynamic Wear Monitoring Based on Stiffness Simulation of Aircraft Radial Tire

Wang Hui, Xu Kun

College of Aeronautical Engineering, Civil Aviation University of China, Tianjin 300300, China

Received:2016-11-08 Online:2018-08-10 Published:2019-01-08

摘要/Abstract

摘要： 针对航空轮胎磨损监控中因胎顶膨胀量变化导致监控结果不准确的问题,考虑到航空轮胎胎内帘线的高强度、正交各向异性和小拉伸变形,在Abaqus软件中采用Yeoh橡胶本构模型和Rebar帘线加强筋单元建立了B737-800民航飞机主子午线轮胎的三维非线性有限元模型。应用自适应接触的拉格朗日算法,成功模拟了轮胎与机场路面之间的静态接触问题。仿真得出了径向轮胎刚度、接地印痕、主磨损区域和下沉量,得出的胎顶膨胀量变化曲线解决了磨损监控中传感器动态阈值制定的问题,提高了监控准确度。通过比较检验,验证了仿真结果的可靠性。

关键词: 航空轮胎, 磨损监控, Abaqus, 民航飞机, 非线性, 轮胎刚度

Abstract: During the wear monitoring for the aircraft tire, the expansion change on the top of tire crown caused inaccuracy for the monitoring results. Considering the aircraft tire cord with high strength, orthogonal anisotropy and tensile deformation, the main three dimensional nonlinear finite element model of B737-800 passenger aircraft radial tire was built using the Yeoh rubber constitutive model and the Rebar stiffener unit in Abaqus software. The problem of static contact between aircraft tire and road was successfully simulated using adaptive Lagrange algorithm. Radial tire stiffness, ground imprinting, main area of friction losses and sinkage were obtained by simulation. The problem of the dynamic threshold of sensors during the wear monitoring was solved by the variation curve of the top of tire crown inflation; while the accuracy for monitoring results was improved. The simulation results were compared with the calculated data and the result indicated that the model' reliability was fairly good.

Key words: aircraft tire, wear monitoring, Abaqus, passenger aircraft, nonlinear, tire stiffness

中图分类号:

TP391.9

王辉, 徐坤. 基于航空子午胎刚度仿真的动态磨损监控研究[J]. 系统仿真学报, 2018, 30(8): 3033-3041.

Wang Hui, Xu Kun. Dynamic Wear Monitoring Based on Stiffness Simulation of Aircraft Radial Tire[J]. Journal of System Simulation, 2018, 30(8): 3033-3041.

参考文献

[1] Ridha R A.Computation of Stresses,Strains, and Deformations of Tires[J]. Rubber Chemistry and Technology (S0035-9475), 1980, 53(4): 849-902.
[2] Ghoreishy M H R. Finite Element Analysis of Steady Rolling Type with Slip Angle: Effect of Belt Angle[J]. Plastics,Rubber and Composites(S1465-8011), 2006, 35(2): 83-90.
[3] Ghoreishy M H R. A Parametric Study on the Steady State Rolling Behsteel-belted Radical Type[J]. Iranian Polymer Journal(S1026-1265), 2007, 16(8): 539-548.
[4] 杨建, 王国林, 万治君. 汽车轮胎性能矛盾相容的新非自然平衡轮廓设计的研究[J]. 汽车工程, 2015, 37(12): 1418-1425.
Yang Jian, Wang Guo-lin, Wan Zhi-jun.A Study on the New Non-natural Equilibrium Contour Design of Vehicle Tires with Conflicting Performance Compatibility[J]. Automotive Engineering, 2015, 37(12): 1418-1425.
[5] 胡林, 谷正气, 黄晶. 30.00R51子午线轮胎刚度仿真[J]. 系统仿真学报, 2008, 20(8): 2210-2214.
Hu Lin, Gu Zheng-qi, Huang Jing.Simulation of 30.00R51 Radialtire’s Stiffness Characteristics[J]. Journal of System Simulation, 2008, 20(8): 2210-2214.
[6] 潘涛. 子午线轮胎轮廓设计理论的相关研究[D]. 广州: 华南理工大学, 2011: 18-45.
Pan Tao.Some Theory Study of Contour Design for Radial Tire[D]. Guangzhou: South China University of Technology, 2011: 18-45.
[7] 应卓凡, 臧孟炎, 周涛. 基于复杂花纹的子午线轮胎刚度特性仿真[J]. 汽车技术, 2009, 30(11): 35-37.
Ying Zhuo-fan, Zang Meng-yan, Zhou Tao.Characteristic Simulation of Radial Stiffness of Radial Tire based on Complex Tread[J]. Automobile Technology, 2009, 30(11): 35-37.
[8] Alkan V, Karamihas S M, Anlas G.Finite Element Modeling of Static Tire Enveloping Characteristic[J]. International Journal of Automotive Technology (S1229-9138), 2011, 12(4): 529-535.
[9] 石琴, 陈无畏, 洪洋. 基于有限元理论的轮胎刚度特性的仿真研究[J]. 系统仿真学报, 2006, 18(6): 1445-1449.
Shi Qin, Chen Wu-wei, Hong Yang.The Simulation of Tire’s Stiffness Characteristics using Finite Element Model[J]. Journal of System Simulation, 2006, 18(6): 1445-1449.
[10] V A Gorelov, A I Komissarov.Mathematical Model of the Straight-line Rolling Tire - Rigid Terrain Irregulari- ties Interaction[J]. Procedia Engineering(S1877-7058), 2016, 34(2): 145-151.
[11] Flanigan C, Beyer L, Klekamp D, et al.Comparative Study of Silica, Carbon Black and Novel Fillers in Tread Compounds[J]. Rubber World(S1671-8232), 2012, 245(5): 18-31.
[12] 许男. 复合工况下轮胎稳态模型研究[D]. 长春: 吉林大学, 2012: 19-45.
Xu Nan.Study on the Steady State Tire Model under Combined Conditions[D]. Changchun: Jilin University, 2012: 19-45.
[13] Xie M, Yao H, Zhao Z.Failure Analysis on Tread Throw of the Tire of B737-800 Airplane[J]. Engineering Failure Analysis(S1350-6307), 2011, 18(2): 789-796.
[14] 刘长国. 全钢载重子午线轮胎稳态力学特性有限元分析[D]. 吉林: 吉林大学出版社, 2006: 9-27.
Liu Chang-guo.The Finite Element Analysis of the Steady-state Mechanical Properties of Full Steel Load-bearing Radial Tire[D]. Jilin: Jilin University Press, 2006: 9-27.
[15] 丰世林, 吴江. 基于区间灰色预测模型的飞机轮胎磨损预测技术研究[J]. 数学的实践与认识, 2016, 46(4): 97-101.
Feng Shi-lin, Wu Jiang.The Research Based on the Extent Grey Prediction Model for the Airplane Tyre Abrasion Forecast[J]. Mathematics in Practice and Theory, 2016, 46(4): 97-101.
[16] Ko J Y, Prakashan K, Kim J K.New Silane Coupling Agents for Silica Tire Tread Compounds[J]. Journal of Elastomers and Plastices(S1530-8006), 2012, 44(6): 549-562.

基于航空子午胎刚度仿真的动态磨损监控研究

Dynamic Wear Monitoring Based on Stiffness Simulation of Aircraft Radial Tire

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	高宏鼐, 付丽疆, 夏倩, 郭亚. 可观测度在光合作用模型性能评估中的应用[J]. 系统仿真学报, 2022, 34(6): 1330-1342.
[2]	王志伟, 胡继宗, 王风杰, 黄杰. 基于非线性观测器的导航过程仿真研究[J]. 系统仿真学报, 2022, 34(5): 1127-1139.
[3]	黄茹楠, 丁宁. 基于改进PID神经网络算法的AUV垂直面控制[J]. 系统仿真学报, 2020, 32(2): 229-235.
[4]	米根锁, 梁骅旗. 基于干扰观测器的机械臂非线性滑模控制[J]. 系统仿真学报, 2019, 31(9): 1935-1941.
[5]	王建晖, 王清, 马克茂, 黄小芳. 非线性建筑结构振动的非光滑逆控制方法设计[J]. 系统仿真学报, 2019, 31(6): 1172-1178.
[6]	侯利民, 任一夫, 刘恒飞, 林栋. 基于无速度传感器的永磁同步电机滑模自抗扰控制[J]. 系统仿真学报, 2019, 31(5): 963-970.
[7]	李睿, 吴迎年. 电动机功耗效率反馈线性化非线性控制器设计[J]. 系统仿真学报, 2019, 31(12): 2845-2852.
[8]	刘丽兰, 任博林, 朱国栋. 一种非线性吸振器的振动特性及参数影响研究[J]. 系统仿真学报, 2019, 31(10): 2069-2077.
[9]	陈建恩, 何伟, 葛为民, 刘军, 钟锐. 并联非线性能量阱吸振效能仿真研究[J]. 系统仿真学报, 2018, 30(9): 3411-3419.
[10]	贾立山, 刘喆, 孙毅. 基于RMBP神经网络的飞机电气故障智能诊断[J]. 系统仿真学报, 2018, 30(9): 3493-3501.
[11]	孙明玮, 马顺健, 陈增强, 胡超芳. 飞行器定时航迹规划及其交互仿真平台设计[J]. 系统仿真学报, 2018, 30(8): 2966-2972.
[12]	黄天羽, 郭芸莹. 面向动作捕捉的非线性时间序列预测方法研究[J]. 系统仿真学报, 2018, 30(7): 2808-2815.
[13]	李世峰, 邱占芝, 樊丽萍, 赵丽娜. 基于改进BP网络的网络控制系统建模与仿真[J]. 系统仿真学报, 2018, 30(6): 2279-2287.
[14]	苏秀苹, 董家盈, 乔延华, 黄敏. 基于Abaqus的磁保持继电器中弹片反力特性研究[J]. 系统仿真学报, 2018, 30(4): 1528-1534.
[15]	李亚洁, 李炜. 事件触发稀疏数据传输下NNCS的满意容错控制[J]. 系统仿真学报, 2018, 30(4): 1581-1593.