闸板防喷器关井锁紧过程的闭环回馈仿真

doi:10.16182/j.issn1004731x.joss.201704026

系统仿真学报 ›› 2017, Vol. 29 ›› Issue (4): 894-901.doi: 10.16182/j.issn1004731x.joss.201704026

闸板防喷器关井锁紧过程的闭环回馈仿真

张方舟, 孙瑞雪, 张文晶, 李龙, 李强

东北石油大学计算机与信息技术学院,黑龙江大庆 163318

收稿日期:2015-06-17 修回日期:2015-09-09 出版日期:2017-04-08 发布日期:2020-06-03
作者简介:张方舟(1973-),男,河南商丘,博士,教授,研究方向为计算机网络与仿真。
基金资助:
国家自然科学基金(61402099),中国石油天然气集团公司重大专项(2013E-38-09)

Closed-Loop Feedback Simulation to Process of Ram Blowout Preventer Shut-in Locking

Zhang Fangzhou, Sun Ruixue, Zhang Wenjing, Li Long, Li Qiang

College of Computer and Information Technology, Northeast Petroleum University, Daqing 163318, China

Received:2015-06-17 Revised:2015-09-09 Online:2017-04-08 Published:2020-06-03

摘要/Abstract

摘要： 近年井控培训多以教师讲解为主,虚拟仿真使学员难以理解实际操作。钻井井控实物仿真培训系统的应用,可有效解决井控培训中场景不易复现、培训成本高等问题。针对井控实物仿真培训系统中关井时闸板防喷器锁紧操作的仿真化,在闸板防喷器中加装步进电机驱动器和步进电机,利用步进电机速度及转矩控制实现闸板防喷器锁紧装置的锁紧操作,提出基于闸板防喷器锁紧过程步进电机的闭环回馈控制系统。为验证方法可行性,利用井控设备进行仿真计算,实验结果证明其可靠性及实用性。

关键词: 闸板防喷器, 锁紧装置, 步进电机, 闭环, 仿真

Abstract: Well control training was explained mainly by teacher in recent years. Virtual simulation made it difficult for students to understand the actual operation. Application of drilling well control simulation training system solved effectively the problem of the scene seldom repetition and high cost of well control training. For the simulation of the process of ram blowout preventer shut-in locking in the well controlled physical simulation training system, the stepping motor driver and the stepping motor were installed in ram blowout preventer, and locking operation of the lock device was realized by using speed and torque of the stepping motor for the ram blowout preventer. The closed-loop feedback control system of the stepping motor based on the lock of the ram blowout preventer was proposed. To verify the feasibility of the method, the well control equipment was taken as the background of simulation calculation. Experimental results show the technique reliability and practicability.

Key words: ram blowout preventer, lock device, the stepping motor, closed-loop, simulation

中图分类号:

TP391.9

张方舟, 孙瑞雪, 张文晶, 李龙, 李强. 闸板防喷器关井锁紧过程的闭环回馈仿真[J]. 系统仿真学报, 2017, 29(4): 894-901.

Zhang Fangzhou, Sun Ruixue, Zhang Wenjing, Li Long, Li Qiang. Closed-Loop Feedback Simulation to Process of Ram Blowout Preventer Shut-in Locking[J]. Journal of System Simulation, 2017, 29(4): 894-901.

参考文献

[1] 石油天然气钻井井控编写组. 石油天然气钻井井控 [M]. 北京: 石油工业出版社, 2008.
(Compile Group of Oil and Gas Drilling Well Control. Oil and Gas Drilling Well Control [M]. Beijing, China: Petroleum Industry Press, 2008.)
[2] 田岚. 石油天然气钻井工程风险识别与评价方法[J]. 钻采工艺, 2010, 33(2): 31-33.
(Tian Lan.Risk Identification and Evaluation Method in Drilling Engineering[J]. Drilling & Production Technology, 2010, 33(2): 31-33.)
[3] 集团公司井控培训教材编写组. 井下作业技术、管理人员井控技术 [M]. 东营: 中国石油大学出版社, 2013.
(Compilation of Group Company Well Control Training Teaching Materials. Drilling Technology and Manager and Well Control Technology [M]. Dongying, China: China University of Petroleum Press, 2013.)
[4] Asgeir J Sorensen.Structural Properties in the Design and Operation of Marine Control Systems[J]. IFAC Journal on Annual Reviews in Control (S1367-5788), 2005, 29(1): 125-149.
[5] 曾康玲. 两相混合步进电机开环性能优化与闭环控制研究 [D]. 广州: 华南理工大学, 2014.
(Zeng Kangling.Research on Open-Loop Performance Optimization and Closed-Loop Control for Two-Phase Hybrid Stepper Motor [D]. Guangzhou, China: South China University of Technology, 2014.)
[6] 刘宝志. 步进电机的精确控制方法研究 [D]. 济南: 山东大学, 2010.
(Liu Baozhi.The Study of Exactly Control Stepping Motor [D]. Jinan, China: Shandong University, 2010.)
[7] 徐兆华. 高速高精度步进闭环控制系统的研究 [D]. 太原: 中北大学, 2013.
(Xu Zhaohua.Research of High Performance Closed-Loop Control System for Stepper Motor [D]. Taiyuan, China: North University of China, 2013.)
[8] 高琴, 刘淑聪, 彭宏伟. 步进电机控制系统的设计及应用[J]. 制造业自动化, 2012, 34(1): 150-152.
(Gao Qin, Liu Shucong, Peng Hongwei.Design and Application of the Stepper Motor Control System[J]. Manufacturing Automation, 2012, 34(1): 150-152.)
[9] 张前毅. 一种提高步进电动机定位精度的方法[J]. 工矿自动化, 2010, 36(4): 120-122.
(Zhang Qianyi.A Method of Improving Locating Precision of Stepping Motor[J]. Industry and Mine Automation, 2010, 36(4): 120-122.)
[10] 吕帅. 一类半严格反馈型非线性参数化系统的自适应控制方法研究 [D]. 杭州: 浙江大学, 2012.
(Lv Shuai.Study on the Adaptive Control for a Class of Semi-Strict Feedback Nonlinearly Parameterized Systems [D]. Hangzhou, China: Zhejiang University, 2012.)
[11] J H Kim, S H Lee, Hongmei Wang. Similarity Measure Application to Fault Detection of Flight System[J]. Journal of Central South University of Technology (S2095-2899), 2009, 16(5): 789-793.
[12] 孙爽. 基于模糊PID系统的自动控制器设计分析[J]. 机电信息, 2012, 26(6): 145-147.
(Sun Shuang.Design and Analysis of Automatic Controller Based on Fuzzy PID System[J]. Mechanical and Electrical Information, 2012, 26(6): 145-147.)
[13] 田海, 李军. 基于Matlab的模糊自整定PID控制器仿真研究[J]. 工业控制计算机, 2011, 24(6): 24-25.
(Tian Hai, Li Jun.Simulation Study of Fuzzy Self-Tuning PID Controller Based on Matlab[J]. Industrial Control Computer, 2011, 24(6): 24-25.)

[1]	陆淼嘉, 黄承媛, 滕靖. 基于多智能体的网购生鲜无人车配送调度仿真[J]. 系统仿真学报, 2022, 34(6): 1185-1195.
[2]	陆承, 靳学胜. 基于Steam VR的交互仿真水枪灭火训练系统设计[J]. 系统仿真学报, 2022, 34(6): 1312-1319.
[3]	倪凌佳, 黄晓霞, 李红旮, 张子博. 基于协作式深度强化学习的火灾应急疏散仿真研究[J]. 系统仿真学报, 2022, 34(6): 1353-1366.
[4]	胡冰山, 程科, 陆盛, 喻洪流. 变刚度储能助力髋外骨骼设计及助力效果仿真[J]. 系统仿真学报, 2022, 34(5): 1090-1100.
[5]	古鹏飞, 张霖, 陈真, 叶俊杰. 基于X语言的起飞场景民机协同设计与仿真一体化方法[J]. 系统仿真学报, 2022, 34(5): 929-943.
[6]	刘文正, 张和明. 面向复杂系统运动仿真的信息物理融合建模[J]. 系统仿真学报, 2022, 34(5): 954-963.
[7]	于帆, 罗东琦, 司宾强, 朱纪洪. 可交互式相控阵雷达DOA估计仿真系统设计[J]. 系统仿真学报, 2022, 34(5): 964-977.
[8]	付建林, 丁国富, 张剑, 江海凡, 郭沛佩. 基于响应面和NSGA-II的AGV系统多目标优化配置[J]. 系统仿真学报, 2022, 34(5): 994-1002.
[9]	李伟, 张欢, 马萍, 杨明. 云仿真系统可信度评估问题探讨[J]. 系统仿真学报, 2022, 34(4): 679-687.
[10]	刘永奎, 曾鸣, 张霖, 郭金维, 原思阳, 平垚垚. 基于微服务架构的云制造调度仿真系统设计与开发[J]. 系统仿真学报, 2022, 34(4): 700-711.
[11]	张立峰, 王会忍. 基于卷积神经网络及有限元仿真的电容层析成像图像重建[J]. 系统仿真学报, 2022, 34(4): 712-718.
[12]	马庆禄, 张琳, 袁新新, 刘丰杰. 城市道路交通多状态演化下的连续仿真技术研究[J]. 系统仿真学报, 2022, 34(4): 847-855.
[13]	吴枫, 刘秀罗, 王佳, 刘阳, 李苏疆, 仲妍. 航天发射可视化仿真分析技术与应用研究[J]. 系统仿真学报, 2022, 34(4): 856-869.
[14]	姚红光, 肖恢翚, 张航. 无标度物流网络中延误扩散临界条件的仿真研究[J]. 系统仿真学报, 2022, 34(4): 901-909.
[15]	叶飞, 李梓晴, 赖李媛君. 分布式车间生产维修联合调度仿真优化方法[J]. 系统仿真学报, 2022, 34(4): 688-699.

闸板防喷器关井锁紧过程的闭环回馈仿真

Closed-Loop Feedback Simulation to Process of Ram Blowout Preventer Shut-in Locking

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价