[1] |
陈龙, 张军洋, 李郝林. 面向材料反求的非均质体参数化模型构建[J]. 机械工程学报, 2014, 50(23): 156-164.
|
[2] |
H Al Akhras, T Elguedj, A Gravouil, et al.Isogeometric analysis-suitable trivariate NURBS models from standard B-Rep models[J]. Computer Methods in Applied Mechanics and Engineering (S0045-7825), 2016, 307(1): 256-274.
|
[3] |
Xu G, Bernard M, Regis D, et al.Analysis-suitable volume parameterization of multi-block computational domain in isogeometric applications[J]. Computer-Aided Design (S0010-4485), 2013, 45(2): 395-404.
|
[4] |
许华强, 徐岗, 胡维华, 等. 面向等几何分析的B样条参数体生成方法[J]. 图学学报, 2013, 34(3):43-48.
|
[5] |
H Al Akhras, T Elguedj, A Gravouilac, et al.Isogeometric analysis-suitable trivariate NURBS models from standard B-Rep models[J]. Computer Methods in Applied Mechanics and Engineering (S0045-7825), 2016, 307(1): 256-274.
|
[6] |
S Sikder, A Barari, H A Kishawy.Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping[J]. Rapid Prototyping Journal (S1355-2546), 2015, 21(6): 649-661.
|
[7] |
Su Wang, Yan Wang, Chin-Sheng Chen, et al.An adaptive slicing algorithm and data format for functionally graded material objects[J]. The International Journal of Advanced Manufacturing Technology (S0268-3768), 2013, 65(1): 251-258.
|
[8] |
Binil Starly, Alan Lau.Direct slicing of STEP based NURBS models for layered manufacturing[J]. Computer-Aided Design (S0010-4485), 2005, 37(1): 1-16.
|
[9] |
王素, 朱玉明, 朱心雄. 基于有限元法功能梯度材料零件自适应切片算法[J]. 航空学报, 2008, 29(1): 240-245
|
[10] |
肖阳, 李青云, 曾祥辉. 基于快速成型技术的非均质件制备工艺新方法[J]. 机械设计与研究. 2015, 31(4): 125-128.
|
[11] |
S H Choi, K T Kwok.A tolerant slicing algorithm for layered manufacturing[J]. Rapid Prototyping Journal (S1355-2546), 2002, 8(3): 161-179.
|
[12] |
赵保军, 汪苏, 陈五一. STL数据模型的快速切片算[J]. 北京航空航天大学学报. 2004, 30(4): 329-333.
|
[13] |
Zang Ting, Xu Anping.An approach to representing heterogeneous Non-Uniform Rational B-Spline objects[J]. Transactions of Tianjin University (S0010-4485), 2011, 17(4): 275-279.
|
[14] |
V Kumar, D Burns, D Dutta, et al.A framework for object modeling[J]. Computer Aided Design (S0010-4485), 1999, 31(5): 541-556.
|
[15] |
V Kumar, D Dutta.An approach to modeling & representation of heterogeneous objects[J]. Journal of Mechanical Design (S1050-0472), 1998, 120(12): 659-667.
|
[16] |
吴晓军, 刘伟军, 王天然, 等. 距离场定义下异质材料CAD信息建模方法[J]. 计算机辅助设计与图形学学报, 2005, 17(2): 313-318.
|
[17] |
S H Choi, K T Kwok.A tolerant slicing algorithm for layered manufacturing[J]. Rapid Prototyping Journal (S1355-2546), 2002, 8(3): 161-179.
|
[18] |
Sébastien Labbé, Jean-Pierre Gallois.Slicing communicating automata specifications: polynomial algorithms for model reduction[J]. Formal Aspects of Computing (S0934-5043), 2008, 20(6): 563-595.
|