Simulation and Evaluation of Facility Layout in Environment with Complexity for Manufacturing System

doi:10.16182/j.issn1004731x.joss.201702015

Abstract

Abstract: To research the performance for manufacturing system of equipment with different layout of facility, a method of simulation and evaluation in the environment with complexity of manufacturing system was proposed. Three kinds of typical layout of facility were concluded and abstract by the enterprise facts. The evaluation system was established in the environment with complexity of manufacturing system. The construction method of the entropy models were described emphatically. Simulation models were developed based on the production and process model. The layouts were analyzed and evaluated by the data of the evaluation system from simulation experiments.

Key words: facility layout, simulation and evaluation, complexity of manufacturing system, manufacturing of equipment

CLC Number:

TH181

Yu Ailin, Chen Qingxin, Mao Ning. Simulation and Evaluation of Facility Layout in Environment with Complexity for Manufacturing System[J]. Journal of System Simulation, 2017, 29(2): 346-354.

References

[1] 王家善. 设施规划与设计[J]. 工业工程, 1998, 1(1): 11-14.
(Wang J S.Facilities planning and design[J]. Industrial Engineering Journal, 1998, 1(1): 11-14.)
[2] 朱荣钱, 杨季英, 李继禹. 应用成组技术原理改造机群式车间平面布置一例[J]. 机械工厂设计, 1990, 10(3): 31-34.
(Zhu R Q, Yang J Y, Li J Y.A Case study of cluster layout of workshop based on group technology[J]. Design of Machinery Factory, 1990, 10(3): 31-34.)
[3] Azadivar F, Wang J.Facility layout optimization using simulation and genetic algorithms[J]. International Journal of Production Research (S0975-2366), 2000, 38(17): 4369-4383.
[4] Zhang Z F, Xiao R B.Empirical. Study on entropy models of cellular manufacturing systems[J]. Progress in Natural Science (S1745-5391), 2009, 19(3): 389-395.
[5] Wu X D, Chu C H, Yan W L, et al.A genetic algorithm for cellular manufacturing design and layout[J]. European Journal of Operational Research (S0377-2217), 2007, 181(1): 156-167.
[6] 张毕西, 周艳, 刘鑫. 离散生产系统车间设施布置优化[J]. 工业工程, 2004, 7(2): 8-11.
(Zhang B X, Zhou Y, Liu X.Optimization of facility layout of workshop for discrete production systems[J]. Industrial Engineering Journal, 2004, 7(2): 8-11.)
[7] 马玉敏. 单元化制造系统的构建及评价 [D]. 上海: 同济大学, 2002.
(Ma Y M.Construction and evaluation of cellular manufacturing system [D]. Shanghai, China: Tongji University, 2002.)
[8] 薛天然. 基于单元化制造的设备布局及仿真研究 [D]. 南京: 东南大学, 2007.
(Xue T R.Research of facilities layout and simulation based on cellular manufacturing [D]. Nanjing, China: Southeast University, 2007.)
[9] 俞爱林, 黎近秋, 毛宁, 等. 模具生产车间情景仿真[J]. 工业工程, 2012,15(3):115-121.
(Yu A L, Li J Q, Mao N.Modeling for Scenario-Simulation in a Mold Production Workshop[J]. Industrial Engineering Journal, 2012, 15(3):115-121.)
[10] Sergey D, Bushuyev, Sergey V, et al.Entropy measurement as a project control tool[J]. International Journal of Project Management (S1753-84326), 1999, 17(6): 343-350.
[11] 张志峰, 谢奉军, 肖人彬. 基于状态熵模型的单元制造系统复杂性研究[J]. 中国机械工程, 2009, 20(19): 2332-2336.
(Zhang Z F, Xie F J, Xiao R B.Study on complexity of cellular manufacturing based on state entropy models[J]. China Mechanical Engineering, 2009, 20(19): 2332-2336.)
[12] 张志峰, 肖人彬. 基于熵模型的生产物流系统运行评价[J]. 计算机集成制造系统, 2010, 16(4): 810-816.
(Zhang Z F, Xiao R B.Operation evaluation of production logistics system based on entropy model[J]. Computer Integrated Manufacturing Systems, 2010, 16(4): 810-816.)
[13] 郭栋, 王晓原, 张晓琳, 等. 基于信号配时优化的路网运行效益仿真评价[J]. 系统仿真学报, 2013, 25(6): 1405-1409, 1414.
(Guo D, Wang X Y, Zhang X L, et al.Evaluation of traffic operation benefit from signal timing optimization of dynamic traffic network[J]. Journal of System Simulation (S1004-731X), 2013, 25(6): 1405-1409, 1414.)
[14] 成卫, 张东明, 肖海承. 路网可靠性动态交通仿真及评价系统研究[J]. 系统仿真学报, 2013, 25(12): 2986-2992.
(Chen W, Zhang D M, Xiao H C.Research on dynamic traffic simulation and evaluation system of road network reliability[J]. Journal of System Simulation (S1004-731X), 2013, 25(12): 2986-2992.)
[15] 陈绍宽, 詹琳霞, 吴海俊, 等. 基于DEA/AHP的快速路出入口间距仿真评价方法研究[J]. 系统仿真学报, 2010, 22(5): 1313-1318.
(Chen S K, Zhan L X, Wu H J, et al.Evaluating intervals between on-and off-ramp through simulation based on DEA & AHP[J]. Journal of System Simulation (S1004-731X), 2010, 22(5): 1313-1318.)
[16] 谢守俊, 周春辉, 黄立文, 等. 船闸扩容仿真评价系统[J]. 系统仿真学报, 2014, 26(8): 1863-1868.
(Xie S J, Zhou C H, Huang L W, et al.Simulation and evaluation system for lock capacity expansion[J]. Journal of System Simulation (S1004-731X), 2014, 26(8): 1863-1868.)
[17] 黎文瑞, 陈庆新, 毛宁, 等. 随机生产环境下的模具制造单元资源配置[J]. 计算机集成制造系统, 2001, 13(1): 2189-2194.
(Li W R, Chen Q X, Mao N, et al.Resource allocation of mould manufacturing cell in environment of stochastic production[J]. Computer Integrated Manufacturing Systems, 2001, 13(1): 2189-2194.)
[18] 俞爱林, 陈庆新, 毛宁. 基于典型零件的模具企业中长期设备资源规划建模[J]. 模具工业, 2009, 35(8): 1-5.
(Yu A L, Chen Q X, Mao N.Modeling of long_term facility resource planning based on typical components for die and mould enterprises[J]. Die & Mould Industry, 2009, 35(8): 1-5.)