SCR脱硝系统NOx排放浓度建模与仿真

doi:10.16182/j.issn1004731x.joss.18-0047

系统仿真学报 ›› 2020, Vol. 32 ›› Issue (2): 172-181.doi: 10.16182/j.issn1004731x.joss.18-0047

SCR脱硝系统NO_x排放浓度建模与仿真

董泽, 闫来清^*

华北电力大学河北省发电过程仿真与优化控制技术创新中心,河北保定 071003

收稿日期:2018-01-24 修回日期:2018-05-16 出版日期:2020-02-18 发布日期:2020-02-19
作者简介:董泽(1970-),男,河北保定,博士,教授,研究方向为脱硝系统建模;闫来清(通讯作者1983-),男,山西太原,博士生,研究方向为脱硝系统建模。
基金资助:
河北省自然科学基金(E2018502111),中央高校基本科研基金(2018QN097)

Modelling and Simulation for NO_x Emission Concentration of SCR Denitrification System

Dong Ze, Yan Laiqing^*

Hebei Technology Innovation Center of Simulation & Optimized Control for Power Generation, North China Electric Power University, Baoding 071003, China

Received:2018-01-24 Revised:2018-05-16 Online:2020-02-18 Published:2020-02-19

摘要/Abstract

摘要： 由于选择性催化还原(Selective catalytic reduction, SCR)脱硝系统在工况变化时具有非线性、大滞后和强干扰性的特点,提出基于互信息(Mutual information, MI)和核隐变量正交投影(Kernel-based Orthogonal Projections to Latent Structures, KOPLS)对NO_x排放浓度建立模型。利用互信息估计输入变量时延,并实现样本相空间重构;利用KOPLS建模。对标准数据集仿真,KOPLS具有较强的泛化、非线性逼近和抗噪能力。现场数据分析,MI-KOPLS与KOPLS相比,在训练和测试时RMSE减小17%和22%,使预测更精确;MI-KOPLS与其它算法相比,测试时RMSE和MAPE达到最小值3.1886mg/m³和13.5917%,说明预测值最接近真实值,验证了其有效性。

关键词: 选择性催化还原, NO_x排放浓度, 互信息, 核隐变量正交投影, 建模

Abstract: The selective catalytic reduction (SCR) denitrification system has the features of non-linearity, large lag and strong disturbance, when the operating condition changes. Based on mutual information (MI) and Kernel-based Orthogonal Projections to Latent Structures (KOPLS), the model for NO_x emission concentration is proposed. The time-delay of each input variable is estimated by mutual information, and phase space construction is performed, KOPLS is utilized to modelling. KOPLS shows the merits of strong generalization, nonlinear fitting and anti-noise in the simulation of benchmark datasets. According to field data analysis, RMSE of MI-KOPLS in training and test are reduced by 17% and 22% respectively. Compared with KOPLS, MI-KOPLS predicts more accurately. Compared with other algorithms, RMSE and MAPE of MI-KOPLS reach minimum values 3.1886 mg/m³ and 13.5917% in test respectively, what indicates that the predicted value is the closest to real value, and the effectiveness of MI-KOPLS is verified.

Key words: SCR, NO_x emission concentration, mutual information, KOPLS, modelling

中图分类号:

TP391.9

董泽, 闫来清. SCR脱硝系统NO_x排放浓度建模与仿真[J]. 系统仿真学报, 2020, 32(2): 172-181.

Dong Ze, Yan Laiqing. Modelling and Simulation for NO_x Emission Concentration of SCR Denitrification System[J]. Journal of System Simulation, 2020, 32(2): 172-181.

参考文献

[1] 孙虹, 华伟, 黄治军, 等. 基于CFD建模的1000MW电站锅炉SCR脱硝系统喷氨策略优化[J]. 动力工程学报, 2016, 36(10): 810-815.
Sun Hong, Hua Wei, Huang Zhijun, et al.CFD-based Numerical Simulations on Optimization of the Ammonia Spraying Strategy in a 1000 MW SCR Denitrification System[J]. Journal of Chinese Society of Power Engineering, 2016, 36(10): 810-815.
[2] 廖永进, 范军辉, 杨维结, 等. 基于RBF神经网络的SCR脱硝系统喷氨优化[J]. 动力工程学报, 2017, 37(11): 931-937.
Liao Yongjin, Fan Junhui, Yang Weijie, et al.Ammonia Spraying Optimization of an SCR Denitrification System Based on RBF Neural Network[J]. Journal of Chinese Society of Power Engineering, 2017, 37(11): 931-937.
[3] Peng H, Gui W, Shioya H, et al.A predictive control strategy for nonlinear NO_x decomposition process in thermal power plants[J]. IEEE Transactions on Systems, Man, and Cybernetics-Part A: Systems and Humans (S2168-2216), 2006, 36(5): 904-921.
[4] 刘吉臻, 曲亚鑫, 田亮, 等. 基于偏最小二乘回归的锅炉再热汽温建模[J]. 中国电机工程学报, 2011, 31(11): 99-105.
Liu Jizhen, Qu Yaxin, Tian Liang, et al.Modelling of Utility Boiler Reheat Steam Temperature Based on Partial Least Squares Regression[J]. Proceedings of the Chinese Society for Electrical Engineering, 2011, 31(11): 99-105.
[5] 刘吉臻, 秦天牧, 杨婷婷, 等. 基于自适应多尺度核偏最小二乘的SCR烟气脱硝系统建模[J]. 中国电机工程学报, 2015, 35(23): 6083-6088.
Liu Jizhen, Qin Tianmu, Yang Tingting, et al.SCR denitrification system modeling based on self-adaptive multi-scale kernel partial least squares[J]. Proceedings of the Chinese Society for Electrical Engineering, 2015, 35(23): 6083-6088.
[6] Si F, Romero C E, Yao Z, et al.Optimization of coal-fired boiler SCRs based on modified support vector machine models and genetic algorithms[J]. Fuel (S0016-2361), 2009, 88(5): 806-816.
[7] Wu X, Shen J, Sun S Z, et al.Data-driven disturbance rejection predictive control for SCR denitrification system[J]. Industrial and Engineering Chemistry Research (S0888-5885), 2016, 55(60): 5923-5930.
[8] Kraskov A, Stögbauer H, Grassberger P.Estimating mutual information[J]. Physical Review E (S2470-0045), 2004, 69(6): 66-138.
[9] Doquire G, Verleysen M.A Performance Evaluation of Mutual Information Estimators for Multivariate Feature Selection[M]. Berlin: Springer-Verlag, 2013: 51-63.
[10] Rantalainen M, Bylesjö M, Cloarec O, et al.Kernel-based orthogonal projections to latent structures (K-OPLS)[J]. Journal of Chemometrics (S0886-9383), 2007, 21(7-9): 376-385.
[11] Yeh I C.Modeling slump flow of concrete using second-order regressions and artificial neural networks[J]. Cement & Concrete Composites (S0958-9465), 2007, 29(6): 474-480.
[12] Veaux R D D, Psichogios D C, Ungar L H. A comparison of two nonparametric estimation schemes: MARS and neural networks[J]. Computers & Chemical Engineering (S0098-1354), 1993, 17(8): 819-837.
[13] Nazari S, Shahhoseini O, Sohrabi-Kashani A, et al.Experimental determination and analysis of CO₂, SO₂, and NO_x, emission factors in Iran's thermal power plants[J]. Energy (S0360-5442), 2010, 35(7): 2992-2998.
[14] Loveday T, Wiggins M, Festa M, et al.Pattern Recognition-Applications and Methods[M]. Berlin: Springer Berlin Heidelberg, 2013: 51-63.

[1]	陆承, 靳学胜. 基于Steam VR的交互仿真水枪灭火训练系统设计[J]. 系统仿真学报, 2022, 34(6): 1312-1319.
[2]	倪娜, 何坤金, 朱新成, 陈正鸣. 一种人体肌肉的参数化建模及变形方法研究[J]. 系统仿真学报, 2022, 34(5): 1109-1117.
[3]	古鹏飞, 张霖, 陈真, 叶俊杰. 基于X语言的起飞场景民机协同设计与仿真一体化方法[J]. 系统仿真学报, 2022, 34(5): 929-943.
[4]	刘文正, 张和明. 面向复杂系统运动仿真的信息物理融合建模[J]. 系统仿真学报, 2022, 34(5): 954-963.
[5]	林清泉, 杨佳然, 张和明. 一种基于离散事件系统规范的复杂产品行为模型描述方法[J]. 系统仿真学报, 2022, 34(4): 661-669.
[6]	李伯虎, 柴旭东, 张霖, 卿杜政, 施国强, 林廷宇, 郭丽琴, 杨晨, 谷牧, 贾政轩, 公慧, 唐震. 面向智慧物联网的新型嵌入式仿真技术研究[J]. 系统仿真学报, 2022, 34(3): 419-441.
[7]	施国强, 刘泽伟, 林廷宇, 徐钊, 杨星熠, 郭丽琴, 贾政轩. 面向复杂产品建模与仿真系统的开放式云架构设计[J]. 系统仿真学报, 2022, 34(3): 442-451.
[8]	孙晓安, 栾小丽, 刘飞. 基于智能优化灰色模型的电子固废预测[J]. 系统仿真学报, 2022, 34(3): 536-542.
[9]	张霖, 王昆玉, 赖李媛君, 任磊. 基于建模仿真的体系工程[J]. 系统仿真学报, 2022, 34(2): 179-190.
[10]	李锋, 魏莹. 社会学习和参照点效应对企业产品决策的影响[J]. 系统仿真学报, 2022, 34(2): 234-246.
[11]	王永志, 李振朝, 刘鹏彧, 王慧. 基于能量算子的三维空间实体LOD建模方法[J]. 系统仿真学报, 2022, 34(2): 247-257.
[12]	聂凯, 曾科军, 孟庆海. 基于深度贝叶斯网络学习的不确定性建模方法[J]. 系统仿真学报, 2022, 34(1): 79-85.
[13]	樊长佳, 杜炎秋, 梁笛, 胡凯, 黄葭燕. COVID-19期间上海市应急医疗资源配置建模与仿真[J]. 系统仿真学报, 2022, 34(1): 93-103.
[14]	张鸾, 罗正军, 周德群. 基于主体的可再生能源电力消纳交易仿真研究[J]. 系统仿真学报, 2022, 34(1): 170-178.
[15]	胡晓峰, 齐大伟. 智能化兵棋系统：下一代需要改变的是什么[J]. 系统仿真学报, 2021, 33(9): 1997-2009.

SCR脱硝系统NO_x排放浓度建模与仿真

Modelling and Simulation for NO_x Emission Concentration of SCR Denitrification System

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

SCR脱硝系统NOx排放浓度建模与仿真

Modelling and Simulation for NOx Emission Concentration of SCR Denitrification System

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

SCR脱硝系统NO_x排放浓度建模与仿真

Modelling and Simulation for NO_x Emission Concentration of SCR Denitrification System