系统仿真学报 ›› 2015, Vol. 27 ›› Issue (11): 2644-2651.

• 建模与仿真理论及方法 • 上一篇    下一篇

作战仿真通信模型建模方法

李元锋1, 刘建平2, 石成英1   

  1. 1.第二炮兵工程大学103教研室,西安 710025;
    2.中国人民解放军61683部队,北京 100094
  • 收稿日期:2014-06-23 修回日期:2014-07-21 出版日期:2015-11-08 发布日期:2020-08-05
  • 作者简介:李元锋(1982-),男,江苏扬州,博士生,工程师,研究方向为作战仿真;刘建平(1966-),男,陕西蓝田,硕士,高工,研究方向为作战仿真;石成英(1964-),男,陕西西安,博士,教授,研究方向为系统工程。

Communication Model Modeling Method in Warfare Modeling and Simulation

Li Yuanfeng1, Liu Jianping2, Shi Chengying1   

  1. 1. The 103rd Department, The Second Artillery Engineering University, Xi’an 710025, China;
    2. Unit 61683 of PLA, Beijing 100094, China
  • Received:2014-06-23 Revised:2014-07-21 Online:2015-11-08 Published:2020-08-05

摘要: 传统通信模型建模方法存在局限性,分析了建模需求的基础上,设计了基于通信效果的通信模型建模方法,结合通信资产的表示,从方法流程、模型输入、输出和仿真实验验证想定4个方面说明了通信模型的有效性和适用性。该方法能够有效的解决通信效果对于作战效能影响分析的问题,节约了开发成本,简化了模型设计,为作战仿真指挥控制、通信、计算机、情报、监视和侦察(Command,Control,Communication,Computer,Intelligence,Surveillance and Reconnaissance,C4ISR)模型设计提供了较好的参考方法

关键词: 作战仿真, 通信模型, 基于效果, 建模方法

Abstract: The limitation of the traditional communication model modeling methods was analyzed. On the basis of detailed analysis the requirements of communication modeling and simulation, the method of communication model modeling method was designed based on the communication effects. It shows how to represent communication asset and combines the input and output of the model with the simulation verification scenario to illustrate the validity and applicability of the communication model. This method can effectively solve the impact analysis of communication problem for operational effectiveness, saves development costs and supplies the reference method of C4ISR model in warfare modeling and simulation.

Key words: warfare simulation, communication model, based on effect, modeling method

中图分类号: