[1] Petering M E H. Effect of block width and storage yard layout on marine container terminal performance[J]. Transportation Research Part E (S1366-5545), 2009, 45(4): 591-610. [2] Caris A, Macharis C, Janssens G K.Network analysis of container barge transport in the port of Antwerp by means of simulation[J]. Journal of Transport Geography (S0966-6923), 2011, 19(1): 125-133. [3] Bruzzone A G, Longo F.3D simulation as training tool in container terminals: The TRAINPORTS simulator[J]. Journal of Manufacturing Systems (S0278-6125), 2013, 32(1): 85-98. [4] 沙梅, 周鑫, 秦天保, 等. 集装箱码头堆场布局优化与仿真研究[J]. 工业工程与管理, 2013, 18(2): 24-30. [5] 韩晓龙, 张少凯, 于航. 基于仿真的集装箱港口装卸工艺对比研究[J]. 系统仿真学报, 2014, 26(5): 1170-1175. [6] Jürgen Böse, Torsten Reiners, Dirk Steenken, et al.Vehicle Dispatching at Seaport Container Terminals Using Evolutionary Algorithms[C]// Proceeding of the 33rd Hawaii International Conference on System Science. Hawaii, USA: R H Sprague (Ed.), 2000: 20-25. [7] 杨静蕾, 丁以中. 集装箱码头设备配置的模拟研究[J]. 系统仿真学报, 2003, 15(8): 1069-1073. [8] I F A Vis, M B M de Koster, MWP Savelsbergh. Minimum Vehicle Fleet Size Under Time-Window Constraints at a Container Terminal[J]. Transportation Science (S0041-1655), 2005, 39(2): 249-260. [9] 钱继锋, 朱晓宁, 刘占东. 集装箱码头装卸设备配置优化研究[J]. 物流技术, 2013, 32(7): 143-146. [10] 张莉, 霍佳震. 基于单船装卸运输模型的集卡配置仿真研究[J]. 系统仿真学报, 2006, 18(12): 3532-3535. [11] 王小变, 韩晓龙. 箱区长度对码头装卸效率影响的仿真分析[J]. 重庆交通大学学报(自然科学版), 2012, 31(3): 521-524. [12] Zhuo Sun, Loo Hay Lee, Ek Peng Chew, et al.MicroPort: A general simulation platform for seaport container terminals[J]. Advanced Engineering Informatics (S1474-0346), 2012, 26(1): 80-89. [13] 郭姝娟, 何凤云, 赵丹. 集装箱码头装卸机械配置优化仿真[J]. 中国航海, 2014, 37(2): 97-101. [14] 李艳. 基于敏捷性的集装箱码头装卸资源配置优化研究 [D]. 镇江: 江苏大学, 2010. |