基于设计结构矩阵的复杂研发项目过程模型

系统仿真学报 ›› 2015, Vol. 27 ›› Issue (9): 2187-2193.

基于设计结构矩阵的复杂研发项目过程模型

杨宝森, 郑柯君, 来玲

天津商业大学,天津 300134

收稿日期:2015-05-12 修回日期:2015-07-10 出版日期:2015-09-08 发布日期:2020-08-07
作者简介:杨宝森(1965-),男,河北枣强,博士,副教授,研究方向为信息系统项目实施与管理;郑柯君(1964-),女,河北南皮,学士,研究方向为工商管理及项目管理;来玲(1966-),女,河北香河,硕士,研究员,研究方向为信息系统项目开发与实施。
基金资助:
国家自然科学基金(71171146)

Process Model of Complex R & D Project Based on Design Structure Matrix

Yang Baosen, Zheng Kejun, Lai Ling

Tianjin University of Commerce, Tianjin 300134, China

Received:2015-05-12 Revised:2015-07-10 Online:2015-09-08 Published:2020-08-07

摘要/Abstract

摘要： 对复杂产品研发过程进行了分析,基于复杂产品研发过程随机因素多的特点,建立了复杂产品研发项目基于设计结构矩阵(DSM)的过程模型;该模型采用多维DSM方式表示复杂产品研发项目活动之间的信息依赖关系、返工概率及返工影响、学习曲线改进率、并行重叠程度、约束情况等,通过案例说明了建模过程,为进一步开发复杂产品研发项目风险分析仿真系统提供了必要的前提条件。

关键词: 复杂产品, 过程模型, 设计结构矩阵, 风险分析

Abstract: Since complex product R&D project is characteristic with more stochastic factors, a process model was established for complex product R&D project. The model made a comprehensive description of complex information dependencies between activities, timing between the upstream and downstream, feedback iterative relationship, parallel overlapping relationship, constraints and process parameters (time parameters, cost parameters, rework probability, rework impact, learning curve, etc.) by multi-view approach. Some case studies were proposed in detail to illustrate the modeling process. This provides new ways and means of the simulation for the complex product R&D project risk analysis.

Key words: complex product, process model, design structure matrix, risk analysis

中图分类号:

杨宝森, 郑柯君, 来玲. 基于设计结构矩阵的复杂研发项目过程模型[J]. 系统仿真学报, 2015, 27(9): 2187-2193.

Yang Baosen, Zheng Kejun, Lai Ling. Process Model of Complex R & D Project Based on Design Structure Matrix[J]. Journal of System Simulation, 2015, 27(9): 2187-2193.

参考文献

[1] 李伯虎, 柴旭东. 复杂产品虚拟样机工程[J]. 计算机集成制造系统, 2002, 8(9): 678-683
[2] 高峰. 基于过程集成的研发项目进度风险分析方法与应用 [D]. 长沙: 国防科学技术大学, 2005.
[3] Yessine A, Falkenburg D, Chelst D.Engineering Design Management: an Information Structure Approach[J]. International Journal of Production Research (S0020-7543), 1999, 37(13): 2957-2975.
[4] Mayer R J, Crump J W.Information Integration for Concurrent Engineering (IICE) Compendium of Methods Report [R]. TX, USA: Knowledge Based Systems, Inc., 1995
[5] Mayer R J.IDEF0 Function Modeling: Are Construction of the Original Air Force report [R]. TX, USA: Knowledge Based Systems, Inc., 1990.
[6] Busby J S, Williams G M.The Value and Limitation of Using Process Modeling to Describe the Manufacturing Organization[J]. International Journal of Production Research(S0020-7543), 1993, 31(9): 2179-2194.
[7] 王计斌. 并行工程环境下产品开发过程研究 [D]. 北京: 清华大学, 1999.
[8] Jensen K.Colored Petri Net: a High level Language for System Design and Analysis[C]. New York: Advances in Petrinets, 1990, 483: 342-416
[9] Gheleb Y Abbasi, Adnan M Mukattsah.Crash PERT Networks Using Mathematical Programming[J]. International Journal of Project Management (S0263-7863), 2001, 19(2): 181-188.
[10] 赵晋敏. 并行工程环境下的产品开发过程管理研究 [D]. 武汉: 华中理工大学, 2001.
[11] Yang Baosen, Liu Lu.A Case Study of Enterprise Application Integration based on Workflow Management System[M]. Beijing, China: Springer, 2007: 425-431.
[12] 范玉顺, 罗海滨, 林慧苹, 等. 工作流管理技术基础[M]. 北京: 清华大学出版社, 2001.
[13] Suh Nam P.The Principle of Design [M]. New York, USA: Oxford U. Press, 1990.
[14] Browning T R.Applying the Design Structure Matrix to System Decomposition and Integration Problems: A Review and New Directions[J]. IEEE Transactions on Engineering Management (S0018-9391), 2001, 48(3): 292-306.
[15] 杨宝森, 刘鲁, 马晨. 基于仿真的随机活动网络进度费用联合风险[J]. 系统工程理论与实践, 2010, 30(11): 2056-2062.
[16] 杨宝森. 基于活动重叠的随机活动网络时间费用模型仿真研究[J]. 系统仿真学报. 2012, 22(4): 684-687.
[17] Cho Soo-Haeng, Eppinger S D.Product R&D Process Modeling Using Advanced Simulation[C]// Proceedings of DETC'01. ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, USA. USA: ASME, 2001.
[18] Lawler E.Combinatorial Optimization: Networks and Matroids[M]. New York, USA: Dover Publications, 1976.
[19] 杨宝森, 来玲, 刘金柱. 复杂产品研发项目过程模型研究[C]// 中国系统工程学会第十八届学术年会论文集, 北京:中国系统工程学会, 2014.
[20] 乐群星, 杨维垣, 宋晨英. 航天器研制项目基准工作分解结构的编制[J]. 项目管理技术, 2006, 4(10): 44-48.
[21] 成虎. 工程项目管理 [M]. 北京: 中国建筑工业出版社, 1997: 42-49.