系统仿真学报 ›› 2015, Vol. 27 ›› Issue (7): 1638-1643.

• 仿真技术应用 • 上一篇    下一篇

具有质量块的悬臂梁压电发电机仿真研究

闫震1, 何青2, 王东平3   

  1. 1.河北农业大学机电工程学院,保定 071001;
    2.华北电力大学能源动力与机械工程学院,北京 102206;
    3.河北农业大学现代科技学院,保定 071001
  • 收稿日期:2015-01-16 修回日期:2015-02-25 出版日期:2015-07-08 发布日期:2020-07-31
  • 作者简介:闫震(1976-),男,河北保定,博士,讲师,研究方向为微能源技术;何青(1962-),男,博士,教授,研究方向为微能源技术;王东平(1972-),女,河北保定,副研究员,研究方向为新能源技术。
  • 基金资助:
    河北省自然科学基金(E2013204069)

Simulation Research on Cantilever Piezoelectric Generator with Mass

Yan Zhen1, He Qing2, Wang Dongping3   

  1. 1. Mechanic & Electronic College, Agricultural University of Hebei, Baoding 071001, China;
    2. School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China;
    3. Modern Science and Technology College, Agricultural University of Hebei, Baoding 071001, China
  • Received:2015-01-16 Revised:2015-02-25 Online:2015-07-08 Published:2020-07-31

摘要: 应用微机电加工技术制造的悬臂梁压电式振动发电机可以无限、持续地为各种低功耗电子器件提供能量。为了提高悬臂梁压电振动发电机的环境适应能力,通过有限元仿真和实验研究,分析了末端附加质量块对固有频率和输出电压的影响规律,结果表明:随着质量块质量的增加,压电梁的固有频率单调下降,而末端相对位移却单调上升;在相同的激励环境中,固有频率接近和末端振幅相同的压电梁输出电压基本一致。

关键词: 悬臂梁, 振动能量收集, 微型振动发电机, 有限元仿真

Abstract: Piezoelectric vibration generator made in MEMS can supply infinitely and continuously energy for low power electronic devices. In order to improve the adaptive capacity to environment of cantilever piezoelectric vibration generator, through the finite element simulation and experimental study, effect law of additional mass on the natural frequencies and output voltage was analyzed. Results show that, as the mass increases, natural frequency of the piezoelectric beam decreases monotonically, while relative displacement of the end monotonically increases; in the same incentive environment, output voltage of piezoelectric beam with close to the natural frequency and same to the end amplitude are basically consistent.

Key words: cantilever, vibration energy harvesting, micro vibration generator, finite element simulation

中图分类号: