[1] |
LinxiaLiao, Jay Lee. A novel method for machine performance degradation assessment based on fixed cycle features test[J]. Journal of Sound and Vibration (S0022-460X), 2009, 326(3): 894-908.
|
[2] |
Huang W, Duane L.An alternative degradation reliability modeling approach using maximum likelihood estimation[J]. IEEE Transactions on Reliability (S0018-9529), 2005, 54(2): 310-317.
|
[3] |
陈循, 陶俊勇, 张春华. 可靠性强化试验与加速寿命试验综述[J]. 国防科技大学学报(S1001-2486), 2002, 24(4): 29-32.
|
[4] |
Hur Jin-Huek, Lee Tae-Cu, Moon Sun-Ae, et al.Thermal reliability analysis of a BLDC motor in a high-speed axial fan by the accelerated-life test and numerical methods[J]. Heat and Mass Transfer (S0947-7411), 2008, 44(11): 1355-1369.
|
[5] |
Xiao Liu, Loon-Ching Tang.Planning sequential constant-stress accelerated life tests with stepwise loaded auxiliary acceleration factor[J]. Journal of statistical planning and inference (S0378-3758), 2010, 140(7): 1968-1985.
|
[6] |
张春华, 陈循, 李岳. 一种新的Weibull分布恒定应力加速寿命试验分析方法[J]. 国防科技大学学报(S1001-2486), 2002, 24(2):81-84.
|
[7] |
朱德磬, 刘宏昭, 原大宁, 等. 高速磨削电主轴可靠性加速寿命试验分析[J]. 机械强度(S1001-9669), 2013, 35(4): 493-497.
|
[8] |
谭源源, 张春华, 陈循, 等. 基于加速寿命试验的剩余寿命评估方法[J]. 机械工程学报, 2010, 46(2): 150-154.
|
[9] |
Pasquale Erto, Massimiliano Giorgio.Assessing high reliability via Bayesian approach and accelerated tests[J]. Reliability Engineering and System Safety (S0951-8320), 2002, 76(2): 301-310.
|
[10] |
Ahmed A Soliman, A H AbdEllah, K S Sultan. Comparison of estimates using record statistics from Weibullmodel: Bayesian and non-Bayesian approaches, computational statistics & data analysis[J]. Computational Statistics & Data Analysis (S0167-9473), 2006, 51(3):2065-2077.
|
[11] |
S Charruau, F Guerin, J Hernandez Dominguez, et al.Reliability Estimation of Aeronautic Component by Accelerated Tests[J]. Microelectronics Reliability (S0026-2714), 2006, 46(9-11): 1451-1457.
|
[12] |
李超. 小子样产品的随机振动加速试验及可靠性评估[D]. 成都: 西南交通大学, 2004.
|
[13] |
P Volf, J Timkova.On selection of optimal stochastic model for accelerated life testing[J]. Reliability engineering and system safety (S0951-8320), 2014, 131(3): 291-297.
|
[14] |
潘骏, 王小云. 基于多元性能参数的加速退化试验方案优化设计研究[J]. 机械工程学报, 2012, 48(2): 30-35.
|
[15] |
Mahera Musallam, Chunyan Yin, Chris Bailey, et al.Application of coupled electro thermal and physics-of-failure-based analysis to the design of accelerated life tests for power modules[J]. Microelectronics Reliability (S0026-2714), 2014, 54(1): 172-181.
|