制动防抱死工况制动器热机耦合特性仿真分析

系统仿真学报 ›› 2016, Vol. 28 ›› Issue (3): 610-619.

制动防抱死工况制动器热机耦合特性仿真分析

张立军, 何臻, 孟德建

同济大学汽车学院,上海 201804

收稿日期:2014-11-19 修回日期:2015-01-20 发布日期:2020-07-02
作者简介:张立军(1972-),男,吉林,博士,教授,研究方向为汽车振动与噪声控制;何臻(1991-), 男,重庆,硕士生,研究方向为汽车振动与噪声控制;孟德建(1982-),男,山东,博士后,研究方向为汽车振动与噪声控制。
基金资助:
国家自然科学基金(51175380)

Computational Investigation into Thermal-mechanical Coupling Characteristics of Disc Brake under Anti-lock Braking Condition

Zhang Lijun, He Zhen, Meng Dejian

School of Automotive Engineering, Tongji University, Shanghai 201804, China

Received:2014-11-19 Revised:2015-01-20 Published:2020-07-02

摘要/Abstract

摘要： 制动工况对制动器的热机耦合特性具有重要影响。建立了三自由度汽车制动动力学模型,制动力由采用滑移率逻辑门限值控制策略的制动防抱死系统(ABS,Anti-lock Brake System)控制,对干路面和湿路面的制动防抱死工况仿真,同时对相应路面非制动防抱死工况仿真,用于比较分析;建立通风盘式制动器热机耦合有限元动力学模型,对不同制动工况制动盘和制动块的热机耦合特性进行仿真,分析了制动防抱死工况制动器热机耦合特性,并通过与非制动防抱死工况比较,探究ABS对制动器热机耦合特性影响。经分析发现,制动防抱死系统引起的制动压力变化以及制动摩擦热功率改变将对热机耦合特性各个指标产生影响。

关键词: 热机耦合特性, 制动防抱死系统, 制动工况, 通风盘式制动器

Abstract: The braking condition has great influence on the thermal-mechanical coupling characteristics of disc brake. A three-degree-of-freedom dynamic model of braking vehicle was built. The braking force was determined by an anti-lock braking system (ABS) which adopted the threshold-logical control strategy of wheel slip rate. With the model, anti-lock braking processes on dry and wet were simulated. In the meantime, for the sake of comparison, non-anti-lock braking processes were simulated on corresponding road. A thermal-mechanical coupling finite element model of a ventilated disc brake was established. Thermal-mechanical coupling characteristics of brake disc and brake lining were calculated under different braking conditions, and the characteristics under anti-lock braking condition were analyzed. The effects of ABS on the characteristics of the brake were studied through comparison with non-anti-lock braking condition. Through analysis, it is found that the variation of braking pressure and the difference in braking frictional thermal power due to ABS control will significantly affect the brake's thermal-mechanical coupling characteristics.

Key words: thermal-mechanical coupling characteristics, anti-lock brake system, braking condition, ventilated disc brake

中图分类号:

U463.51

张立军, 何臻, 孟德建. 制动防抱死工况制动器热机耦合特性仿真分析[J]. 系统仿真学报, 2016, 28(3): 610-619.

Zhang Lijun, He Zhen, Meng Dejian. Computational Investigation into Thermal-mechanical Coupling Characteristics of Disc Brake under Anti-lock Braking Condition[J]. Journal of System Simulation, 2016, 28(3): 610-619.

参考文献

[1] Breuer B, Bill K H.Brake technology handbook[M]. USA: SAE International, 2008.
[2] Limpert R.Brake Design and Safety[M]. USA: SAE International, October 2011.
[3] 黄健萌, 高诚辉. 制动摩擦热的研究动向和发展趋势[C]// 第五届全国青年摩擦学学术会议论文集. 江苏徐州: 中国机械工程学会摩擦学学会青年摩擦学专业委员会, 1999: 190-193.
[4] 高诚辉, 黄健萌, 林谢昭, 等. 盘式制动器摩擦磨损热动力学研究进展[J]. 中国工程机械学报, 2006, 4(1): 83-88.
[5] 林谢昭, 高诚辉, 黄健萌. 制动工况参数对制动盘摩擦温度场分布的影响[J]. 工程设计学报, 2006, 13(1): 45-48.
[6] 孟德建, 张立军, 余卓平. 通风盘式制动器热机耦合理论建模与有限元分析[J]. 同济大学学报: 自然科学版, 2010, 38(6): 890-897.
[7] 张立军, 陈远, 刁坤, 等. 盘式制动器接触压力与热机耦合特性仿真分析[J]. 同济大学学报, 2013, 41(10): 1554-1561.
[8] Zhang L, Meng D, Yu Z.Theoretical Modeling and FEM Analysis of the Thermo-mechanical Dynamics of Ventilated Disc [R]. USA: SAE International, 2010.
[9] Hwang P, Wu X, Jeon Y B.Thermal—mechanical coupled simulation of a solid brake disc in repeated braking cycles[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology (S1350-6501), 2009, 223(7): 1041-1048.
[10] Belhocine A, Bouchetara M.Thermal analysis of a solid brake disc[J]. Applied Thermal Engineering (S1359-4311), 2012, 32: 59-67.
[11] 程军. 汽车防抱死制动系统的理论与实践 [M]. 北京: 北京理工大学出版社, 1999: 1-3.
[12] 李志高. 汽车ABS的控制算法与仿真研究 [D]. 武汉: 武汉理工大学, 2011: 1-2.
[13] Zegelaar P W A. The dynamic response of tyres to brake torque variations and road unevennesses[M]. Delft, The Netherlands: Delft University of Technology, 1998.
[14] 喻凡, 林逸. 汽车系统动力学 [M]. 北京: 机械工业出版社, 2005: 294-296.
[15] 余志生. 汽车理论[M]. 北京: 机械工业出版社, 2009: 116-118.
[16] 范钦珊, 殷雅俊. 材料力学[M]. 北京: 清华大学出版社, 2008: 200-202.