同步带属性对某型抛光机振动特性的影响

doi:10.16182/j.issn1004731x.joss.201710030

系统仿真学报 ›› 2017, Vol. 29 ›› Issue (10): 2468-2474.doi: 10.16182/j.issn1004731x.joss.201710030

同步带属性对某型抛光机振动特性的影响

孙白冰, 朴钟宇

浙江工业大学机械工程学院,杭州 310000

收稿日期:2015-10-10 发布日期:2020-06-04
作者简介:孙白冰(1991-),男,浙江温州,硕士生,研究方向为结构动力学仿真。
基金资助:
国家自然科学基金(51375457,51305397),浙江省科技厅公益性项目(2014C31099),流体动力与机电系统国家重点实验室开放基金(GZKF-201411)

Effect of Properties of Synchronous Belt on Vibration Characteristics of a Polishing Machine

Sun Baibing, Piao Zhongyu

College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310000, China

Received:2015-10-10 Published:2020-06-04

摘要/Abstract

摘要： 液动压悬浮抛光机要求抛光间隙极小以形成抛光液液膜,抛光机微小的振动都可能会对加工造成极大影响。基于Workbench仿真平台,数值模拟了同步带的不同属性对抛光机振动特性的影响。运动分析得出影响同步带横向振动的参数;以此为因素构建正交试验,并进行不同因素及水平下的仿真;衡量各因素对抛光机振动特性的影响,发现材料属性对振动特性影响最大,带宽次之,张紧力最小,并结合实际情况得出最佳组合,有效提高了抛光机的稳定性,实现了结构的优化。

关键词: 同步带, 液动压悬浮抛光, 模态分析, 正交试验

Abstract: To form slurry film, hydrodynamic-suspension polishing machine needs polishing clearance extremely small, so any slight vibration will make tremendous influence on machining. The effect of different properties of synchronous belt on vibration characteristics of polishing machine was simulated by Workbench. Motion analysis shows the parameters which influence on transverse vibration of synchronous belt. Orthogonal test was designed and simulation was made by using above parameters. The results released that the material played an important role than the belt width and tension force. According to actual situation, optimum combination was obtained. Consequently, the stability of the machine was obviously improved. The structure optimization was realized.

Key words: synchronous belt, hydrodynamic suspension polishing, modal analysis, orthogonal test

中图分类号:

TP391.9

孙白冰, 朴钟宇. 同步带属性对某型抛光机振动特性的影响[J]. 系统仿真学报, 2017, 29(10): 2468-2474.

Sun Baibing, Piao Zhongyu. Effect of Properties of Synchronous Belt on Vibration Characteristics of a Polishing Machine[J]. Journal of System Simulation, 2017, 29(10): 2468-2474.

参考文献

[1] 袁志权. 灌装机同步带动力特性分析及结构优化 [D]. 武汉: 武汉理工大学, 2010.
(Yuan Zhiquan.Dynamic analysis and strueture optimization on filling machine timing belt [D]. Wuhan: Wuhan University of Technology, 2010.)
[2] 卢小锐, 高文志, 张良良, 等. 基于Excite-Timing Drive 的正时同步带系统动力学分析[J]. 振动与冲击, 2013, 32(11): 66-69.
(Lu Xiaorui, Gao Wenzhi, Zhang Liangliang, et al.Dynamic analysis of a synchronous belt drive based on EXCITE-TD[J]. Journal of Vibration and Shock, 2013, 32(11): 66-69.)
[3] 杨玉萍, 钱永明, 沈世德. 同步带传动纵向振动的分析[J]. 机械传动, 2002, 26(4): 38-40.
(Yang Yuping, Qian Yongming, Shen Shide.A Study on the Axial Vibrations of Transmission Timing-belt[J]. Journal of Mechanical Transmission, 2002, 26(4): 38-40.)
[4] Abrate S.Vibrations of belts and belt drives[J]. Mechanism & Machine Theory, 1992, 27(6): 645-659.
[5] 杨玉萍, 张小美, 沈世德. 同步带传动系统横向振动的分析研究[J]. 机械设计, 2003, 20(1): 28-30.
(Yang Yuping, Zhang Xiaomei, Shen Shide.Analysis and research on the transverse vibration of synchronous belt transmission system[J]. Journal of Machine Design, 2003, 20(1): 28-30.)
[6] 凌桂龙. ANSYS Workbench 13.0从入门到精通 [M]. 北京: 清华大学出版社, 2012.
(Ling Guilong.ANSYS Workbench 13.0 from beginner to mastery [M]. Beijing: Tsinghua University Press, 2012.)
[7] Chiu J T, Lin Y Y.Modal analysis of multi-layer structure for chemical mechanical polishing process[J]. International Journal of Advanced Manufacturing Technology, 2008, 37(1-2): 83-91.
[8] 胡权威, 乔立红, 张洪伟. 薄壁结构件铣削参数有限元正交优势分析及优化[J]. 机械工程学报, 2013, 49(21): 176-184.
(Hu Quanwei, Qiao Lihong, Zhang Hongwei.Optimization of Thin-walled Part Milling Parameters Based on Finite Element and Orthogonal Dominance Analysis[J]. Journal of Mechanical Engineering, 2013, 49(21): 176-184.)
[9] 成大先. 机械设计手册(第3卷) [M]. 北京: 化学工业出版社, 2002.
(Chen Daxian.Handbook of mechanical design [M]. Beijing: Chemical Industry Press, 2002.)
[10] 张传智. 同步带用材料的现状和发展[J]. 特种橡胶制品, 1997, 18(1): 11-13.
(Zhang Chuanzhi.Present State and Development on Materials Applied to Synchronous Belt[J]. Special Purpose Rubber Products, 1997, 18(1): 11-13.)
[11] 许志杰, 吴运新. 最小二乘复频域法实复系数矩阵的分析[J]. 噪声与振动控制, 2013, 33(3): 21-25.
(Xu Zhijie, Wu Yunxin.Analysis of real and complex coefficient matries using least-square complex frequency domain method[J]. Noise and Vibration Control, 2013, 33(3): 21-25.)
[12] Peeters B, Auweraer H V D, Guillaume P, et al. The polyMAX frequency-domain method: a new standard for modal parameter estimation[J]. Shock and Vibration, 2004, 11(3-4): 395-409.
[13] 刘宁, 苏中. 圆杯型陀螺振子特性的仿真分析[J]. 系统仿真学报, 2013, 25(7): 1657-1662.
(Liu ning, Su zhong. Simulative analysis on vibrator's characteristics of cupped wave gyro[J]. Journal of System Simulation, 2013, 25(7): 1657-1662.)

同步带属性对某型抛光机振动特性的影响

Effect of Properties of Synchronous Belt on Vibration Characteristics of a Polishing Machine

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价

[1]	晏永, 曾京, 徐坤, 赵飞燕. 悬挂阻尼与车辆蛇行运动稳定性关系[J]. 系统仿真学报, 2021, 33(8): 1784-1790.
[2]	刘海江, 徐清清, 汤达. 车身天窗滚边工艺参数优化仿真分析[J]. 系统仿真学报, 2019, 31(6): 1223-1231.
[3]	吴加权, 李红艳, 叶飞, 张馨予, 马琨. 预损伤钢筋混凝土梁有限元数值模拟研究[J]. 系统仿真学报, 2018, 30(9): 3437-3444.
[4]	鲁正平, 郭旭东, 许堂成, 秦锐华. 电磁-永磁式遥控施药胶囊驱动装置优化设计[J]. 系统仿真学报, 2018, 30(2): 747-752.
[5]	朱胜伟, 张丽慧, 洪滔, 章城. 液动压悬浮抛光固液两相流数值模拟[J]. 系统仿真学报, 2017, 29(12): 2993-3000.
[6]	于雅楠. 改善旋翼飞行体气动力参数的正交试验优化设计[J]. 系统仿真学报, 2016, 28(3): 668-675.
[7]	孙首群, 魏会芳, 徐海慧. 汽轮发电机径向固定弹簧单元组等效模型[J]. 系统仿真学报, 2016, 28(3): 683-688.
[8]	陈红永, 范宣华, 王柯颖, 方叶, 肖世富. 基于大规模并行的高超声速飞行器动力学特性仿真[J]. 系统仿真学报, 2015, 27(8): 1715-1720.