系统仿真学报 ›› 2015, Vol. 27 ›› Issue (3): 461-469.

• 建模与仿真理论及方法 • 上一篇    下一篇

一种基于体系结构的仿真使能方法

陈秋瑞, 熊新平, 卿杜政, 张进   

  1. 北京仿真中心航天系统仿真重点实验室, 北京 100854
  • 收稿日期:2014-03-06 修回日期:2014-09-17 出版日期:2015-03-08 发布日期:2020-08-20
  • 作者简介:陈秋瑞(1989-),男,安徽人,硕士,研究方向为体系对抗仿真;熊新平(1965-),男,江西新余人,研究员,研究方向为体系对抗仿真;卿杜政(1970-),男,湖南人,硕士,研究员,研究方向为体系和武器系统仿真,仿真支撑软件等。

Simulation-Enable Method Based on Architecture

Chen Qiurui, Xiong Xinping, Qing Duzheng, Zhang Jin   

  1. Science and Technology on Special System Simulation Laboratory Beijing Simulation Center, Beijing 100854, China
  • Received:2014-03-06 Revised:2014-09-17 Online:2015-03-08 Published:2020-08-20

摘要: 分析了体系结构仿真使能的需求,基于该需求研究了体系结构完备可执行的条件,扩展了体系结构描述规范,提出了满足完备性条件的一种可执行体系结构框架,给出了该框架的开发流程,并基于该框架提出了基于体系结构产品的仿真使能方法,介绍由体系结构产品直接产生仿真平台建模输入的映射理论和转换方法。该方法为提高仿真模型开发效率、保持系统设计和系统仿真之间的一致性提供了一种有效途径。以某给水系统作为案例,验证了体系结构建模到映射转换生成仿真模型的整个流程。

关键词: 体系结构, 仿真使能, 视图, CISE(基于组件的一体化建模仿真环境)

Abstract: Requirements of architect simulation-enable were analyzed which conducted the study of the completeness condition for architect execution and architecture description framework was extended. An executable architecture framework satisfied the completeness condition and its development process was proposed, and upon which simulation-enable method based on executable architecture framework was put forward. The theory of mapping and conversion from architecture products to input of simulation platform was introduced. The method provided an available approach to raise the simulation model development efficiency and keep the consistency of the high level design with simulation system. A water distribution system was taken as an example to validate the theory of architecture modeling and simulation model mapping.

Key words: architecture, simulation-enable, view, CISE (Component-based Integrated Modeling and Simulation Environment)

中图分类号: