嵌入备件库存的设备运维闭环控制系统仿真研究

doi:10.16182/j.issn1004731x.joss.201810027

系统仿真学报 ›› 2018, Vol. 30 ›› Issue (10): 3817-3825.doi: 10.16182/j.issn1004731x.joss.201810027

嵌入备件库存的设备运维闭环控制系统仿真研究

李冰, 王星, 轩华, 王薛苑

郑州大学管理工程学院,河南郑州 450001

收稿日期:2016-08-20 修回日期:2016-12-23 出版日期:2018-10-10 发布日期:2019-01-04
通讯作者: 李冰(1976-),男,河南开封,博士,教授,研究方向为物流优化与控制。
作者简介:李冰(1976-),男,河南开封,博士,教授,研究方向为物流优化与控制。
基金资助:
国家自然科学基金(U1604150), 教育部人文社科项目(15YJC630148)

Simulation Research of Closed Control System for Equipment Operation and Maintenance with Parts Inventory System

Li Bing, Wang Xing, Xuan Hua, Wang Xueyuan

School of Management Engineering, Zhengzhou University, Zhengzhou 450001, China

Received:2016-08-20 Revised:2016-12-23 Online:2018-10-10 Published:2019-01-04

摘要/Abstract

摘要： 高度可靠的设备运行维护系统是企业安全生产的关键与生命线。研究一类嵌入备件库存的设备运维控制系统。该系统由备件库存子系统、设备作业子系统和设备维修子系统以串并混合形式连接,从而形成多级闭环形态。设备运维闭环控制系统属于一类离散事件动态系统,用传统数学解析方法难以描述,利用Simulink仿真平台建立多级闭环设备运维系统仿真模型并进行数值实验,进而剖析系统设备故障率、维修通道规模及维修效率对系统的整体影响,并分析订货策略对备件库存成本的影响。

关键词: 设备运维, 闭环控制系统, 排队网络, 数值仿真

Abstract: The highly reliable equipment operation and maintenance system is very important to enterprise’s safety production. The control system for equipment operation and maintenance with a parts inventory system is generally discussed. The proposed system is composed of a parts inventory subsystem, an equipment operation subsystem and an equipment maintenance subsystem as parallel and series form. And the control system belongs to a multi-level closed loop system. The system is a kind of discrete event dynamic system. So it is difficult to be described with traditional mathematical analysis methods. The multi-class closed control system simulation model is established with Simulink software and the numerical experiments are given. Then the impact of equipment failure rate, maintenance channel size and maintenance efficiency are analyzed. And the effect of ordering strategy on the parts inventory cost is discussed.

Key words: equipment operation and maintenance, closed loop control system, queuing network, numerical simulation

中图分类号:

李冰, 王星, 轩华, 王薛苑. 嵌入备件库存的设备运维闭环控制系统仿真研究[J]. 系统仿真学报, 2018, 30(10): 3817-3825.

Li Bing, Wang Xing, Xuan Hua, Wang Xueyuan. Simulation Research of Closed Control System for Equipment Operation and Maintenance with Parts Inventory System[J]. Journal of System Simulation, 2018, 30(10): 3817-3825.

参考文献

[1] Sipahi R, Delice I.Stability of inventory dynamics in supply chains with three delays[J]. International Journal of Production Economics (S0925-5273), 2010, 123(1): 107-117.
[2] Zheng C Z, Liu Z X, Liu D.Replenishment and equipment maintenance policies considering stochastic spare parts deterioration[J]. Computer Integrated Manufacturing Systems (S0736-5845), 2010, 16(10): 2129-2138.
[3] Zhang C, Wang H Y.Analysis of stability and bullwhip effectin production-inventory systems[J]. Journal of Southeast University (S1003-7985), 2011, 27(1): 101-106.
[4] Chen M, Zhuo F.Repairable spare parts inventory optimization with recovery rate depending on continuous time-varying demand[J]. Computer Integrated Manufacturing Systems (S0736-5845), 2012, 18(5): 1087-1092.
[5] Selcuk B.An adaptive base stock policy for repairable item inventory control[J]. International Journal of Production Economics (S0925-5273), 2013, 143(2): 304-315.
[6] Jiang Y P, Chen Mao Y, Zhou D H.Joint optimization of preventive maintenance and inventory policies for multi-unit systems subject to deteriorating spare part inventory[J]. Journal of Manufacturing Systems (S0278-6125), 2015, 35(4): 191-205.
[7] 任南, 杜强. 基于VMI策略的常用备件库存控制研究[J]. 科学技术与工程, 2012, 12(7): 1580-1583.
Ren Nan, Du Qiang.A study on common spare parts inventory control based on VMI strategy[J]. Science Technology and Engineering (S1671-1815), 2012, 12(7): 1580-1583.
[8] 杨建华, 宋扬. 大型装备备件库存系统动力机制研究[J]. 系统仿真学报, 2014, 26(7): 1589-1597.
Yang Jianhua, Song Yang.Dynamic mechanism of spare parts inventory system for large scale equipment[J]. Journal of System Simulation (S1004-731X), 2014, 26(7): 1589-1597.
[9] 张志华, 应新雅, 费广玉. 串联系统备件满足率分配及配置优化[J]. 系统工程理论与实践, 2015, 35(11): 2987-2992.
Zhang Zhihua, Ying Xinya, Fei Guangyu.Series system spares fill rate allocation and optimization[J]. System Engineering Theory and Practice (S1000-6788), 2015, 35(11): 2987-2992.
[10] Kim J S, Shin K C, Yu H K.Optimal algorithm to determine the spare inventory level for a repairable-item inventory system[J]. Computers and Operations Research (S0305-0548), 1996, 23(3): 289-297.
[11] Diza A, Fu M C.Models for multi-repairable item inventory system with limited repair capacity[J]. European Journal of Operational Research (S0377-2217), 1997, 97(3): 480-492.
[12] Jung B R, Sun B G, Kim J S.Modeling lateral transshipments in multi-echelon repairable item inventory systems with finite repair channels[J]. Computers & Operations Research (S0305-0548), 2003, 30(9): 1401-1417.
[13] Rappold J A, Van R B D. Designing multi-echelon service parts networks with finite repair capacity[J]. European Journal of Operational Research (S0377-2217), 2009, 199(3): 781-792.
[14] Mirzahosseinian H, Piplani R.A study of repairable parts inventory system operating under performance-based contract[J]. European Journal of Operational Research (S0377-2217), 2011, 214(2): 256-261.
[15] 阮智, 李庆民, 黄傲林. 有限维修渠道约束下多级维修供应系统库存控制[J]. 航空学报, 2012, 33(11): 2018-2027.
Ruan Zhi, Li Qingmin, Huang Aolin.Inventory control of multi-echelon maintenance supply system under finite repair channel constraint[J]. Acta Aeronautica et Astronautica Sinica (S1000-6893), 2012, 33(11): 2018-2027.
[16] 罗祎, 阮旻智, 袁志勇. 多级维修供应下可修复备件库存建模与优化[J]. 系统工程理论与实践, 2013, 33(10): 2623-2630.
Luo Y, Ruan M Z, Yuan Z Y.Modeling and optimization of repairable spare parts under the multi-echelon maintenance supply[J]. System Engineering Theory and Practice (S1000-6788), 2013, 33(10): 2623-2630.
[17] 夏国清, 陈红召, 栾添添. 有限维修渠道下两级维修供应系统性能评估模型[J]. 系统工程理论与实践, 2015, 35(4): 1041-1047.
Xia Guoqing, Chen Hongzhao, Luan Tiantian.Performance evaluation model of two level maintenance supply system under limited maintenance channel[J]. System Engineering Theory and Practice (S1000-6788), 2015, 35(4): 1041-1047.

嵌入备件库存的设备运维闭环控制系统仿真研究

Simulation Research of Closed Control System for Equipment Operation and Maintenance with Parts Inventory System

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

[1]	刘爽, 吕超, 饶勇, 王世明. 基于仿真的鲨鱼鳍结构性能分析与研究[J]. 系统仿真学报, 2018, 30(6): 2398-2404.
[2]	徐建新, 袁家俊, 邓云飞. 2024航空铝合金固支靶板分层数抗鸟撞性能研究[J]. 系统仿真学报, 2018, 30(10): 3914-3922.
[3]	任斌, 陈纯毅, 杨华民. 大气湍流光波传输数值仿真技术研究综述[J]. 系统仿真学报, 2017, 29(8): 1631-1640.
[4]	虞跨海, 张旭辉, 徐红玉, 李蓉, 康兴国. 基于数值仿真的引信前冲过载泡沫铝缓冲性能分析[J]. 系统仿真学报, 2017, 29(6): 1311-1316.
[5]	赵未平, 葛贤坤, 刘传武, 祝逢春. 大当量装药外爆对大楼破坏过程仿真研究[J]. 系统仿真学报, 2016, 28(8): 1922-1928.
[6]	薛薇, 徐进康, 贾红艳. 一个分数阶超混沌系统同步及其保密通信研究[J]. 系统仿真学报, 2016, 28(8): 1915-1922.
[7]	李冰, 轩华, 李静. 指数密闭混合运输排队网络的运行机理研究[J]. 系统仿真学报, 2015, 27(7): 1617-1627.
[8]	高海涛, 韩亚丽, 许有熊, 朱松青, 吴在罗. 单边约束动力学模型数值仿真中的误差修正方法[J]. 系统仿真学报, 2015, 27(2): 240-245.
[9]	王艳, 王帅, 刘建国, 熊巍. 基于SPH方法单颗粒磨削TC4动态过程模拟研究[J]. 系统仿真学报, 2015, 27(11): 2865-2872.