基于可接受性标准的复杂产品仿真系统在线评估框架

doi:10.16182/j.issn1004731x.joss.20-FZ0429

系统仿真学报 ›› 2020, Vol. 32 ›› Issue (12): 2324-2331.doi: 10.16182/j.issn1004731x.joss.20-FZ0429

基于可接受性标准的复杂产品仿真系统在线评估框架

孙正霖, 袁伟强, 李蔚清^*

南京理工大学计算机科学与工程学院,江苏南京 210094

收稿日期:2020-03-28 修回日期:2020-06-30 出版日期:2020-12-18 发布日期:2020-12-16
通讯作者: 李蔚清(1974-),男,河南洛阳,博士,副教授,硕导,研究方向为系统仿真等。
作者简介:孙正霖(1995-),男,江苏南京,硕士生,研究方向为系统仿真等;袁伟强(1995-),男,安徽,硕士生,研究方向为系统仿真等。
基金资助:
装备发展部十三五预研基金(61400010205,61400010109,315100104)

An Online Evaluation Framework of Complex Simulation System Based on Acceptability Criteria

Sun Zhenglin, Yuan Weiqiang, Li Weiqing^*

Computer Science and Engineering,Nanjing University of Science and Technology,Nanjing 210094,China

Received:2020-03-28 Revised:2020-06-30 Online:2020-12-18 Published:2020-12-16

摘要/Abstract

摘要： 针对当前复杂仿真系统评估的滞后性问题,提出了基于可接受性标准(Acceptability Criteria,AC)的仿真在线评估方法。通过定性和定量AC到指标的映射模型来建立评估指标体系;引入指标集和评估函数,提出了仿真评估流程有限自动机七元组模型,给出仿真流程到评估自动机的映射关系和基于数据驱动的状态转移机制,实现评估过程自动化执行过程;基于上述成果设计了在线评估工具,通过案例验证了在线评估方法的有效性,表明该方法能够有效解决仿真系统评估滞后性问题。

关键词: 可接受性标准, 在线评估, 有限自动机, 评估工具

Abstract: An online simulation evaluation method based on Acceptability Criteria (AC) for the lag of current complex simulation systems is proposed.A qualitative and quantitative AC to index mapping model is used to establish an evaluation index system.Based on index sets and evaluation functions,a seven-tuple model of a simulation process finite automaton is proposed,and a mapping of the simulation process to automata and a data-driven state transfer mechanism are given.Based on the above results,an online evaluation tool is designed and the effectiveness is verified through a case.The result that the method can effectively solve lag in the evaluation of the simulation system.

Key words: acceptability criteria, online evaluation, finite automaton, evaluation tool

中图分类号:

TP391.9

孙正霖, 袁伟强, 李蔚清. 基于可接受性标准的复杂产品仿真系统在线评估框架[J]. 系统仿真学报, 2020, 32(12): 2324-2331.

Sun Zhenglin, Yuan Weiqiang, Li Weiqing. An Online Evaluation Framework of Complex Simulation System Based on Acceptability Criteria[J]. Journal of System Simulation, 2020, 32(12): 2324-2331.

参考文献 10

[1]	李伟,林圣琳,周玉臣,等.复杂仿真系统可信度评估研究进展[J].中国科学:信息科学,2018,48(7):767-782.Li Wei,Lin Shenglin,Zhou Yuchen,et al.Research Progress on Credibility Assessment of a Complex Simulation System[J].SCIENCE CHINA:Information Sciences,2018,48(7):767-782.
[2]	焦鹏,张琪,魏翔宇,等.仿真可信性评估中的若干问题及对策研究[J].系统仿真学报,2019,31(7):1257-1262.Jiao Peng,Zhang Qi,Wei Xiangyu,et al.Some Problems and Countermeasures in Simulation Credibility Evaluation[J].Journal of System Simulation,2019,31(7):1257-1262.
[3]	杨丽娜,吴晓燕.建模与仿真VV&A工具设计与实现[J].现代防御技术,2008(4):148-152.Yang Lina,Wu Xiaoyan.Design and Actualization of VV&A Tools Used for Modeling and Simulation[J].Modern Defense Technology,2008(4):148-152.
[4]	Polat F,Guvenir H A.UVT:A Unification-based Tool for Knowledge Base Verification[J].IEEE Exper (S0885-9000),1993,8(3):69-75.
[5]	Balci O,Adams R J,Myers D S,et al.A Collaborative Evaluation Environment for Credibility Assessment of Modeling and Simulation Applications[C]//Proceedings of the 2002 Winter Simulation Conference.San Diego,CA,USA:IEEE,2002.
[6]	王达.多武器平台仿真系统数据VV&C技术研究[D].哈尔滨:哈尔滨工业大学,2006.Wang Da.The Research of Multiple Armament Platform Simulation Data VV&C[D].Harbin:Harbin Institute of Technology,2006.
[7]	杨明,方可.仿真可信度评估辅助工具研究[J].计算机仿真,2010,27(6):118-121,154.Yang Ming,Fang Ke.Research on the Simulation Credibility Evaluation Assistant Tool Based on Hierarchical Evaluation[J].Computer Simulation,2010,27(6):118-121,154.
[8]	DoD M&SCO.M&S VV&A RPG Special Topic:Acceptability Criteria[EB/OL].[2019-05-05].http://www.msco.mil.
[9]	DoD M&SCO.M&S VV&A RPG Special Topic:Requirements[EB/OL].[2019-05-05].http://www.msco.mil.
[10]	DoD M&SCO.M&S VV&A RPG Special Topic:Measures[EB/OL].[2019-05-05].http://www.msco.mil.

基于可接受性标准的复杂产品仿真系统在线评估框架

An Online Evaluation Framework of Complex Simulation System Based on Acceptability Criteria

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 10

相关文章 1

编辑推荐

Metrics

本文评价