自动化集装箱码头U型工艺仿真研究

doi:10.16182/j.issn1004731x.joss.20-0643

系统仿真学报 ›› 2021, Vol. 33 ›› Issue (12): 2944-2951.doi: 10.16182/j.issn1004731x.joss.20-0643

• 仿真模型/系统置信度评估技术 • 上一篇下一篇

自动化集装箱码头U型工艺仿真研究

丁一, 李甜甜

上海海事大学物流科学与工程研究院,上海 201306

收稿日期:2020-08-31 修回日期:2020-11-06 出版日期:2021-12-18 发布日期:2022-01-13
作者简介:丁一(1980-),男,博士,副教授,研究方向为港口运作优化。E-mail：yiding@shmtu.edu.cn
基金资助:
国家自然科学基金(71972128)

Simulation Research on U-Automated Container Terminal

Ding Yi, Li Tiantian

Institute of Logistics Science & Engineering, Shanghai Maritime University, Shanghai 201306, China

Received:2020-08-31 Revised:2020-11-06 Online:2021-12-18 Published:2022-01-13

摘要/Abstract

摘要： 为分析自动化集装箱码头采用U型工艺布局对码头装卸作业效率的影响,利用FlexTerm仿真软件建立U型工艺自动化码头仿真模型,可视化码头作业流程,并对比分析不同作业模式下传统布局自动化码头的作业效率,比较2种码头布局中各资源设备AGV（Automated Guided Vehicle）、场桥和岸桥的作业能力。仿真结果表明：U型工艺创新的堆场布局和装卸工艺,使码头各装卸设备的作业能力相较于传统自动化码头都有所提高,证明了U型工艺的优势,配置合理数量的码头资源设备可以提高U型工艺码头整体作业效率。

关键词: 自动化码头, U型工艺, 堆场布局, 装卸工艺, FlexTerm仿真

Abstract: To analyze the new U-layout effect on the handling operation efficiency in automated container terminal, the U-automated container terminal simulation model is established by FlexTerm software to visualize the handling operation process. The traditional automated terminal simulation model is established to compare the working efficiency under different working modes. The working ability of terminal handling equipment such as AGV（Automated Guided Vehicle）, yard cranes and rail-mounted gantry cranes are compared by simulation tests. Simulation results show that due to the creation of yard layout and handling technology, the superiority of U-layout is proved when the working efficiency of each handling equipment has been improved compared with the traditional automated container terminal, which improves a reasonable handling equipment configurations can also improve the operation efficiency in U-terminal.

Key words: automated terminal, U-layout, yard layout, handling technology, FlexTerm simulation

中图分类号:

TP391.9

丁一, 李甜甜. 自动化集装箱码头U型工艺仿真研究[J]. 系统仿真学报, 2021, 33(12): 2944-2951.

Ding Yi, Li Tiantian. Simulation Research on U-Automated Container Terminal[J]. Journal of System Simulation, 2021, 33(12): 2944-2951.

参考文献

[1] Lee B K, Lee L H, Chew E P.Analysis on High Throughput Layout of Container Yards[J]. International Journal of Production Research (S0020-7543), 2018, 56(16): 5345-5364.
[2] Liu C I, Jula H, Vukadinovic K, et al.Automated Guided Vehicle System for Two Container Yard Layouts[J]. Transportation Research Part C (S0968-090X), 2004, 12(5): 349-368.
[3] 高延辉, 魏世桥, 周强, 等. 基于双轨轮小车与双回字形平面布置的集装箱码头新工艺[J]. 港口装卸, 2015(4): 43-47.
Gao Yanhui, Wei Shiqiao, Zhou Qiang, et al.New Process on the Container Terminal Based on Dual-rail Horizontal Transport Trolley and the Horizontal Layout of Hollow Track[J]. Port Operation, 2015(4): 43-47.
[4] Gharehgozli A, Zaerpour N, Koster R D. Container Terminal Layout Design: Transition and Future[J/OL]. Maritime Economics & Logistics (S1479-2931), (2019-10-15) [2020-04-13]. https://www.researchgate. net/publication/336572010_Container_terminal_layout_design_transition_and_future.
[5] Arango C, Cortés P, Muñuzuri J, et al.Berth Allocation Planning in Seville Inland Port by Simulation and Optimization[J]. Advanced Engineering Informatics (S1474-0346), 2011, 25(3): 452-461.
[6] Carlo H J, Fernando L, Martínez-Acevedo.Priority Rules for Twin Automated Stacking Cranes that Collaborate[J]. Computers & Industrial Engineering (S0360-8352), 2015, 89: 23-33.
[7] Vis I F A, Harika I. Comparison of Vehicle Types at an Automated Container Terminal[J]. OR Spectrum (S0171-6468), 2004, 26(1): 117-143.
[8] 谢媛媛. XHCT集装箱码头堆场资源优化研究[D]. 厦门: 集美大学, 2015.
Xie Yuanyuan.Research on Optimization Resource of XHCT Container Terminal Yard[D]. Xiamen: JiMei University, 2015.
[9] Gharehgozli A H, Vernooij F G, Zaerpour N.A Simulation Study of the Performance of Twin Automated Stacking Cranes at a Seaport Container Terminal[J]. European Journal of Operational Research (S0377-2217), 2017, 261(1): 108-128.
[10] Kavakeb S, Nguyen T T, McGinley K, et al. Green Vehicle Technology to Enhance the Performance of a European Port: A Simulation Model With a Cost-benefit Approach[J]. Transportation Research Part C (S0968-090X), 2015, 60: 169-188.
[11] 韩晓龙, 张少凯. 基于仿真的集装箱港口装卸工艺对比研究[J]. 系统仿真学报, 2014, 26(5): 1170-1175.
Han Xiaolong, Zhang Shaokai.Comparative Research of Handling Technologies Based on Simulation in Container Terminal[J]. Journal of System Simulation, 2014, 26(5): 1170-1175.
[12] 于航, 乐美龙. 装卸同步工艺下前方堆场布局分散度仿真研究[J]. 系统仿真学报, 2015, 27(5): 1127-1132, 1137.
Yu Hang, Le Meilong.Research of Marshalling Yard Dispersion Based on Simulation in Container Terminal[J]. Journal of System Simulation, 2015, 27(5): 1127-1132, 1137.
[13] 周鹏飞, 邢小伟. 一种新型自动化集装箱码头工艺布局仿真[J]. 大连理工大学学报, 2018, 58(4): 363-370.
Zhou Pengfei, Xing Xiaowei.Layout Simulation of a New Automated Container Terminal[J]. Journal of Dalian University of Technology, 2018, 58(4): 363-370.
[14] Dulebenets M A, Golias M M, Mishra S, et al.Evaluation of the Floaterm Concept at Marine Container Terminals via Simulation[J]. Simulation Modelling Practice and Theory (S1569-190X), 2015, 54: 19-35.

自动化集装箱码头U型工艺仿真研究

Simulation Research on U-Automated Container Terminal

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	刘志雄, 董宇, 张春君. 件杂货码头堆场布局优化研究[J]. 系统仿真学报, 2021, 33(6): 1436-1443.
[2]	谢旦岚, 郭笛, 纪媛, 高志蓬. 自动化码头运输设备充电策略优化的仿真研究[J]. 系统仿真学报, 2020, 32(10): 1927-1935.
[3]	于航, 乐美龙. 装卸同步工艺下前方堆场布局分散度仿真研究[J]. 系统仿真学报, 2015, 27(5): 1127-1132.