[1] Gong L, Kyriakides S, Jang W Y.Compressive response of open-cell foams. Part I: Morphology and elastic properties[J]. International Journal of Solids and Structures (S0020-7683), 2005, 42: 1355-1379. [2] Okumura Dai, Okada Atsushi, Ohno Nobutada.Buckling behavior of Kelvin open-cell foams under [0 0 1], [0 1 1] and [1 1 1] compressive loads[J]. International Journal of Solids and Structures (S0020-7683), 2008, 45: 3807-3820. [3] Ashby M F, Evans A, Fleck N A, Gibson L J, Hutchinson J W, Wadley H N G. Metal Foams: A Design Guide[M]. Boston, USA: Butterworth-Heinemann, 2000. [4] Bensoussan A, LionsJ-L, Papanicolaou G. Asymptotic Analysis for Periodic Structures[M]. Amsterdam, The Netherlands: North-Holland, 1978. [5] Gan Y X, Chen C, Shen Y P.Three-dimensional modeling of the mechanical property of linearly elastic open cell foams[J]. International Journal of Solids and Structures (S0020-7683), 2005, 42: 6628-6642. [6] Takahashi Yuji, Okumura Dai, Ohno Nobutada.Yield and buckling behavior of Kelvin open-cell foams subjected to uniaxial compression[J]. International Journal of Mechanical Sciences (S0020-7403), 2010, 52: 377-385 [7] Gibson L J, Ashby M F.Cellular solids: structure and properties [M]. 2nd ed. Cambridge, UK: Cambridge University Press, 1997. [8] Lu Zixing, Liu Qiang, Huang Jixiang.Analysis of defects on the compressive behaviors of open-cell metal foams through models using the FEM[J]. Materials Science and Engineering A (S0921-5093), 2011, 530: 285-296. [9] Harb Rani, Taciroglu Ertugrul, Ghoniem Nasr.Partitioning of elastic energy in open-cell foams under finite deformations[J]. Acta Materialia (S1359-6454), 2013, 61: 1454-1468. [10] Kucherov Leonid, Ryvkin Michael.Fracture toughness of open-cell Kelvin foam[J]. International Journal of Solids and Structures (S0020-7683), 2014, 51: 440-448. [11] Demiray Serkan, Becker Wilfried, Hohe Jörg.Investigation of the fatigue behavior of open cell foams by a micromechanical 3-D model[J]. Materials Science and Engineering A (S0921-5093), 2009, 504: 141-149. [12] Kumar Prashant, Topin Frederic, Vicente Jerome.Determination of effective thermal conductivity from geometrical properties: Application to open cell foams[J]. International Journal of Thermal Sciences (S1290-0729), 2014, 81: 13-28. [13] Jang Wen-Yea, Kraynik Andrew M, Kyriakides Stelios.On the microstructure of open-cell foams and its effect on elastic properties[J]. International Journal of Solids and Structures (S0020-7683), 2008, 45: 1845-1875. [14] Gaitanaros Stavros, Kyriakides Stelios, Kraynik Andrew M.On the crushing response of random open-cell foams[J]. International Journal of Solids and Structures (S0020-7683), 2012, 49: 2733-2743. [15] Jang Wen-Yea, Kyriakides Stelios, Kraynik Andrew M.On the compressive strength of open-cell metal foams with Kelvin and random cell structures[J]. International Journal of Solids and Structures (S0020-7683), 2010, 47: 2872-2883. [16] Mills N J.The high strain mechanical response of the wet Kelvin model for open-cell foams[J]. International Journal of Solids and Structures (S0020-7683), 2007, 44: 51-65. [17] Sullivan Roy M, Ghosn Louis J.Shear moduli for non-isotropic, open cell foams using a general elongated Kelvin foam model[J]. International Journal of Engineering Science (S0020-7225), 2009, 47: 990-1001. [18] Johnson G R, Cook W H.Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering fracture mechanics (S0013-7944), 1985, 21(1): 31-48. [19] Schwer L.Aluminum plate perforation: a comparative study using Lagrange with erosion, multi-material ALE, and smooth particle hydrodynamics[C]// 7th European LS-DYNA Conference. Salzburg, Austria: LSTC, 2009. |