[1] 刘合, 裴晓含, 罗凯, 等. 中国油气田开发分层注水工艺技术现状与发展趋势[J]. 石油勘探与开发, 2013, 40(6): 733-737. (Liu He, Pei Xiaohan, Luo Kai, et al.Current Status and Trend of Separated Layer Water Flooding in China[J]. Petroleum Exploration and Development (S1000-0747), 2013, 40(6): 733-737.) [2] 王立翀, 吕祥鸿, 张志雄, 等. 断裂油管失效分析[J]. 腐蚀与防护, 2014, 35(3): 302-305. (Wang Lichong, Lv Xianghong, Zhang Jun, et al.Failure Analysis of Fractured Tubing[J]. Corrosion & Protection (S1005-748X), 2014, 35(3): 302-305.) [3] 王艳红, 付路长, 王旱祥. 注水管柱可靠性分析与寿命评估[J]. 石油矿场机械, 2008, 37(6): 75-77. (Wang Yanhong, Fu Luchang, Wang Hanxiang.The Reliability Analysis and Life Evaluation on Water Injection Casing[J]. Oil Field Equipment (S1001-3482), 2008, 37(6): 75-77.) [4] Miller A G.Review of limit loads of structures contain-ing defects[J]. International Journal of Pressure Vessels and Piping (S0308-0161), 1988, 32(1): 197-327. [5] Jones M R, Eshelby J M.Limit solutions for circumferentially cracked cylinders under internal pressure and combined tension and bending [R]// Nuclear Electric Report TD/SID/REP/0032, 1990. [6] 俞树荣, 柴宝堆, 凌晓, 等. 轴向裂纹对海洋立管疲劳寿命影响的数值分析[J]. 兰州理工大学学报, 2014, 40(1): 59-63. (Yu Shurong, Chai Baodui, Ling Xiao, et al.Numerical Analysis on Effect of Axial Crack on Marine Riser Fatigue Life[J]. Journal of Lanzhou Univisity of Technology (S1673-5196), 2014, 40(1): 59-63.) [7] 周思柱, 何迪, 吕志鹏. 用有限元方法研究含缺陷油管失效判据[J]. 石油矿场机械, 2006, 35(6): 19-22. (Zhou Sizhu, He Di, LV Zhipeng.Study The Waste Standard of The Defective Oil Pipe by Finite Element Method[J]. Oil Field Equipment (S1001-3482), 2006, 35(6): 19-22.) [8] 丛成龙, 李惠荣. 内压作用下含内表面环向裂纹光滑弯管的应力强度因子[J]. 石油化工设备, 2007, 36(2): 33-35. (Cong Chenglong, Li Huirong.Stress Intensity Factor of Circumferential Annular Cracks in Bend Pipe under Internal Pressure[J]. Petro-Chemical Equipment (S000-7466), 2007, 36(2): 33-35.) [9] American Petroleum Institute.API RP 5C5 Recommended practice for evaluation procedure for casing and tubing connection[S]. Washington DC, USA: American Petroleum Institute, 2003. [10] American Petroleum Institute.API SPEC 5C5 Specifica-tion for Casing and Tubing[S]. Washington DC, USA: American Petroleum Institute, 2011. [11] 王学岐, 樊建春, 张来斌. 偏磨油管剩余强度有限元分析[J]. 润滑与密封, 2009, 33(12): 47-48. (Wang Xueqi, Fan Jianchun, Zhang Laibin.Finite Element Ananlysis on Residual Strength of Eccentric Worn Tubing[J]. Lubrication Engineering (S0254-0150), 2009, 33(12): 47-48.) |