[1] Lee W K, Ho C H, Van Zee J W, et al. The Effects of Compression and Gas Diffusion Layers on the Performance of a PEM Fuel Cell[J]. Journal of Power Sources (S0378-7753), 1999, 84(1): 45-51. [2] Kandlikar S G, Lu Z, Lin T Y, et al.Uneven Gas Diffusion Layer Iintrusion in Gas Channel Arrays of Proton Exchange Membrane Fuel Cell and Its Effects on Flow Distribution[J]. Journal of Power Sources (S0378-7753), 2009, 194(1): 328-337. [2] Mason T J, Millichamp J, Shearing P R, et al.A Study of the Effect of Compression on the Performance of Polymer Electrolyte Fuel Cells Using Electrochemical Impedance Spectroscopy and Dimensional Change Analysis[J]. International Journal of Hydrogen Energy (S0360-3199), 2013, 38(18): 7414-7422. [4] Sadeghi E, Djilali N, Bahrami M.Effective Thermal Conductivity and Thermal Contact Resistance of Gas Diffusion Layers in Proton Exchange Membrane Fuel Cells. Part 1: Effect of Compressive Load[J]. Journal of Power Sources (S0378-7753), 2011, 196(1): 246-254. [5] Roshandel R, Farhanieh B, Saievar-Iranizad E.The Effects of Porosity Distribution Variation on PEM Fuel Cell Performance[J]. Renewable Energy (S0960-1481), 2005, 30(10): 1557-1572. [6] Su Z Y, Liu C T, Chang H P, et al.A Numerical Investigation of the Effects of Compression Force on PEM Fuel Cell Performance[J]. Journal of Power Sources (S0378-7753), 2008, 183(1): 182-192. [7] Mikkola M, Tingelof T, Ihonen J K.Modelling Compression Pressure Distribution in Fuel Cell Stacks[J]. Journal of Power Sources (S0378-7753), 2009, 193(1): 269-275. [8] Bates A, Mukherjee A, Hwang S, et al.Simulation and Experimental Analysis of the Clamping Pressure Distribution in a PEM Fuel Cell Stack[J]. International Journal of Hydrogen Energy (S0360-3199), 2013, 15(38): 6481-6493. [9] Carral C, Mele P.A Numerical Analysis of PEMFC Stack Assembly through a 3D Finite Element Model[J]. International Journal of Hydrogen Energy (S0360-3199), 2014, 39(9): 4516-4530. [10] Jiao K, Park J, Li X.Experimental investigations on liquid water removal from the gas diffusion layer by reactant flow in a PEM fuel cell[J]. Applied Energy (S0306-2619), 2010, 87(9): 2770-2777. [11] Tomadakis M M, Robertson T J.Viscous permeability of random fiber structures: comparison of electrical and diffusional estimates with experimental and analytical results[J]. Journal of Composite Materials (S0021-9983), 2005, 39(2): 163-188. |