系统仿真学报 ›› 2016, Vol. 28 ›› Issue (4): 946-950.

• 仿真应用工程 • 上一篇    下一篇

R-C型逐次逼近ADC D/A转换网络功耗模型与仿真

佟星元, 张洋   

  1. 西安邮电大学 电子工程学院,陕西 西安 710121
  • 收稿日期:2014-11-07 修回日期:2015-01-20 出版日期:2016-04-08 发布日期:2020-07-02
  • 作者简介:佟星元(1984-),男,河北保定,博士,副教授,硕导,研究方向为低功耗集成电路设计、超低功耗A/D转换器设计与建模仿真等;张洋(1991-),女,陕西西安,硕士生,研究方向为低功耗A/D转换设计与建模。
  • 基金资助:
    国家自然科学基金(61204029);国家重大科技专项(2016ZX03001003-006);陕西省自然科学基金(2014JQ8332)

Power modeling and simulation for D/A network in R-C hybrid SAR ADC

Tong Xingyuan, Zhang Yang   

  1. School of Electronic Engineering, Xi'an Univ. of Posts & Telecommunications, Xi'an 710121, China
  • Received:2014-11-07 Revised:2015-01-20 Online:2016-04-08 Published:2020-07-02

摘要: 逐次逼近(SAR: Successive Approximation Register)ADC广泛应用于低功耗电路系统,为指导低功耗SAR ADC的设计优化,对其D/A转换网络的功耗进行了建模研究。重点针对适用于中高精度应用的R-C组合型D/A转换网络,基于Matlab工具建立了电容阵列的能耗模型,并结合65 nm CMOS工艺,同时考虑电阻梯的静态功耗以及电容阵列的动态功耗,获得了SAR ADC R-C组合型D/A转换网络的功耗模型, 在此基础上,以12-bit SAR ADC为设计实例,在考虑无源器件匹配性的前提下,分别针对“5+7”、“6+6”以及“7+5”三种典型的R-C组合结构进行了功耗仿真和比较,研究结果对低功耗SAR ADC的设计和优化具有重要指导意义

关键词: 逐次逼近ADC, D/A转换网络, 能耗模型, 低功耗

Abstract: D/A conversion network of SAR (SAR: Successive Approximation Register) ADC was discussed. The energy model of the capacitor array in R-C hybrid D/A network was established by using MATLAB. With the combination of resistor string’s static power and capacitor array’s switching power, the power model of the R-C hybrid network in SAR ADC was proposed based on a 65nm CMOS process. Furthermore, by considering matching requirement for the passive components, 12-bit R-C hybrid D/A networks with “5+7”, “6+6” and “7+5” type of structures were simulated and compared. The research can provide significant guidance for circuit design and optimization of low-power SAR ADC.

Key words: successive approximation register (SAR), D/A conversion network, energy model, low-power

中图分类号: