[1] Bouzakis K D, Lili E, Michailidis N, et al. Manufacturing of cylindrical gears by generating cutting processes: A critical synthesis of analysis methods[J]. CIRP Annals-Manufacturing Technology (S0007-8506), 2008, 57(2): 676-696. [2] Bhattacharyya A, Deb S R.Mechanics of gear hobbing[J]. Journal of Manufacturing Science and Engineering (S1087-1357), 1970, 92(1): 103-108. [3] Abood A M, Bicker R, Pennell T.An analysis of cutting forces in gear hobbing[J]. VDI BERICHTE (S0083-5560), 2002, 1665: 255-262. [4] Bouzakis K D.Konzept und technologische Grundlagen zur automatisierten Erstellung optimaler Bearbeitungsdaten beim Wälzfräsen[M]. Aachen, Deutschland: VDI-Verlag, 1981. [5] Gutmann P.Zerspankraftberechnung beim Walzfrasen [D]. Aachen, Deutschland: RWTH, 1988. [6] Antoniadis A, Vidakis N, Bilalis N.Fatigue fracture investigation of cemented carbide tools in gear hobbing, part 1: FEM modeling of fly hobbing and computational interpretation of experimental results[J]. Journal of Manufacturing Science and Engineering (S1087-1357), 2002, 124(4): 784-791. [7] Vasilis D, Nectarios V, Aristomenis A.Advanced computer aided design simulation of gear hobbing by means of three-dimensional kinematics modeling[J]. Transactions-American Society of Mechanical Engineers Journal of Manufacturing Science and Engineering (S1087-1357), 2007, 129(5): 911. [8] Nikolaos T, Aristomenis A.CAD-Based Calculation of Cutting Force Components in Gear Hobbing[J]. Journal of Manufacturing Science and Engineering (S1087-1357), 2012, 134(3): 031009. [9] Bouzakis K D, Aichouh P, Efstathiou K.Determination of the chip geometry, cutting force and roughness in free form surfaces finishing milling, with ball end tools[J]. International Journal of Machine Tools and Manufacture (S0890-6955), 2003, 43(5): 499-514. [10] Yip-Hoi D, Huang X.Cutter/workpiece engagement feature extraction from solid models for end milling[J]. Journal of Manufacturing Science and Engineering (S1087-1357), 2006, 128(1): 249-260. [11] Yang Y, Zhang W, Wan M, et al. A solid trimming method to extract cutter-workpiece engagement maps for multi-axis milling[J]. The International Journal of Advanced Manufacturing Technology (S0268-3768), 2013, 68(9-12): 2801-2813. [12] Kyratsis P, Bilalis N, Antoniadis A.CAD based predictive models of the undeformed chip geometry in drilling[J]. International Journal of Mechanical Systems Science and Engineering (S1087-1357), 2009, 1(3): 129-134. [13] Antoniadis A.Gear skiving—CAD simulation approach[J]. Computer-Aided Design (S0010-4485), 2012, 44(7): 611-616. [14] Piegl L A, Tiller W.The NURBS book[M]. New York, USA: Springer, 1997. |