动叶可调轴流风机叶顶间隙形态的优化研究

doi:10.16182/j.issn1004731x.joss.201810041

系统仿真学报 ›› 2018, Vol. 30 ›› Issue (10): 3939-3948.doi: 10.16182/j.issn1004731x.joss.201810041

动叶可调轴流风机叶顶间隙形态的优化研究

叶学民, 崔建光, 李春曦

电站设备状态监测与控制教育部重点实验室(华北电力大学),河北保定 071003

收稿日期:2016-08-19 修回日期:2016-10-09 出版日期:2018-10-10 发布日期:2019-01-04
作者简介:叶学民(1973-),男,河北邢台,博士,教授,研究方向为流体机械、流体动力学理论及应用;崔建光(1991-),男,河北承德,硕士生,研究方向为流体机械。

Optimization of Tip Clearance Patterns of Variable-pitch Axial Flow Fan

Ye Xuemin, Cui Jianguang, Li Chunxi

Key Lab of Condition Monitoring and Control for Power Plant Equipment of Education Ministry (North China Electric Power University),Baoding 071003, China

Received:2016-08-19 Revised:2016-10-09 Online:2018-10-10 Published:2019-01-04

摘要/Abstract

摘要： 优化叶顶间隙形态可有效改善轴流风机的性能。以OB-84型动叶可调轴流风机为对象,采用Fluent模拟了均匀间隙及非均匀间隙下的风机性能,探讨了不同间隙形态对间隙内泄漏流场及损失分布的影响。研究表明：在平均叶顶间隙不变的前提下,采用渐缩型间隙的风机全压与效率均高于均匀间隙,高效区范围扩大,且渐缩程度越大,性能提升越显著;渐缩型间隙改变了间隙内涡量场的分布,叶顶泄漏损失减少,叶片中上部做功能力增强。而采用渐扩型间隙后做功能力下降,风机性能均低于均匀间隙。渐缩型叶顶间隙形态可作为一种提高风机性能的重要手段加以实施。

关键词: 轴流风机, 叶顶间隙形态, 气动性能, 泄漏流, 内流特征

Abstract: The performance of the axial fan can be improved by optimization of blade tip pattern effectively. For a variable pitch axial flow fan of OB-84 type, the performance of the fan with uniform tip clearance and non-uniform tip clearance are simulated by using Fluent. The impacts of tip patterns on leakage flow field and loss distribution in the tip clearance are examined. The results reveal that when average tip clearance keeps constant, the total pressure rise and efficiency of the fan with convergent tip clearance patterns are higher than those of uniform tip clearance, and the domain of higher efficiency is expanded. With the increase of convergent level, the improvement of performance tends to be appreciable. Convergent tip clearance changes the distribution of vorticity field, resulting in the reduction of leakage losses of blade tip and the promotion of work capability in the middle and upper part of blade. When the divergent tip clearance patterns are employed, the work capability of blade is declined, leading to slightly decreased fan performance compared to the uniform blade tip. The convergent tip clearance pattern is considered as a preferred mean to improve fan performance in practical applications.

Key words: axial flow fan, tip clearance patterns, aerodynamic performance, leakage flow, internal dynamics

中图分类号:

TH4
O355

叶学民, 崔建光, 李春曦. 动叶可调轴流风机叶顶间隙形态的优化研究[J]. 系统仿真学报, 2018, 30(10): 3939-3948.

Ye Xuemin, Cui Jianguang, Li Chunxi. Optimization of Tip Clearance Patterns of Variable-pitch Axial Flow Fan[J]. Journal of System Simulation, 2018, 30(10): 3939-3948.

参考文献

[1] You D, Wang M, Moin P, et al.Effects of tip-gap size on the tip-leakage flow in a turbomachinery cascade[J]. Physics of Fluids (S1089-7666), 2006, 18(10): 105-102.
[2] 李春曦, 林卿, 叶学民. 单动叶安装角异常时轴流风机的噪声特性[J]. 中国电机工程学报, 2015, 35(5): 1183-1192.
Li Chunxi, Lin Qing, Ye Xuemin.Acoustic characteristics of an axial flow fan with abnormal installation angle of single blade[J]. Proceedings of the CSEE, 2015, 35(5): 1183-1192.
[3] Yamada K, Kikuta H, Furukawa M, et al.Effects of tip clearance on the stall inception process in an axial compressor rotor[C]// ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT2013-95479. USA: American Society of Mechanical Engineers, 2013: 1-13.
[4] Nho Y C, Park J S, Lee Y J, et al.Effects of turbine blade tip shape on total pressure loss and secondary flow of a linear turbine cascade[J]. International Journal of Heat and Fluid Flow (S0142-727X), 2012, 33(1): 92-100.
[5] 叶学民, 李鹏敏, 李春曦. 叶顶开槽对轴流风机性能影响的数值研究[J]. 中国电机工程学报, 2015, 35(3): 652-659.
Ye Xuemin, Li Pengmin, Li Chunxi.Numerical investigation of grooved blade tips effect on the performance of an axial flow fan[J]. Proceedings of the CSEE, 2015, 35(3): 652-659.
[6] Kügeler E, Nürnberger D, Weber A, et al.Influence of blade fillets on the performance of a 15 stage gas turbine compressor[C]// ASME Turbo Expo 2008: Power for Land, Sea, and Air. USA: American Society of Mechanical Engineers, 2008: 415-424.
[7] 成锋娜, 常海萍, 张镜洋, 等. 突肩叶尖尾缘开槽对间隙流动换热特性的影响[J]. 航空动力学报, 2016, 31(2): 383-390.
Cheng Fengna, Chang Haiping, Zhang Jingyang, et al.Tip leakage flow and heat transfer characteristics with effect of trailing edge cutback on squealer tip[J]. Journal of Aerospace Power, 2016, 31(2): 383-390.
[8] Shavalikul A, Camci C.A comparative analysis of pressure side extensions for tip leakage control in axial turbines[C]// ASME Turbo Expo 2008: Power for Land, Sea, and Air. USA: American Society of Mechanical Engineers, 2008: 1279-1288.
[9] 韩少冰, 钟兢军, 严红明. 不同长度吸力面小翼对压气机叶栅间隙影响的数值研究[J]. 航空动力学报, 2011, 26(3): 656-661.
Han Shaobing, Zhong Jingjun, Yan Hongming.Influence of suction-side winglet length on tip leakage flow in compressor cascade[J]. Journal of Aerospace Power, 2011, 26(3): 656-661.
[10] 周治华, 陈绍文, 兰云鹤, 等. 叶顶间隙对某涡轮级流场及气动性能影响的数值研究[J]. 中国电机工程学报, 2015, 35(5): 1176-1182.
Zhou Zhihua, Chen Shaowen, Lan Yunhe, et al.Numerical investigation on the effect of tip clearance on a turbine stage flow-field and aerodynamic performance[J]. Proceedings of the CSEE, 2015, 35(5): 1176-1182.
[11] Yang M, Martinez-Botas R, Zhang Y, et al.Effect of self-recirculation-casing treatment on high pressure ratio centrifugal compressor[J]. Journal of Propulsion and Power (S0748-4658), 2016, 32(1): 602-610.
[12] 刘建勇, 袁巍, 郝晓林, 等. 非对称处理机匣周向分区数的实验[J]. 推进技术, 2009, 30(4): 434-438.
Liu Jianyong, Yuan Wei, Hao Xiaolin, et al.Experiment on treating block number of non-axisymmetric casing treatment[J]. Journal of Propulsion Technology, 2009, 30(4): 434-438.
[13] Wisler D C, Beacher B F.Improved compressor performance using recessed clearance (Trenches)[J]. Journal of Propulsion and Power (S0748-4658), 1989, 5(4): 469-475.
[14] Hembera M, Danner F C T, Brignole G A, et al. Numerical design and optimization of casing treatments for transonic axial compressors[C]// 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. USA: American Institute of Aeronautics and Astronautics, 2008 (5063): 1-12.
[15] 蔡涛, 周水清, 王军, 等. 加环控制轴流风机叶顶间隙的分析与试验[J]. 工程热物理学报, 2014, 35(12): 2406-2411.
Cai Tao, Zhou Shuiqing, Wang Jun, et al.Analysis and test on the performance of the axial fan with a ring near the blade tip on the casing[J]. Journal of Engineering Thermophysics, 2014, 35(12): 2406-2411.
[16] Porreca L, Kalfas A I, Abhari R S. Optimized shroud design for axial turbine aerodynamic performance [J]. Journal of Turbomachinery (S0889-504X), 2008, 130(3): 031016-1-031016-12.
[17] Satish Koyyalamudi V, Nagpurwala Q H.Stall margin improvement in a centrifugal compressor through inducer casing treatment[J]. International Journal of Rotating Machinery (S1023-621X), 2016, 2016: 1-19.
[18] 昌泽舟. 轴流式通风机实用技术 [M]. 北京: 机械工业出版社, 2005: 43-44.
Chang Zezhou.Practical techniques of axial flow fans [M]. Beijing, China: China Machine Press, 2005: 43-44.
[19] 叶学民, 李俊, 王松岭, 等. 动叶可调轴流式通风机叶片安装角异常工况下的气动特性[J]. 中国电机工程学报, 2009, 29(26): 79-84.
Ye Xuemin, Li Jun, Wang Songling, et al.Aerodynamics of adjustable blade axial fan under abnormal installation angles[J]. Proceedings of the CSEE, 2009, 29(26): 79-84.
[20] 索洛玛霍娃 T C. 通风机气动略图和性能曲线 [M]. 北京: 煤炭工业出版社, 1986.
Coлoy Mahuo Peьehkкom T C. Ventilation pneumatic schematic and performance curve [M]. Beijing, China: China Coal Industry Press, 1986
[21] 许剑. 高效对旋风机的流场特征研究与设计优化 [D]. 北京: 中国科学院工程热物理研究所, 2011.
Xu Jiang.Flow field characteristics research and design optimization for a high efficiency counter-rotating fan [D]. Beijing, China: Institute of Engineering Thermo Physics, Chinese Academy of Sciences, 2011.
[22] 李小芹, 李岩, 丁涛, 等. 工程流体力学 [M]. 北京: 中国水利水电出版社, 2009: 209-210.
Li Xiaoqin, Li Yan, Ding Tao, et al.Engineering Fluid Mechanics [M]. Beijing, China: China Water and Power Press, 2009: 209-210.
[23] 竺晓程. 轴流通风机转子叶顶区流场的实验和数值研究 [D]. 上海: 上海交通大学, 2003.
Zhu Xiaocheng.Experimental and numerical investigation of flow field in the tip region of an axial flow fan rotor [D]. Shanghai, China: Shanghai Jiaotong University, 2003.
[24] 叶学民, 李新颖, 李春曦. 两级动叶可调轴流风机内流特征的数值模拟[J]. 动力工程学报, 2013, 33(11): 871-877.
Ye Xuemin, Li Xingying, Li Chunxi, et al.Numerical simulation on internal flow field of a two-stage variable vane axial flow fan[J]. Power Engineering, 2013, 33(11): 871-877.

动叶可调轴流风机叶顶间隙形态的优化研究

Optimization of Tip Clearance Patterns of Variable-pitch Axial Flow Fan

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	李春曦, 张丹, 叶学民. 动叶可调轴流风机叶片磨损的仿真研究[J]. 系统仿真学报, 2018, 30(5): 1762-1771.
[2]	叶学民, 张建坤, 李春曦. 叶顶改型对双级轴流风机性能影响的仿真研究[J]. 系统仿真学报, 2018, 30(4): 1511-1519.