系统仿真学报 ›› 2018, Vol. 30 ›› Issue (9): 3526-3532.doi: 10.16182/j.issn1004731x.joss.201809037

• 仿真应用工程 • 上一篇    下一篇

有源相控阵天线散热特性的数值仿真

王勇1, 卢婷2, 吴龙文2, 熊长武1, 翁夏1, 杜平安2   

  1. 1. 中国电子科技集团公司第十研究所,四川 成都 610036;
    2. 电子科技大学,四川 成都 611731
  • 收稿日期:2016-11-25 出版日期:2018-09-10 发布日期:2019-01-08
  • 作者简介:王勇(1961-),男,四川郫县,硕士,研究员,研究方向为电子设备热设计及结构设计。
  • 基金资助:
    国防基础科研计划重点项目(JCKY2013210B004)

Numerical Simulation of Thermal Properties of Active Phased Array Antenna

Wang Yong1, Lu Ting2, Wu Longwen2, Xiong Changwu1, Weng Xia1, Du Ping'an2   

  1. 1. China Electronics Technology Group Corporation No.10 Research Institute, Chengdu 610036, China;
    2. University of Electronic Science and Technology of China, Chengdu 611731, China
  • Received:2016-11-25 Online:2018-09-10 Published:2019-01-08

摘要: 为降低数值仿真中热分析模型的建模难度减少网格数量节约计算成本,提出利用基于网格优先级建模方法和多级网格划分算法对采用微小流道液冷散热方式的有源相控阵天线模型进行热仿真分析。其中多级网格算法在不改变模型内部的网格数量,可对天线复杂部件进行贴体网格划分,明显提高网格质量。通过仿真计算和实验结果表明,该分析方法可获得天线关键部件的温度和压力分布。在保证高精度计算条件下,该建模方法和网格划分方法可提高计算效率,具有一定的工程应用价值。

关键词: 网格优先级建模方法, 多级网格划分算法, 微/小流道, 有源相控阵天线, 热仿真

Abstract: The grid priority modeling and multi-level meshing techniques are applied to analyze the thermal properties of the active phased array antenna with the micro/mini channels cooling method for simplifying modeling process, reducing the mesh quantity and saving the cost of computation effectively. The multi-level meshing technique can refine the mesh near the boundary of the complex components significantly without changing the mesh quantity in the model, which improves the mesh’s quality obviously. Through the thermal simulation and experiment measurement of the antenna, the temperature and pressure field are obtained. It is proved that the addressed approach can advance the calculation efficiency and better simulation accuracy, which has an important engineering application value.

Key words: grid priority modeling technique, multi-level meshing technique, micro/mini channels, active phased array antenna, thermal simulation

中图分类号: