条纹管成像激光雷达仿真技术研究

doi:10.16182/j.issn1004731x.joss.201612021

系统仿真学报 ›› 2016, Vol. 28 ›› Issue (12): 3027-3033.doi: 10.16182/j.issn1004731x.joss.201612021

条纹管成像激光雷达仿真技术研究

夏文泽, 韩绍坤, 曹京亚

北京理工大学光电学院,北京 100081

收稿日期:2015-03-25 修回日期:2015-05-01 出版日期:2016-12-08 发布日期:2020-08-13
作者简介:夏文泽(1990-),男,山东,博士,研究方向为激光成像。
基金资助:
国家自然科学基金(61275018),国际科技合作项目(2015DFR10830),部委研究基金( 9140A07040913BQ01104)

Simulation Technology Research on Streak Tube Imaging Lidar

Xia Wenze, Han Shaokun, Cao Jingya

School of Opto-Electronics , Beijing Institute of Technology, Beijing 100081, China

Received:2015-03-25 Revised:2015-05-01 Online:2016-12-08 Published:2020-08-13

摘要/Abstract

摘要： 提出了一种条纹管成像激光雷达的仿真模型。在仿真模型中,激光雷达距离方程、发射激光脉冲模型和扫描方程被使用;对系统噪声组成进行了分析。实验结果证明了仿真模型的有效性,并分析了发射激光峰值功率对重构后距离像精度的影响。为条纹管成像激光雷达的设计提供了理论指导和效果预判。

关键词: 条纹管, 距离方程, 激光雷达仿真, 距离像, 成像仿真

Abstract: A simulation model on streak tube imaging lidar was introduced. The range equation of lidar, the pulse model of illuminating laser and the scanning equation were used in the model. The system noise was analyzed. The experiment result shows the effectiveness of proposed simulation model. The effect of the pulse laser peak power on distance precision of reconstructed range image was analyzed. This method provided theoretical guidance and desired result inspection for designing of the streak tube imaging lidar.

Key words: streak tube, range equation, lidar simulation, range image, imaging simulation

中图分类号:

TP391.9

夏文泽, 韩绍坤, 曹京亚. 条纹管成像激光雷达仿真技术研究[J]. 系统仿真学报, 2016, 28(12): 3027-3033.

Xia Wenze, Han Shaokun, Cao Jingya. Simulation Technology Research on Streak Tube Imaging Lidar[J]. Journal of System Simulation, 2016, 28(12): 3027-3033.

参考文献

[1] 段琢华, 蔡自兴, 于金霞. 激光雷达异常检测及鲁棒测量模型[J].系统仿真学报, 2008, 20(6): 1500-1503.
(Duan Zhuohua, Cai Zixing, Yu Jinxia. Robust measurement model for laser range finder, 2008, 20(6): 1500-1503.)
[2] 何劲, 张群, 杨小优. 逆合成孔径成像激光雷达系统建模及成像仿真[J].系统仿真学报, 2012, 24(3): 632-637.
(He Jin, Zhang Qun, Yang Xiaoyou.System modeling and imaging simulation of ISAIL. Journal of System Simulation 2012, 24(3): 632-637.)
[3] 赵文, 韩绍坤. 3D非扫描成像激光雷达距离精度的Cramer-Rao下限[J]. 北京理工大学学报, 2014, 34(5): 501-505.
(Zhao Wen, Han Shaokun.Cramer-Rao lower bound for the range accuracy of 3D flash imaging lidar system. Transactions of Beijing Institute of Technology, 2014, 34(5): 501-505.)
[4] 马晨宁, 赵文, 韩绍坤, 等. 条纹管成像激光雷达条纹数据提取算法[J]. 中国激光, 2012, 39(4): 195-199.
(Ma Chenning, Zhao Wen, Han Shaokun, Wang Ping.Data extraction algorithm for streak tube imaging lidar[J]. Chinese Journal of Lasers, 2012, 39(4): 195-199.)
[5] 魏靖松. 条纹管激光雷达成像技术研究 [D]. 哈尔滨: 哈尔滨工业大学, 2013.
(Wei Jinsong.Imaging technology of streak tube lidar [D]. Harbin, China: Harbin Institute of Technology, 2013.)
[6] Hubbard B E.Streak tube imaging LIDAR and the virtual periscope [C]// Proceedings of the 55th International Symposium & Exhibition (S0277-786X). USA: IOP Publishing Ltd., 2008: 9-24.
[7] Richmond R D, Stephen C C.Direct-Detection LADAR Systems [B]. Bellingham, USA: SPIE Press, 2009: 15-25.
[8] Goodman J W.Statistical Optics [B]. New York, USA: Wiley, 1985: 347-348.
[9] Kriss M, Parulski K, Lewis D.Critical technologies for electronic still imaging systems[C]// Proceedings of Applications of Electronic Imaging (S0277-786X). USA, 1989: 157-183.

条纹管成像激光雷达仿真技术研究

Simulation Technology Research on Streak Tube Imaging Lidar

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	李小琳, 程禹, 臧海飞, 汪书阁, 刘栗, 袁晴晴. 高分辨距离像回波模拟与验证[J]. 系统仿真学报, 2020, 32(11): 2218-2225.
[2]	曹京亚, 韩绍坤, 夏文泽, 王亮. 一种条纹管多光谱激光三维成像系统的仿真算法[J]. 系统仿真学报, 2019, 31(2): 283-293.
[3]	王晨昊. 基于几何映射的遥感成像光照仿真方法[J]. 系统仿真学报, 2015, 27(3): 579-583.
[4]	陆志沣, 高文, 洪泽华, 赖鹏. 高逼真度红外复杂场景动态实时生成技术研究[J]. 系统仿真学报, 2015, 27(1): 76-81.