基于刻痕的云南绝版套刻的数字模拟合成

doi:10.16182/j.issn1004731x.joss.201612005

系统仿真学报 ›› 2016, Vol. 28 ›› Issue (12): 2912-2917.doi: 10.16182/j.issn1004731x.joss.201612005

基于刻痕的云南绝版套刻的数字模拟合成

李杰, 侯剑侠, 王雪松, 徐丹, 普园媛

云南大学,云南省昆明 650091

收稿日期:2014-10-22 修回日期:2015-02-05 出版日期:2016-12-08 发布日期:2020-08-13
作者简介:李杰(1989-),男,江苏,硕士,研究方向为非真实感图形绘制;侯剑侠(1989-),男,湖南,硕士,研究方向为图像分割;王雪松(1988-),男,内蒙古,硕士,研究方向为非真实绘制。
基金资助:
国家自然科学基金(61163019,61271361)

Digital Simulation and Synthesis of Yunnan Out-of-print Woodcuts Based on Nicks

Li Jie, Hou Jianxia, Wang Xuesong, Xu Dan, Pu Yuanyuan

Yunnan University, Kunming 650091, China

Received:2014-10-22 Revised:2015-02-05 Online:2016-12-08 Published:2020-08-13

摘要/Abstract

摘要： 木刻版画是一种以刀为笔,以板为纸的绘画艺术,云南绝版套刻是它的一种延伸。通过在同一块木板上的多次套印而产生色彩重叠的效果。结合云南绝版套刻的创作过程,我们提出一种自动化的基于刻痕的云南绝版套刻的数字模拟合成方法。通过颜色聚类将图像分割,求出一个平滑的反应图像梯度变化的向量场,根据向量场自动生成均匀分布的流线图,再在流线图上放置刻痕,结合XDOG方法生成的风格化边缘完成图像的绘制。由于使用了取自于真实木刻画中的刻痕,避免了复杂的建模与计算,绘制过程简单快速,无需复杂的人机交互,模拟结果较好。

关键词: 云南绝版套刻, 版画, 向量场, XDOG

Abstract: Woodcut printing is a painting, in which knife and wood block are used instead of pen and paper. Yunnan out-of-print woodcut is an extension of the woodcut printing. By working with a single block and multiple printings, Yunnan out-of-print woodcut can produce special effects of color overlap. Following the working process of it, an automatic method was studied based on nicks to synthesize a virtual Yunnan out-of-print woodcut. Image was sliced out by using color clustering. A global orientation field was got which reflected the gradient information. Real nicks guided by streamlines was placed based on orientation field. The image rendering was finished by using stylized edges which were got from XDOG. Because nicks from real woodcuts were used, the complicated calculations and modeling could be avoided. The rendering is simple and efficient, while the simulated result looks good.

Key words: Yunnan out-of-print woodcuts, woodcuts, orientation field, XDOG

中图分类号:

TP391

李杰, 侯剑侠, 王雪松, 徐丹, 普园媛. 基于刻痕的云南绝版套刻的数字模拟合成[J]. 系统仿真学报, 2016, 28(12): 2912-2917.

Li Jie, Hou Jianxia, Wang Xuesong, Xu Dan, Pu Yuanyuan. Digital Simulation and Synthesis of Yunnan Out-of-print Woodcuts Based on Nicks[J]. Journal of System Simulation, 2016, 28(12): 2912-2917.

参考文献

[1] Kazi R H, Igarashi T, Zhao S, et al.Vignette: interactive texture design and manipulation with freeform gestures for pen-and-ink illustration[C]// Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. USA: ACM, 2012: 1727-1736.
[2] 叶鹏, 王长波, 朱巧明, 等. 一种融合区域笔划和梯度笔划的油画生成方法[J]. 图学学报, 2013, 34(4): 24-28.
[3] Lu C, Xu L, Jia J.Combining sketch and tone for pencil drawing production[C]// Proceedings of the Symposium on Non-Photorealistic Animation and Rendering. Eurographics Association. Switzerland: ACM, 2012: 65-73.
[4] 夏三鳌. 基于NPR 技术的三维水墨动画研究 [D]. 长沙:湖南大学, 2013.
[5] 李岳. 剪纸画的计算机仿真方法研究 [D]. 大连: 辽宁师范大学, 2011.
[6] 唐颖, 房宽峻, 付少海, 等. 蜡染冰纹的计算机仿真研究[J]. 纺织学报, 2010, 7(3): 128-132.
[7] 普园媛. 云南重彩画艺术风格的数字模拟及合成技术研究 [D]. 昆明: 云南大学, 2010.
[8] Mizuno S, Okada M, Toriwaki J.Virtual Sculpting and Virtual Woodcut Printing[J]. The Visual Computer (S0178-2789), 1998, 14(2): 39-51.
[9] Mizuno S, Okada M, Toriwaki J.An Interactive Designing System with Virtual Sculpting and Virtual Woodcut Printing[J]. Computer Graphics Forum (S1467-8659), 1999, 18(3): 183-194.
[10] Mizuno S, Kasaura T, Yamamoto S, et al.Automatic Generation of Virtual Woodblocks and Multicolor Woodblock Printing[J]. Computer Graphics Forum (S1467-8659), 2000, 19(3): 51-58.
[11] Mizuno S, Okada M, Toriwaki J, et al.Improvement of the Virtual Printing Scheme for Synthesizing Ukiyo-e[C]// Proceedings of the 16th International Conference on Pattern Recognition, Los Alamitos, USA. California, USA: IEEE Computer Society, 2002: 1043-1046.
[12] Mello V B, Jung C R, Walter M.Virtual Woodcuts from Images[C]// Proceedings of the 5th International Conference on Computer Graphics and Interactive Techniques, Perth, Australia. New York, USA: ACM, 2007: 103-109.
[13] Winnemoller H.XDoG: Advanced Image Stylization with eXtended Difference-of-Gaussians[C]// Proceedings of the ACM SIGGRAPH /Eurographics Symposium on NPAR, Vancouver, Canada. USA: ACM, 2011: 147-156.
[14] Chen C W.Image segmentation via adaptive K-mean clustering and knowledge-based morphological operations with biomedical applications[J]. IEEE Transactions on Image Processing (S1941-0042), 1998, 7(12): 1673-1683.
[15] Way D L, Lin K Y, Ho Y W, et al.The brush stroke rendering for Chinese colored ink painting[J]. International Journal of Scientific Knowledge (S2305-1493), 2014, 4(7): 1-8.
[16] Kang H, Lee S, Chui K C.Coherent line drawing[C]// Proceedings of the 5th international symposium on NPAR. San Diego, USA. New York, USA: ACM, 2007: 43-50.
[17] Rao A R.Computing oriented texture fields[C]// Proceedings of Computer Vision and Pattern Recognition, San Diefo, USA. New York, USA: Springer, 1989: 61-68.

基于刻痕的云南绝版套刻的数字模拟合成

Digital Simulation and Synthesis of Yunnan Out-of-print Woodcuts Based on Nicks

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价