系统仿真学报 ›› 2016, Vol. 28 ›› Issue (11): 2790-2797.doi: 10.16182/j.issn1004731x.joss.201611021

• 仿真应用工程 • 上一篇    下一篇

基于测风塔测风数据的风电机组机舱风速修正

高峰1, 杨锡运1, 王伟1, 张磊2   

  1. 1.华北电力大学控制与计算机工程学院,北京 102206;
    2.大唐(赤峰)新能源有限公司,赤峰 024400
  • 收稿日期:2015-03-16 修回日期:2015-09-16 出版日期:2016-11-08 发布日期:2020-08-13
  • 作者简介:高峰(1976-),男,山东滨州,博士,讲师,研究方向为风力发电机组建模与性能评估;杨锡运(1973-),女,内蒙,博士,副教授,研究方向为新能源发电技术。
  • 基金资助:
    中央高校基本科研业务费(2015MS24)

Nacelle Wind Speed Correction of Wind Turbine Generation Units Based on Wind Speed Measured by Anemometer Tower

Gao Feng1, Yang Xiyun1, Wang Wei1, Zhang Lei2   

  1. 1. School of Control and Computer Engineering, North China Electric Power University, Beijing 102206, China;
    2. Datang Corporation (Chifeng) Renewable Limited Co., Chifeng 024400, China
  • Received:2015-03-16 Revised:2015-09-16 Online:2016-11-08 Published:2020-08-13

摘要: 针对机舱风速理论修正方法计算偏差较大的问题,根据风力发电机组控制策略对整个风速范围进行分区,通过高阶多项式拟合来确定机舱风速传递函数,建立一种基于测风塔测风数据的机舱风速修正方法。采用该方法进行风速修正不仅能够克服IEC机舱传递函数实用性较差的问题,而且较不分区的简单线性拟合又具有较高的拟合精度,通过引入过渡区间改进了分段机舱传递函数所存在的不连续问题。算例结果与数据分析表明了该机舱风速修正方法的优越性。

关键词: 风力机, 机舱风速, 风速修正, 机舱传递函数

Abstract: In consideration that there are great calculation errors in theoretical correction of nacelle wind speed, the entire range of wind speed was divided according to changes of control strategies for wind turbine generation unit. The nacelle transfer function (NTF) was defined by higher-order polynomial fitting to identify a method for correcting nacelle wind speed based on wind measurements of the anemometer tower. It doesn’t only overcome problems like poor practicability of IEC standards NTF, but also has higher fitting precision than simple linear fitting without intervals. By introducing intermediate intervals, the problem about discontinuous NTF in different sections has been improved. The calculation example suggest that the above method is high advantageous in correcting nacelle wind speed.

Key words: wind turbine, nacelle wind speed, wind speed correction, nacelle transfer function

中图分类号: