[1] 杨延峰, 张跃明, 张玲爱, 等. 弧面分度凸轮廓面的加工[J]. 现代制造工程, 2005(5): 69-72. Yang Yanfeng, Zhang Yueming, Zhang Ling’ai, et al.Manufacturing of profile of globoidal indexing cam[J]. Modern Manufacturing Engineering, 2005(5): 69-72. [2] 胡自化, 张平, 漆瑞. 连续分度空间弧面凸轮的多轴数控加工工艺研究[J]. 中国机械工程, 2005, 16(24): 2184-2187. Hu Zihua, Zhang Ping, Qi Rui.A Study on Multi-axis NC Machining Processes for Continuous Indexing Globoidal Cams[J]. China Mechanical Engineering, 2005, 16(24): 2184-2187. [3] Tsay D M, Ho H C.Consideration of Manufacturing Parameters in the Design of Grooved Glohoidal Cam Indexing Mechanisms[J]. Journal of Engineering Manufacture, 2001, 215(1): 95-103. [4] 刘昌祺, 牧野洋, 曹西京. 凸轮机构设计[M]. 北京: 机械工业出版社, 2005: 35-50. Liu Changqi, Mu Yeyang, Cao Xijing.Cam mechanism design[M]. Bei Jing: Machinery Industry Press, 2005: 35-50. [5] 孔马斌, 胡自化, 李慧, 等. 基于等距曲面的弧面凸轮单侧面数控加工刀位优化算法[J]. 机械工程学报, 2008, 44(11): 277-282. Kong Mabin, Hu Zihua, Li Hui, et al.New Cutter-location Optimization Algorithm and Error Analysis for Five-axis Flank Milling of Integral Impeller[J]. Journal of Mechanical Engineering, 2008, 44(11): 277-282. [6] 尹明富, 赵镇宏. 弧面分度凸轮单侧面加工原理及刀位控制方法研究[J]. 中国机械工程, 2005, 16(2): 127-130. Yin Mingfu, Zhao Zhenhong.Study on one—side machining principle and tool path control method of the globoidal cam[J].China Mechanical Engineering, 2005, 16(2): 127-130. [7] J N Lee. Interference-free Tool Path Generation using Enveloping Element for Five-axis Machining of Spatial Cam[J]. Journal of Materials Processing Technology, 2007, 187/188: 1-10. [8] 何有钧, 邹慧君, 郭维忠, 等. 空间凸轮刀位补偿加工方式中理论加工误差的研究[J].中国机械工程, 2001, 12(9): 997-999. He Youjun, Zou Huijun, Guo Weizhong, et al.Study on Theoretical Manufacturing Error Caused by Off-set Compensation in NC Machining for Spatial Cam[J]. China Mechanical Engineering, 2001, 12(9): 997-999. [9] 葛正浩, 梁辰, 别瑜, 等. 弧面分度凸轮的非等价加工研究及误差分析[J]. 机械传动, 2016, 40(5): 43-45. Ge Zhenghao, Liang Chen, Bie Yu, et al.Study on the Non-equivalent Machining and Error Analysis of Globoidal Indexing Cam[J]. Journal of Mechanical Transmission, 2016, 40(5): 43-45. [10] 程伟, 张跃明, 卜凡华. 弧面分度凸轮数控加工工艺研究[J]. 机械设计与制造, 2011(3): 171-173. Cheng Wei, Zhang Yueming, Bu Fanhua.Study on the CNC processing of globoidal cam[J]. Machinery Design & Manufacture, 2011(3): 171-173. [11] 郑武. 弧面分度凸轮的廓面误差补偿及基于SolidWorks的运动仿真[D]. 西安: 西安理工大学, 2002. Zheng Wu.The Profile Error Compensatation of Globoidal Indexing Cam and the Movement Simulation Based on Solidworks[D]. Xi’an: Xi’an University of Technology, 2002. [12] 黄强, 张根保, 张新玉. 滚齿直接误差模型的建立与应用[J]. 系统仿真学报, 2009, 21(17): 5588-5593. Huang Qiang, Zhang Genbao, Zhang Xinyu.Building and Application of Direct Error Model for Gear Hobbing[J]. Journal of System Simulation, 2009, 21(17): 5588-5593. |