系统仿真学报 ›› 2021, Vol. 33 ›› Issue (4): 935-942.doi: 10.16182/j.issn1004731x.joss.19-0642

• 国民经济仿真 • 上一篇    下一篇

分体式开关磁阻双转子电机设计与电磁仿真

邓涛1, 邓凇2   

  1. 1.重庆交通大学 航空学院,重庆 400074;
    2.重庆交通大学 机电与车辆工程学院,重庆 400074
  • 收稿日期:2019-12-09 修回日期:2020-02-03 出版日期:2021-04-18 发布日期:2021-04-14
  • 作者简介:邓涛(1982-),男,博士,教授,研究方向为新能源汽车理论与应用。E-mail:d82t722@cqjtu.edu.cn
  • 基金资助:
    国家自然科学基金(51305473); 重庆市技术创新与应用发展专项重点项目(cstc2019jscx-fxydX0028); 重庆市教育委员会科学技术研究重点项目(KJZD-K202000701)

Design and Electromagnetic Simulation of Split Switched Reluctance Dual-Rotor Motor

Deng Tao1, Deng Song2   

  1. 1. Institute of Aeronautics, Chongqing Jiaotong University, Chongqing 400074, China;
    2. School of Mechatronics & Automobile Engineering, Chongqing Jiaotong University, Chongqing 400074, China
  • Received:2019-12-09 Revised:2020-02-03 Online:2021-04-18 Published:2021-04-14

摘要: 为解决传统混合动力汽车用双转子电机同心永磁式结构存在散热不良和磁场耦合等问题,将两个同尺寸开关磁阻电机通过联轴器机械连接起来,设计成一种新型分体式开关磁阻双转子电机(Split Switched Reluctance Dual-rotor Motor,SSR-DRM),分析其工作原理和多工况运行模式,进行参数设计、建模以及电磁静态和瞬态仿真,从磁力线分布、磁密、瞬态转矩与空载反电势等对比分析设计和仿真。结果表明:SSR-DRM的主、副电机在560 V直流电压下,额定转矩为80 N·m,额定转速为3 000 r/min,额定输出功率为25 kW,满足设计要求。

关键词: 分体式开关磁阻双转子电机, 结构设计, 参数设计, 电磁仿真

Abstract: There are some problems such as bad heat dissipation and electromagnetic coupling for the traditional dual-rotor motor of hybrid electric vehicles. Two SRMs of same size are mechanically connected through a coupling to form a dual-rotor motor with two rotors and one stator. A split switched reluctance dual-rotor motor (SSR-DRM) is innovatively designed. The working principle and multi-operating mode of SSR-DRM are analyzed, and the parameters design, modeling and electromagnetic simulation are implemented. The parameters of design and simulation are compared and analyzed from the aspects of magnetic line distribution, magnetic density, transient torque and no-load back EMF. The results show that under 560 V DC voltage, the split switched reluctance dual-rotor motor's rated torque is 80 N·m, rated speed is 3 000 r/min and rated output power is 25 kW. Simulation results meet the requirement of design.

Key words: split switched reluctance dual-rotor motor, structure design, parameter design, electromagnetic simulation

中图分类号: