系统仿真学报 ›› 2015, Vol. 27 ›› Issue (9): 2108-2116.

• 虚拟样机与虚拟制造技术 • 上一篇    下一篇

基于虚拟样机的多学科优化技术研究与应用

陶栾, 周军华, 侯宝存   

  1. 北京仿真中心,北京 100854
  • 收稿日期:2015-05-15 修回日期:2015-08-03 出版日期:2015-09-08 发布日期:2020-08-07
  • 作者简介:陶栾(1979-),女,黑龙江省虎林县人,高工,研究方向为多学科虚拟样机工程应用,虚拟采办仿真应用;周军华(1984-),男,湖北监利人,工程师,研究方向多学科虚拟样机仿真、优化设计等;侯宝存(1978-),男,陕西宝鸡人,研究员,研究方向为工程信息化及虚拟样机工程。
  • 基金资助:
    总装备部仿真预研项目(51304030304)

Research and Application of Multidisciplinary Optimization Technology Based on Virtual Prototyping

Tao Luan, Zhou Junhua, Hou Baocun   

  1. Beijing Simulation Center, Beijing 100854, China
  • Received:2015-05-15 Revised:2015-08-03 Online:2015-09-08 Published:2020-08-07

摘要: 以某型号工程研制阶段的虚拟样机优化设计应用需求为背景,介绍了武器装备系统虚拟样机多学科优化技术的总体框架、系统构成及应用案例等内容和5种多学科优化方法。结合复杂武器装备系统优化设计的主要问题,提出了切实可行的适用于复杂武器装备系统的基于局部子系统分析的IDF多学科虚拟样机优化框架(Local System Analysis IDF,LSA-IDF)。通过实际型号应用,构建了武器装备系统虚拟样机优化设计流程,实现了基于虚拟样机的智能优化设计,对课题应用成果进行了总结分析,提出了课题后续研究工作的方向。

关键词: 虚拟样机, 多学科优化方法, LSA-IDF, 优化设计流程

Abstract: The main body of the article briefed the total frame, composing, application case of multidisciplinary optimization technology for weapon equipment system,and introduced 5 kinds of multidisciplinary optimization method detailedly. It took a certain equipment's virtual prototyping optimization design requirement in the engineering develop phase as the background, and advanced the way of multidisciplinary virtual prototyping optimization based on local subsystem analysis viably, shortened form LSA-IDF. Then through an actual case application, the article constructed the weapon equipment system's virtual prototyping optimization design flow, actualized intelligent optimization design based on virtual prototyping. Finally it sums up the applying effect, and advances the project's future direction for the latter research work.

Key words: virtual prototyping, multidisciplinary optimization method, LSA-IDF, optimization design flow

中图分类号: