[1] 付主木, 高爱云, 费树岷, 等. 集装箱桥吊多模型参考切换双闭环防摇控制[J]. 机械工程学报, 2011, 47(23): 161-166. [2] Mun-Soo Park, Dongkyoung Chwa, Suk-Kyo Hong.Antisway Tracking Control of Overhead Cranes with System Uncertainty and Actuator Nonlinearity Using an Adaptive Fuzzy Sliding-Mode Control[J]. IEEE Transactions on Industrial Electronics (S0278-0046), 2008, 55(11): 3972-3984. [3] Singer NC, Seering WP.Preshaping Command Inputs to Reduce System Vibration[J]. Journal of Dynamic Systems Measurement and Control-Transactions of The ASME (S0022-0434), 1990, 112(1): 76-82. [4] 吴楠. 单级倒立摆系统角运动控制方案建模及仿真[J]. 系统仿真学报, 2003, 15(9): 1333-1336. [5] Vaughan Joshua, Kim Dooroo, Singhose William.Control of Tower Cranes with Double-Pendulum Payload Dynamics[J]. IEEE Transactions on Control Systems Technology (S1063-6536), 2010, 18(6): 1345-1358. [6] Masoud Ziyad N, Alhazza Khaled A.Frequency- Modulation Input Shaping Control of Double-Pendulum Overhead Cranes[J]. Journal of Dynamic Systems Measurement and Control-Transactions of the ASME (S0022-0434), 2014, 136(2): 1-11. [7] 钟斌, 程文明, 吴晓, 等. 桥门式起重机吊重防摇状态反馈控制系统设计[J]. 电机与控制学报, 2007, 11(5): 492-496. [8] Le Tuan Anh, Kim Gook-Hwan, Kim Min Young.Partial Feedback Linearization Control of Overhead Cranes with Varying Cable Lengths[J]. International Journal of Precision Engineering and Manufacturing (S2234-7593), 2012, 13(4): 501-507. [9] 刘华森, 程文明, 易嘉伟. 欠驱动的倒三角铁路集装箱门式起重机吊具动力学建模与分析[J]. 中国铁道科学, 2015, 36(02): 103-110. [10] Singhose W, Seering W, Singer N.Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs[J]. Journal of Mechanical Design (S1050-0472), 1994, 116(2): 654-659. [11] Quang Hieu Ngo, Hong Keum-Shik.Skew control of a quay container crane[J]. Journal of Mechanical Science and Technology (S1738-494X), 2009, 23(12): 3332-3339. [12] 董明晓, 脱建智, 任意翔, 等. 最优输入整形抑制变参数桥式起重机载荷摆动[J]. 振动与冲击, 2009, 28(10): 207-209. [13] 李兵, 谢里阳, 魏玉兰, 等. 基于时间优化的多模态输入整形法抑制柔性系统的振动[J]. 东北大学学报自然科学版, 2010, 31(9): 1337-1340. [14] 赵志刚, 游斌弟, 赵阳. 改进型负输入整形与最优控制结合的振动抑制方法[J]. 振动与冲击, 2014, 33(8): 202-208. [15] 王晓军, 邵惠鹤. 基于输入整形的线性二次型调节器及其应用[J]. 上海交通大学学报, 2006, 40(5): 848-851. [16] 董明晓, 宋传增, 梅雪松. PD结合输入整形抑制单模态弹性机构振动仿真研究[J]. 机械工程学报, 2010, 46(13): 135-140. |